Products

Details:

• Core Size: 490 x 175 x 90mm
• Stainless steel hose clamps
• Re-enforced silicon y-pipe and throttle coupler

When developing the GC8 MY99 - MY00 Subaru WRX/STI Top Mounted Intercooler (TMIC), the goal was to make it the very best aftermarket top mounted intercooler of its kind!

 Details:

• Core Size: 490 x 175 x 90mm
• Stainless steel hose clamps
• Re-enforced silicon y-pipe and throttle coupler

Air Pump deletes are the perfect solution to removing the troublesome factory air pump system. CNC machined from Billet Aluminium and annodised in Black, these delete plates will cover the open ports on the cylinder heads with style. Included are two delete plates and stainless steel fasteners.

Vehicle Fitment:

• 2006-2014 Impreza WRX EJ25
• 2006-2020 Impreza WRX STI EJ25
• 2007-2009 Liberty GT EJ25
• 2008-2012 SH Forester XT EJ25

Note:

 Tuning is required after installation to resolve codes caused by removing air pump system.

Designed to elimate the possiblity of the Alternator Circuit being damaged due to a voltage surge that can occur with the use of a heavy duty single circuit Master switch.

When turned to the OFF position, the engine won’t run due to the power to the ignition relay or ignition coil circuit being cut. This prevents engine “Run on” and is an important safety factor in competition use. In addition, and to ensure the main vehicle electrical circuit is fully discharged, the resistor bleeds any residual voltage to ground.

Inlet Diameter 8mm
Outlet Diameter 8mm
Features • Longer Life - Quality internal components that protect against clogging
• Efficiant flow - Increased performance and fuel economy
• Meets or exceeds original manufacturers standards
• New car warranty protection

If Unsure Please Confirm Fitment 

Cabin Filter

Suits:

Established in 1988, SIRUDA high performance gasket is a renowned manufacturer of gasoline/diesel engine gaskets and overhaul kits for all major car brands. Having several decades of professional manufacturing experience, SIRUDA is also well known as the outstanding designer and developer of dies/molds for gaskets.  SIRUDA high performance gaskets are manufactured through the adoption of the most advanced production techniques and equipment.

SIRUDA’s goal is to provide highest quality to meet the need of the latest generation turbo-charged high speed engines running under the toughest condition. SIRUDA achieves it by controlling the entire manufacturing process - from designing, tooling, producing to the final products. Through continued product research and development, modern management and professional sales and marketing policy, SIRUDA has now become gasket of the first choice among motorsport circle.

Multiple Layer Steel Head Gaskets
This type of gasket has better strength against detonation and corrosion because it comprises of multi layers of steel. The outer layer is coated with HR-180. It has excellent sealing capability for high power engines.

HR RUBBER COATED MATERIAL
A Fluoroelastomer is a special purpose synthetic Rubber. It has wide chemical resistance and superior performance, especially in high temperature application in different media.
HR-180 rubber coated material that is heat-resistant to 250°C/ 482°F. HR-180 is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes.

Price is Per Gasket (2x Required)

Established in 1988, SIRUDA high performance gasket is a renowned manufacturer of gasoline/diesel engine gaskets and overhaul kits for all major car brands. Having several decades of professional manufacturing experience, SIRUDA is also well known as the outstanding designer and developer of dies/molds for gaskets.  SIRUDA high performance gaskets are manufactured through the adoption of the most advanced production techniques and equipment.

SIRUDA’s goal is to provide highest quality to meet the need of the latest generation turbo-charged high speed engines running under the toughest condition. SIRUDA achieves it by controlling the entire manufacturing process - from designing, tooling, producing to the final products. Through continued product research and development, modern management and professional sales and marketing policy, SIRUDA has now become gasket of the first choice among motorsport circle.

Multiple Layer Steel Head Gaskets
This type of gasket has better strength against detonation and corrosion because it comprises of multi layers of steel. The outer layer is coated with HR-180. It has excellent sealing capability for high power engines.

HR RUBBER COATED MATERIAL
A Fluoroelastomer is a special purpose synthetic Rubber. It has wide chemical resistance and superior performance, especially in high temperature application in different media.
HR-180 rubber coated material that is heat-resistant to 250°C/ 482°F. HR-180 is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes.

