HKS STAINLESS DUAL RESONATED FRONT PIPE BRZ/86

HKS STAINLESS DUAL RESONATED FRONT PIPE BRZ/86

$555.95

Tax included. Shipping calculated at checkout.

HKS STAINLESS DUAL RESONATED FRONT PIPE BRZ/86

The main part for the high output is the exhaust manifold shown on the right graph.

We recommend having a total full straight exhaust tuning by having more power by changing the muffler and exhaust manifold and tune the sound with the front pipe.
* If the exhaust manifold is changed, the engine check light might be turn on for a certain combination.

**Off Road Use Only**

HKS Race Suction Reloaded Air Intake Kit BRZ/86

$899.95

Tax included. Shipping calculated at checkout.

FEATURES

You can have strong power in the high RPM and better response from open and close of throttle with air flow adapter casting short suction pipe and heat insulator.
You don't need sound creator. The direct sound from the engine is good enough.
We have stabilised the intake air temperature by shutting off the hot air from the radiator and set the cooler for fresh air with a shroud.

HKS Hi-Power Spec-L Burnt Tip Cat Back Light Weight Exhaust BRZ/86

$2,295.95

Tax included. Shipping calculated at checkout.

HKS Hi-Power Spec-L Burnt Tip Cat Back Light Weight Exhaust BRZ/86

The HKS Hi-Power SPEC-L Exhaust System has been designed to enhance your driving experience. Because the 2.5” piping ID on this exhaust system is larger when compared to stock, it allows the exhaust flow to be significantly improved for more horsepower, and low-end torque.

However the benefits don’t stop there, your car will acquire a more aggressive exhaust tone as well. The HKS Hi-Power Spec-L exhaust system has been fabricated from 304 stainless steel, and features 100MM titanium tips to complement the exterior. This is a 100% bolt-on product that comes supplied with hardware to make for a ready installation.

The exhaust hangers have been welded on their factory locations to make for a great fitment.

HKS HI-POWER SPEC L 2 II BRZ/86

$2,243.95

Tax included. Shipping calculated at checkout.

HKS HI-POWER SPEC L 2 II BRZ/86

As light as Titanium
HKS has achieved a weight reduction comparable to the titanium exhaust system by utilizing ultra lightweight components for each part's material for pipes and silencers. The weight of the exhaust compared to factory one is reduced from about 30% up to 60%, which leads to improved driving performance.
Improved exhaust efficiency with a straight through structure
A straight through structure greatly improves exhaust efficiency. HKS also design exhaust for a sporty and comfortable sound based on each vehicle individual specifications.
Titanium tail tip cover
New series feature a titanium tail tip cover instead of carbon. Burnt titanium tail tips add to racing atmosphere. HKS now offer an optional tail tip cover*. There are three types of optional tail tip cover available. A standard titanium, a familiar carbon cover, and a new cool looking Neuse tail tip cover made with blue stainless steel.

HKS Billet Oil Filler Cap

$99.95

Tax included. Shipping calculated at checkout.

New aluminum filler cap cover to brighten up the engine bay!

HKS Oil Cooler Kit BRZ/86 NA Kit

$1,260.00

Tax included. Shipping calculated at checkout.

Newly designed single tube type fitting.
From engine bench tests and experience from D1 racing it is found that the oil pressure of the FA20 engine is extremely high compared to the conventional mass-produced engines. (Max oil pressure: over 12kgf/cm²) New single tube fitting withstanding the high oil pressure was newly designed and included in the kit.
Including the pre-assembled hose, bracket, and air guide and locating the core in front of the radiator enable an easy installation. Also, there is no major modification required to the chassis.
Special spacer and center bolts were designed exclusively for this kit to install the oil cooler attachment without modification.
The thin 15-layer core improves the cooling performance and makes installation easier.
This kit is applicable only to the NA engine.

Parts Included:

Oil Cooler Core / S-type Attachment / Spacer / Center Bolt / Banjo / Banjo Bolt / Bracket / Air guide / Accessory Parts

To suit NA Models only, other kits are to suit turbo/supercharged BRZ/86s

HKS Oil Cooler Kit BRZ/86 Pre 2016

$1,395.00

Tax included. Shipping calculated at checkout.

An Oil Cooler Kit from HKS will help keep the temperature of your engine oil down even on powerful tuned cars being driven hard.

While your car does have a cooling system, this is designed for an engine with standard power output being driven on the road in a relatively calm fashion. As soon as you're taking a car on track, tuning an engine for big power, or driving especially hard, you can see engine oil temperatures start to creep up.

This is bad because above a certain temperature engine oil starts to break down.

A HKS Oil-Cooler adds an external radiator through which the oil passes and is cooled much more effectively than by the stock system.

The kits come with a thermostat. Just as you don't want oil to be too hot, it also needs to reach a certain temperature to protect the engine properly. Adding a thermostat to the system stops the oil from being circulated through the cooler until it's reached the proper temperature ensuring the engine is protected when cold as well as hot. This is perfect for road usage where an engine can take quite some time to reach temperature.

Kits labelled as "Sandwich Plate" use a sandwich plate type connector.

Kits labelled as "Oil Filter Relocation" relocate the oil filter away from the standard location for clearance reasons.

Pre 08/16 Built BRZ/86

HKS Front Overpipe 1 Piece BRZ/86

$495.00

Tax included. Shipping calculated at checkout.

HKS releases a new exhaust joint pipe that goes in the middle of primary and secondary catalytic converter.

Stock φ54 pipe is a bottleneck even in the factory exhaust system. HKS pipe size is increased up to φ60 that greatly improves exhaust efficiency and goes great with bolt on turbo kit.

Stock φ54 pipe was purposely dented in several places for preventing interference with other vehicle parts (see photo). On the other hand, HKS joint pipe is φ60 and it was made in a layout without these dents. Due to the bigger bend radius than stock, the exhaust pressure is reduced and the power is increased.

HKS Oil Cooler Kit BRZ/86 2016+

$1,595.00

Tax included. Shipping calculated at checkout.

An Oil Cooler Kit from HKS will help keep the temperature of your engine oil down even on powerful tuned cars being driven hard.

While your car does have a cooling system, this is designed for an engine with standard power output being driven on the road in a relatively calm fashion. As soon as you're taking a car on track, tuning an engine for big power, or driving especially hard, you can see engine oil temperatures start to creep up.

This is bad because above a certain temperature engine oil starts to break down.

A HKS Oil-Cooler adds an external radiator through which the oil passes and is cooled much more effectively than by the stock system.

The kits come with a thermostat. Just as you don't want oil to be too hot, it also needs to reach a certain temperature to protect the engine properly. Adding a thermostat to the system stops the oil from being circulated through the cooler until it's reached the proper temperature ensuring the engine is protected when cold as well as hot. This is perfect for road usage where an engine can take quite some time to reach temperature.

Kits labelled as "Sandwich Plate" use a sandwich plate type connector.

Kits labelled as "Oil Filter Relocation" relocate the oil filter away from the standard location for clearance reasons.

Many of the kits are supplied with an air guide intended to channel air onto the cooler, even at angles off-centre (important for drivers collecting flies on their side windows). This will be indicated in the item subtitle.

08/16 Onwards Built BRZ/86

Please Select

FEATURES