350,000 KM Green Coolant Premix is a, Type A anti-freeze/anti-boil, silicate, phosphate and amine free cooIant, safe for all types of light and heavy duty vehicles. Its uses a technically advanced HYBRID (HOAT - Hybrid Organic Acid Technology) inhibitor formulation which provides a stable long life coolant that prevents rust, corrosion, cavitation and degradation of the cooling system. It is available in concentrate and premix forms.
350,000KM Coolant Premix is mixed at a 33% concentration level.
350,000 KM Green Coolant Premix is suitable for passenger cars, 4WDs, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment It can be used in Australian, European, Asian and US vehicles who specify a Hybrid (HOAT) type anti- freeze anti boil coolant.
350,000 KM Green Coolant Premix is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel and industrial engines where Type A anti-freeze / anti-boil and anti-corrosion properties are required. It provides long-term protection against rust and corrosion for all materials used in the engine and in the cooling system. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics. It is effective in all cast iron and aluminium engines that are under load or used in extreme hot and cold climates.
350,000 KM Green Coolant Premix may be used in all types of vehicles that use green, blue or yellow coloured initial fill coolants. It is also ideal for motorcycles.
350,000 KM Green Coolant Premix is a 33% concentration formulation and is ready to use directly from the container. It is pre-mixed with Penrite De-Mineralised Water and can be poured directly into the cooling system. No further dilution is required. It can be used as a complete service refill, top up and is safe to mix with compatible Type A coolants.
DOSE RATE - FREEZING POINT BOILING POINT
Mix Ratio 33% 50%
Freezing Point -18°C -38°C
Boiling Point +104°C +109°
When used as indicated and correctly maintained
Passenger Cars, 4WD, Light Commercial 350,000 KM
Heavy Duty On Highway 350,000 KM
Heavy Duty Off Highway 5,000 Hours
- 350,000km drain intervals if used and maintained between 33% & 50%
- Meets with many manufacturer' specifications
- Compatible with all plastics, rubbers and seals
- Protects all internal surfaces from corrosion, including aluminium
- Phosphate free formulation allows use with hard water
- Silicate and Amine free
- Suitable for Asian vehicles specifying non- silicate coolant