WRX 15-20

Genuine Subaru Sump Plug Gasket

Genuine Subaru Lower Ball Joint 

The most restrictive component of the factory exhaust system is the down-pipe which begins right after the turbocharger. Invidia Exhausts use a larger pipe diameter and smooth bends allows the turbocharger to exhale exhaust gases with fewer restrictions and turbulence. Because of these reasons, Invidia down-pipes make for the most popular exhaust upgrade that adds a substantial bump in both horsepower and torque with a great reduction in turbo lag.

To withstand the high temperatures seen at the turbocharger laser cut cast steel flanges are used to ensure long lasting leak free reliability. A High-Flow catalytic converted is utilised to control emissions for street driving legalities but with minimal impact to exhaust flow. Designed locally to suit Australian Specification Vehicles, this is a 100% bolt on installation for right-hand drive vehicles with no modifications or changes to the steering knuckle required.  Factory O2 sensor locations are also retained to ensure compatibility with factory systems.

New aluminum filler cap cover to brighten up the engine bay!

• Ceramic Stealth Advanced Technology for whisper quiet braking, silky smooth operation, noticeably less dust.
• Noise Absorbing Shims for reduced transmission of vibration and noise from the brake pad during extreme braking.

Suits:

When carrying out those finishing additions to your cars engine bay it’s the little touches that make all the difference and now you can secure your battery in style with the RCM Battery Clamp! CNC machined in the UK and finished in ultra durable military spec anodising then laser etched with the RCM logo for that extra seal of quality these clamps are a direct replacement for the somewhat plain standard offering!

Available in Black, Blue and Red to suit any engine bay this part is easy installed in minutes yet does a great job of lifting the overall appearance under your bonnet!

Now available exclusively from RCM is the Roger Clark Motorsport oil filler cap.

Manufactured from aluminium using high precision CNC techniques this detailed, quality oil filler cap gives your engine the Roger Clark Motorsport identity.

So how much more can you do with a blow-off valve? Well, the Deceptor Pro II takes the ‘Respons’ concept even further...

• Remote proportional venting bias/volume control- from silent to loud or anywhere in between
• Sleek, compact in-car BOV volume controller with backlit dial
• End point adjustment to control maximum vent to atmosphere bias setting
• Volume adjustment mechanism driven by a high-torque geared electric motor
• Durable, low-friction gear train supported by precision sealed ball-bearing
• Supplied with all parts and wiring required to have it up and running quickly and easily

Suits:

• 10-14 (BM, BR) Liberty GT 

Install Guide

So how much more can you do with a blow-off valve? Well, the Deceptor Pro II takes the ‘Respons’ concept even further...

• Remote proportional venting bias/volume control- from silent to loud or anywhere in between
• Sleek, compact in-car BOV volume controller with backlit dial
• End point adjustment to control maximum vent to atmosphere bias setting
• Volume adjustment mechanism driven by a high-torque geared electric motor
• Durable, low-friction gear train supported by precision sealed ball-bearing
• Supplied with all parts and wiring required to have it up and running quickly and easily

Suits:

• 14-On XT Forester SJ (FA20 Engine)
  
• 15-On WRX  (FA20 Engine)
  
• 16 On Levorg FB16/FA20 Turbo

Install Guide

Perrin Battery Hold Down Bracket

Hold your battery in place with style. Made from CNC machined aluminum and anodized black, red, neon yellow, or hyper teal for long lasting good looks!

Tie Down
The PERRIN Battery Tie Down is a quick and affordable upgrade. Keep your battery from moving in all situations.

Construction
The PERRIN Battery Tie Down is machined from billet aluminum with radiused edges and countersunk mounting holes.

In The Box:

• (1) PERRIN Battery Tie Down
• Warranty & Instructions

Perrin Oil Filler Cap

Complete Your Engine Bay
The PERRIN Aluminum oil cap is the finishing touch to your engine bay leaving a clean and tasteful look. PERRIN's stylish oil cap is prominently displayed sitting just to the right of the engine and is indexed so the PERRIN logo is always in the right spot.

