Turbo & Supercharger

Genuine Subaru Turbo Dump Gasket

Suits All Traditional Single Scroll Turbo EJ Engines 

Genuine Subaru Turbo Base/Up Pipe Gasket

Suits all traditional single scroll turbo EJ engines.

*If Unsure Please Confirm With VIN*

Genuine Subaru Turbo Oil Drain Hose 

Vehicle Fitment:

Direct Bolt-On for following models

• 1999-2000 Subaru WRX
• 2001-2007 Subaru WRX
• 1999-2000 Subaru STI
• 2001-2007 Subaru STI
• 2008-2014 Subaru STI
• 2015-2021 Subaru STI
• 1997-2002 Subaru Forester GT
• 2003-2008 Subaru Forester XT
• 1998-2003 Subaru Liberty GT (Single-Turbo Only)

Can fit to the models below however aftermarket intercooler with alternate traditional STI style hot-side intercooler hose is required

• 2008-2014 Subaru WRX
• 2008-2013 Subaru Forester XT
• 2007-2009 Subaru Liberty GT

• 2008-2014 Subaru WRX
• 2008-2013 Subaru Forester XT
• 2007-2009 Subaru Liberty GT

 IHI VF48L/Stage 2 Turbo Single Scroll

With an upgraded compressor wheel and reinforced bearings, capable for an added extra 20-30kw over the stock VF48.

The VF36 ball bearing turbo came out standard on the Subaru MY03 WRX Sti RA Spec C

MAC valves are used world-wide by many industry leading motorsport brands and workshops and is a brand you can trust.

Mac 35 Series Valve

The MAC 35 series is a direct solenoid operated 3-way poppet valve.  It features a short stroke solenoid, a balanced poppet and powerful return spring.  These features translate into high shifting forces, fast consistent response times, and long life.  Our unique balanced design means virsatility in piping – the valve can be configured as a 3-way or 2-way – normally closed or normally open or can be used for vacuum, divertor or selector applications. 

Features:

• Genuine MAC Solenoid Operated 3-Way Valve
• Turbosmart Silicone Vacuum Hose
• Nickel-Plated Barb Fittings
• Vehicle Specific Black Finish Bracket
• Vehicle Specific Plug-and-Play Wiring Harness

Tuning Notes:

Because this upgraded solenoid affects the way that your vehicle controls boost, it is always recommended that you consult with a tuner immediately following installation. It is not recommended that you drive the car in a way that builds boost without doing so. If you have any questions, don't hesitate to get in touch with us directly!

Suits:

• 08-21 STI

Using GFB’s TMS technology the Mach 2 can help return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears (more information below).

• Recirculation model for direct factory replacement for performance without the noise
• Atmosphere venting kits to convert the recirculating valve if you want noise with your performance

Like the Respons and Deceptor Pro II, the Mach 2 is available in a range of bolt-on kits for most popular turbo models. And when we say “bolt-on”, that’s exactly what we mean! No additional adaptors, parts or vehicle modifications are required – simply remove the factory bypass valve and replace it with the Mach 2 – it’s that simple!

The Mach 2 is configured as a 100% recirculating valve (i.e. bypass, plumb back) and add on kits are also available to convert to 100% atmosphere venting.

Use the recirc model for direct factory replacement when you want the performance WITHOUT the noise! Add the conversion kit when you want some noise with your performance!

Factory bypass valves have two main shortcomings – one is that they are typically designed to start opening above a certain pressure to protect the engine, and the other is they are not optimised for throttle response. Oh, and you can’t vent them to atmosphere without stalling your engine…
The Mach 2 solves all of these issues. It can effectively hold unlimited boost (unlimited in that no turbo could ever produce enough pressure to damage it), and the TMS technology ensures maximum throttle response

Suits:

• 05-07 XT Forester (Facelift)
• 01-07 Impreza WRX & STI
• 08-20 STI

Install Guide

So how much more can you do with a blow-off valve? Well, the Deceptor Pro II takes the ‘Respons’ concept even further...

• Remote proportional venting bias/volume control- from silent to loud or anywhere in between
• Sleek, compact in-car BOV volume controller with backlit dial
• End point adjustment to control maximum vent to atmosphere bias setting
• Volume adjustment mechanism driven by a high-torque geared electric motor
• Durable, low-friction gear train supported by precision sealed ball-bearing
• Supplied with all parts and wiring required to have it up and running quickly and easily

Suits:

• 01-07 Impreza WRX & STI  
  
• 08-21 STI Only
• 05-07 XT Forester (Facelift Model)

Install Guide

Featuring GFB’s patented venting bias adjustment system, the Respons allows you to precisely control how much air vents from each of the two outlets.

Why is this so important? Two key reasons:

Adjust how loud the blow-off sound is. Recirculate all of the air for silent factory operation, vent it all to atmosphere for maximum noise, or set it ANYWHERE in between to suit your preference.

Get a blow-off sound WITHOUT causing stalling, backfiring, or any other BOV-related issues, even on a car with a sensitive airflow meter (MAF).
Hold on, it gets better. The Respons isn’t just a noise-maker. It also;

• Offers better throttle response
• Faster boost recovery on gearshift
• Unlimited boost-holding!

For example, using GFB’s TMS (Turbo Management System) principle, tests show that the Respons can return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears.

Tuning Notes:

Because this upgraded solenoid affects the way that your vehicle controls boost, it is always recommended that you consult with a tuner immediately following installation. It is not recommended that you drive the car in a way that builds boost without doing so. If you have any questions, don't hesitate to get in touch with us directly!

Suits:

• 08-20 STI

Genuine Subaru VF48 Turbo Single Scroll 

Genuine Subaru VF52 Single Scroll Turbo