Blue OEM Coolant Premix is a GENUINE GLYSANTIN® G30® Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved, Type "A" Ethylene glycol, Anti-Freeze Anti-Boil cooIant as used in initial manufacturer factory fills. It uses a technically advanced OAT (Organic Acid Technology) based inhibitor system that is Silicate, Phosphate, Amine, Borate and Nitrite free. The extended long life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system for 8 years or 500,000km.
Blue OEM Coolant Premix is mixed at a 50% concentration level as per initial OEM requirements.
PLEASE NOTE: Blue OEM Coolant Premix replaces 7 Year 450,000 KM Blue Coolant Premix, 5 Year Extended Drain Anti Freeze Anti Boil Premix Coolant and Blue Premix Coolant
Blue OEM Coolant Premix is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel and industrial engines where an OAT type anti-freeze / anti-boil and anti-corrosion properties are required.
Blue OEM Coolant Premix Coolant is suitable for passenger cars, 4WD's, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment. It is suitable for use with Australian, European, Asian & US vehicles It is Silicate, Borate and Phosphate Free making it particularly suitable for both European & Japanese vehicles that use blue coloured coolant such as Nissan, Subaru & Suzuki.
Blue OEM Coolant Premix provides long-term protection against rust and corrosion for all materials used in the engine and in the cooling system construction. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics used in the cooling system. It is particularly effective in all cast aluminium engines that are under load or used in extreme hot and cold climates.
Blue OEM Coolant Premix may be used in all types of vehicles that use blue coloured initial fill coolants and it is also suitable for use in out of warranty service to maintain OEM performance. It is also ideal for motorcycles.
Blue OEM Coolant Premix is a 50% concentration formulation and is ready to use directly from the container. It is pre-mixed with Penrite De-Mineralised Water and can be poured directly into the cooling system. No further dilution is required. It can be used as a complete service refill, top up or is safe to mix with compatible Type A coolant. Penrite recommend that a 50% concentration level should be maintained for maximum, performance and longevity of the coolant and protection of the cooling system.
Blue OEM Coolant is also available as a concentrate.
Penrite Radiator Flush effectively cleans the system in 7 minutes and prepares the cooling system for new coolant.
DOSE RATE - FREEZING POINT BOILING POINT
Mix Ratio 50%
Freezing Point -38°C
Boiling Point +109°C
- 8 Year 500,000km drain intervals if used and maintained at 50%
- OEM Approved to maintain manufacturer’s warranty & specifications
- Compatible with plastics, rubbers and seals.
- Protects all internal surfaces from corrosion, including aluminium.
- Phosphate free formulation allows use with hard water.
- Silicate, Nitrite, Nitrate and amine free.