Track Day Essentials

The bracket fits both drivers side and passenger side, suitable for both left-hand and right-hand drive. For an extra measure of safety, you can install a bracket and have fire extinguishers on both sides of your car.

About Kap Industries

Every Purchase Includes:

• 1 x Subaru Bracket Pre 2015
• 2 x M5 High Tensile Steel Nylocks
• 2 x M5 High Tensile Steel Hex Bolts

• Seat bolts are easily cross threaded.
• Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
• Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

The Original Fumoto Oil Drain Valve has been improving the way oil changes are performed since 1976. By replacing your oil drain plug with a Fumoto valve you can eliminate the mess and the need for tools in your oil change. Choosing Fumoto means no more messy oil spilled on your vehicle, clothes, and floor. Gone are the days of frozen drain plugs and stripped threads. All of a sudden drawing samples for oil analysis is as easy as one, two, three. It's time to upgrade your oil changes by choosing Fumoto. 

Features:

• The one-time drain plug replacement becomes your permanent oil changing solution
• Mess-free, tool-free oil changes that keep your hands, clothes, and floor clean.
• Money-saving DIY oil changes are now easier.
• The straight flow structure designed for quick oil draining.
• The valve is double-sealed from both ends to prevent leaks.
• Our original UP & TURN lever motions withstand any engine vibrations for no accidental openings.
• The lever clips provide additional security to the valves.
• All the valves are manufactured by our affiliated ISO-certified factory in Japan and leak-tested prior to being shipped.

Lever Clips for Precaution

When Fumoto valves are closed they are securely locked and will not open by themselves. Lever clips provide additional security to the valves and can only be attached when a lever is fully seated in the locked position. Installing a lever clip confirms that your valve is reliably locked and closed.

Broad Applications

Fumoto valves fit most engines and have been used in various applications. Cars, pickup trucks, buses, vans, commercial trucks, RVs, motorcycles, generators, boats, mowers, farm tractors, construction machines, industrial equipment, and many others. The valves are also not limited to oil drain ports but transmissions, air tanks and even to drain the coolant.

This Fire Extinguisher Bracket fits both Drivers Side and Passenger Side of the Toyota GT86 / Subaru BRZ / Scion FRS. Including Left Hand Drive and Right Hand Drive!

Made from 2mm Steel and Powder Coated Black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser-cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Every Purchase Includes:

• 1 x Toyota GT86/Subaru BRZ/Scion FRS Fire Extinguisher Bracket
• 2 x M5 High Tensile Steel Locknuts
• 2 x M5 High Tensile Steel Hex Bolts

How to Install:

1. Undo front seat bolts with an E Torx E10 or Socket that will fit.
2. Place the extinguisher cage on the bracket.
3. Lift the front of the seat and slip bracket under.
4. Reinstall bolts and tighten up each bolt.

Please Note:

• Seat bolts are easily cross-threaded.
• Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
• Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

Note: Does Not Include Fire Extinguisher

Fire Extinguisher Bracket designed for Subaru XV 

Including left hand drive and right hand drive!

Made from 2mm steel and powder coated black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Note: Does not include fire extinguisher in photo. 

Every Purchase Includes:

• 1 x Subaru XV Fire Extinguisher Bracket
• 2 x M5 High Tensile Steel Locknuts
• 2 x M5 High Tensile Steel Hex Bolts

Please Note:

• Seat bolts are easily cross threaded.
• Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
• Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

Fire Extinguisher Bracket designed for Subaru 2015 -2020 WRX and STI.

Including left hand drive and right hand drive!

Made from 2mm steel and powder coated black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Note: Does not include fire extinguisher in photo. 

Every Purchase Includes:

• 1 x Subaru WRX/STI 2015-2019 Fire Extinguisher Bracket
• 2 x M5 High Tensile Steel Locknuts
• 2 x M5 High Tensile Steel Hex Bolts

Please Note:

• Seat bolts are easily cross threaded.
• Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
• Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

350mm Diameter, 28mm dish (Flat) wheel, yellow stripe on top for reference. Includes horn button.

Fits all MOMO, Sparco, SAAS, Lifeline Boss/Hub Kits.

Suede leather. Italian Made.

• 5 tonne fade resistant webbing 6 eye catching colours for easy visibility & personal styling. 
• Metal eyelet fitting on one end which simply bolts to the chassis rail etc. 
• No more bruised ankles from metal tow hooks!  
• Overal length 26cm   
•  Loop diameter 13cm 
• 13mm Mounting Hole.

Features:

• 100% synthetic
• Formulated for racing use
• Extremely high dry boiling point
  • Dry 617F (325C)
  • Wet 400F (204C)
• Polyglycol base
• Standards: FMVSS 116 DOT 4 / SAE J1703

• Dry boiling point 594 degrees F
• Wet boiling point 399 degrees F.