Finish & Construction
Machined from 6061 Billet aluminum, the PERRIN Oil Fill Cap has a textured finish and is hard anodized in a black, red, neon yellow, or hyper teal finish for corrosion protection. For added convenience, the cap features a knurled grip section for easy removal and installation.

In The Box:

Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Notes: 

• 2 Links
  
• 4 Spacers
• 2 Bolts
• 4 Washers
• 2 Nuts
• Install Guide
• Grease

Suits:

Whiteline adjustable camber kits provide the ability to fine tune camber settings for optimum tyre contact resulting in improved vehicle handling and increased tyre life. The kit includes low compliance synthetic elastomer bushings which help maintain preferred alignment settings as well as providing enhanced steering response.

Notes: 
On-Car Adjustable Allows +/- 0.75deg camber
Kits Required: 1

Warranty: 3 Year / 60,000Kms
Kit Contents:

• 8 Bushings
• 4 Tubes
• 8 Bolts
• 8 Washers
• 4 Nuts
• Install Guide
• Grease

Suits:

• Subaru 12-20 BRZ/86  
  
• Subaru 08-13 SH, SJ Forester Incl Turbo
• Subaru 08-14 Impreza WRX & STI 
• Subaru 15-20  WRX & STI
• Subaru 15-20 Levorg 
• Subaru 09-20 BM,BR,BN, BS Liberty Incl Turbo & Outback 
• Subaru 12-20 XV 

A common serviceable item, worn joints exhibit excess movement and are commonly diagnosed simply from knocking and rattling noises coming from the upright or hub area. If worn and not replaced, these joints can have significant negative impact on wheel alignment and resulting uneven tyre wear or scrub. Whiteline's replacement joints boast superior internal joint structure for improved performance and durability. The outer housing also features a chamfered leading edge for ease of installation.

Notes: 

40.2mm OD spherical bearing
Kits Required: 1
Warranty: 3 Year / 60,000Kms
Kit Contents:

• 2 Bearings

Suits:

• Subaru 12-20 BRZ/86
• Subaru 08-18 SH, SJ Forester Incl Turbo
• Subaru 08-14 Impreza WRX & STI
• Subaru 15-20 WRX & STI
• Subaru 15-20 Levorg
• Subaru 15-20 BN,BS Liberty Incl Turbo & Outback
• Subaru 12-20 XV

Genuine Subaru Bottom Radiator Hose

Suits:

Genuine Subaru Spark Plug

NGK ILKAR8H6

Price is Per Plug

4x Required Per Car

Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

• 2 Links
• 4 Spacers
• 2 Bolts
• 8 Washers
• 2 Nuts
• Install Guide
• Grease

Suits:

• 08+ Forester
• 07-16 Impreza
• 08+ Impreza WRX
• 08+ Impreza WRX STI
• 15+ Levorg
• 09+ Liberty Incl Turbo
• 09-14 Outback
• 12+ XV
• 12+ BRZ/86

Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Notes: 

Adjustable extra heavy duty

Kits Required: 1

Warranty: 3 Year / 60,000Kms
Kit Contents:  

• 2 Links

• Install Guide

Suits:

• 13+ Forester SJ Incl Turbo
• 15+ Impreza WRX
• 15+ Impreza WRX STI
• 15+ Levorg 
• 09+ Liberty

Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 3 point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

• 1 Sway Bar
• 2 Bushings
• 2 Braces
• 2 Lateral Locks
• 2 Bolts
• 4 Washers
• Install Guide
• Grease

Suits:

•  08+ Forester
• 08-16 Impreza
• 08+ Impreza WRX
• 08+ Impreza WRX STI
• 15+ Levorg
• 09+ Liberty
• 09-14 Outback