Price is Per Gasket (2x Required)

Established in 1988, SIRUDA high performance gasket is a renowned manufacturer of gasoline/diesel engine gaskets and overhaul kits for all major car brands. Having several decades of professional manufacturing experience, SIRUDA is also well known as the outstanding designer and developer of dies/molds for gaskets.  SIRUDA high performance gaskets are manufactured through the adoption of the most advanced production techniques and equipment.

SIRUDA’s goal is to provide highest quality to meet the need of the latest generation turbo-charged high speed engines running under the toughest condition. SIRUDA achieves it by controlling the entire manufacturing process - from designing, tooling, producing to the final products. Through continued product research and development, modern management and professional sales and marketing policy, SIRUDA has now become gasket of the first choice among motorsport circle.

Multiple Layer Steel Head Gaskets
This type of gasket has better strength against detonation and corrosion because it comprises of multi layers of steel. The outer layer is coated with HR-180. It has excellent sealing capability for high power engines.

HR RUBBER COATED MATERIAL
A Fluoroelastomer is a special purpose synthetic Rubber. It has wide chemical resistance and superior performance, especially in high temperature application in different media.
HR-180 rubber coated material that is heat-resistant to 250°C/ 482°F. HR-180 is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes.

Price is Per Gasket (2x Required)

KPM  injectors are developed with the highest precision engineering. All KPM Fuel System products are of the highest quality, through premium manufacturing processes. Our fuel injectors are serialised and individually characterised to ensure the highest level of performance and reliability.

Upgrading the fuel injection is vital once modifications are made to increase horsepower. Giving more flexibility for tuning and is necessary once the limit of the factory injectors/fuel system is reached.

Theses injectors are suitable for mild – heavily modified vehicles. Allowing increased fuel flow and developed for performance tuning. The injectors are a complete, machined, flow tested set. Along with the injectors we provide the scaling data used for precise tuning.

Vehicle compatibility: 

• BRZ/86

Includes Injector Connecter Adaptors Where Required

The timing belt guide provides your engine with extra insurance in the unfortunate event of one of the pulleys coming loose which can cause your belt to lose tension which can cause your pistons to make contact with the valves. More importantly, the Tomei unit is a direct replacement for the weaker design of the OEM unit.

• Straight cut from aluminum
• Designed with an extended length to securely apply more tension to the timing belt
• Ideal for those installing high-lift camshafts
• Helps eliminate belt whip
• Anodized black

Torque Solution Reversed Intake Manifold Alternator Relocation Bracket allows you to relocate the alternator to allow proper clearance and pipe routing when reversing the intake manifold on your EJ20 or EJ25. Our bracket is made from 6061 Billet Aluminum and then black anodized to help against any corrosion.

- 6061 Billet Aluminum
- Black Anodized
- Zinc Install Hardware Included
- Limited Lifetime Warranty

**Modification to OEM alternator bracket is required, as well as removal of your A/C. Custom turbo piping is required.

Torque Solution Reversed Intake Manifold Alternator Relocation Bracket Kit allows you to relocate the alternator to allow proper clearance and pipe routing when reversing the intake manifold on your EJ20 or EJ25. Our bracket is made from 6061 Billet Aluminum and then clear anodized to help against any corrosion. The kit adds a new alternator belt and idler pulley to complete the install.


- 6061 Billet Aluminum
- Includes New Alternator Belt and Idler Bearing
- Zinc Install Hardware Included
- Limited Lifetime Warranty

**Modification to OEM alternator bracket is required, as well as removal of your A/C. Custom turbo piping is required.

Torque Solution turbo Oil feed Line kit for Subaru EJ stock location configurations. The OEM oil feed hard lines are fragile and are easily damaged when swapping or working on your turbo. Our kit converts the hard lines to stainless steel braided -4an lines w/ T Fitting and provides all the necessary banjo fittings / copper washers to complete the job.

Features:

• -4an Stainless Steel Teflon Lines
• Zinc Coated Hardware for Corrosion Resistance
• Limited Lifetime Warranty

Fits:

• 2006-2014 WRX (EJ255)
• 2006-2020 STI (EJ257)
• 2003-2012 Forester XT (EJ255)
• 2007-2009 Liberty GT (EJ255)