Track Day Essentials

The bracket fits both drivers side and passenger side, suitable for both left-hand and right-hand drive. For an extra measure of safety, you can install a bracket and have fire extinguishers on both sides of your car.

 

About Kap Industries

Every Purchase Includes:

• 1 x Subaru Bracket Pre 2015
• 2 x M5 High Tensile Steel Nylocks
• 2 x M5 High Tensile Steel Hex Bolts

• Seat bolts are easily cross threaded.
• Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
• Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

Sticker up your car ready for your next event with our S&J or Boxer emblazoned sheet set!

The Original Fumoto Oil Drain Valve has been improving the way oil changes are performed since 1976. By replacing your oil drain plug with a Fumoto valve you can eliminate the mess and the need for tools in your oil change. Choosing Fumoto means no more messy oil spilled on your vehicle, clothes, and floor. Gone are the days of frozen drain plugs and stripped threads. All of a sudden drawing samples for oil analysis is as easy as one, two, three. It's time to upgrade your oil changes by choosing Fumoto. 

Features:

• The one-time drain plug replacement becomes your permanent oil changing solution
• Mess-free, tool-free oil changes that keep your hands, clothes, and floor clean.
• Money-saving DIY oil changes are now easier.
• The straight flow structure designed for quick oil draining.
• The valve is double-sealed from both ends to prevent leaks.
• Our original UP & TURN lever motions withstand any engine vibrations for no accidental openings.
• The lever clips provide additional security to the valves.
• All the valves are manufactured by our affiliated ISO-certified factory in Japan and leak-tested prior to being shipped.

 

Lever Clips for Precaution

When Fumoto valves are closed they are securely locked and will not open by themselves. Lever clips provide additional security to the valves and can only be attached when a lever is fully seated in the locked position. Installing a lever clip confirms that your valve is reliably locked and closed.

 

Broad Applications

Fumoto valves fit most engines and have been used in various applications. Cars, pickup trucks, buses, vans, commercial trucks, RVs, motorcycles, generators, boats, mowers, farm tractors, construction machines, industrial equipment, and many others. The valves are also not limited to oil drain ports but transmissions, air tanks and even to drain the coolant.

This Fire Extinguisher Bracket fits both Drivers Side and Passenger Side of the Toyota GT86 / Subaru BRZ / Scion FRS. Including Left Hand Drive and Right Hand Drive!

Made from 2mm Steel and Powder Coated Black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser-cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Every Purchase Includes:

• 1 x Toyota GT86/Subaru BRZ/Scion FRS Fire Extinguisher Bracket
• 2 x M5 High Tensile Steel Locknuts
• 2 x M5 High Tensile Steel Hex Bolts

How to Install:

1. Undo front seat bolts with an E Torx E10 or Socket that will fit.
2. Place the extinguisher cage on the bracket.
3. Lift the front of the seat and slip bracket under.
4. Reinstall bolts and tighten up each bolt.

Please Note:

• Seat bolts are easily cross-threaded.
• Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
• Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

Note: Does Not Include Fire Extinguisher

The Spill-Free Funnel eliminates trapped air pockets which usually cause erratic cooling system and heater performance. It controls the proper amount of coolant entering system and enables unattended filling of the cooling system. The funnel eliminates squeaky belts caused by coolant overflow and protect the environment. Five adapters fit most domestic and import cars. Straight extension and 45 degree elbows allow use on radiator caps that are placed at an angle or other hard-to-reach applications.

 

Fire Extinguisher Bracket designed for Subaru XV 

Including left hand drive and right hand drive!

Made from 2mm steel and powder coated black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Note: Does not include fire extinguisher in photo. 

Every Purchase Includes:

• 1 x Subaru XV Fire Extinguisher Bracket
• 2 x M5 High Tensile Steel Locknuts
• 2 x M5 High Tensile Steel Hex Bolts

Please Note:

• Seat bolts are easily cross threaded.
• Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
• Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

• 5 tonne fade resistant webbing 6 eye catching colours for easy visibility & personal styling. 
• Metal eyelet fitting on one end which simply bolts to the chassis rail etc. 
• No more bruised ankles from metal tow hooks!  
• Overal length 26cm   
•  Loop diameter 13cm 
• 13mm Mounting Hole.

The bracket fits both drivers side and passenger side, suitable for both left-hand and right-hand drive. For an extra measure of safety, you can install a bracket and have fire extinguishers on both sides of your car.

 

About Kap Industries

Every Purchase Includes:

• 1 x Subaru Bracket Pre 2015
• 2 x M5 High Tensile Steel Nylocks
• 2 x M5 High Tensile Steel Hex Bolts

• Seat bolts are easily cross threaded.
• Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
• Please be careful when installing. Kap Industries takes no responsibility for incorrect install.
• Fire Extinguisher not included

Fire Extinguisher Bracket designed for Subaru 2015 -2020 WRX and STI.

Also Suits:

-BR and BM Liberty/Outback

-SJ Forester.

 

Including left hand drive and right hand drive!

Made from 2mm steel and powder coated black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Note: Does not include fire extinguisher in photo. 

Every Purchase Includes:

• 1 x Subaru WRX/STI 2015-2019 Fire Extinguisher Bracket
• 2 x M5 High Tensile Steel Locknuts
• 2 x M5 High Tensile Steel Hex Bolts

Please Note:

• Seat bolts are easily cross threaded.
• Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
• Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

18mm x 20m

Features

• 3/8inch or 1/2inch square drive with hex size
• Ajustable 3 jaw Suits oil filters 60-125mm diameter

Features

• Suitable for oil, coolant, fuel and other liquids
• Includes 3 different sizes for a variety of jobs
• Large 190x170mm
• Medium 140x120mm
• Small 95x115mm

Features

• Suitable for oil, coolant, fuel and other liquids
• Wide opening for quick pouring
• Splash guard prevents mess
• 100mm Diameter
• 140mm Length

350mm Diameter, 28mm dish (Flat) wheel, yellow stripe on top for reference. Includes horn button.

Fits all MOMO, Sparco, SAAS, Lifeline Boss/Hub Kits.

Suede leather. Italian Made.

ECU Connect

ECU Connect is a free app for iPhone/iPad and Android devices that integrates with EcuTek's Bluetooth vehicle interface to offer you advanced features and functionality.

This exciting product allows tuners and customers to interact with the ECU using their mobile device. It also integrates with the latest EcuTek RaceROM features to provide innovative new functions and even greater control.

Standard features
These features are available for most vehicles via generic OBD2 support, but some do not apply to all models. 

Data logging – Display and record factory and RaceROM diagnostic parameters, including engine and transmission simultaneously*.
High speed – Logging rates up to 50% faster than ProECU and as fast as 200Hz on some vehicles.
RaceROM integration – Driver interaction with RaceROM features*.
Read & clear DTCs – Not only the engine ECU, but other modules too, such as for the TCM, ABS etc*.
Dashboards – Display real-time data from any parameter in a set of graphical displays using circular gauges, bar graphs or text.
Performance analyser – Test and share the performance results online.
Archive – Stores log files and performance test results for sharing with tuners or friends, directly from within the app.
ECU reset – Plus clearing of ECU learnt values*.
ECU info – Provides detailed information about the vehicle concerned.
Dealer locator – Lists all EcuTek Tuners and Master Tuners around the world starting with those closest to your location. Can be refined to show only those dealers who tune selected vehicles.

RaceROM Features
ECU Connect works with the latest RaceROM to integrate your device with new and existing features, including:

Custom data logging – Log numerous RaceROM live data parameters including fuel injection volume, per-cylinder knock, injector angle, G-sensors, wheel-slip ratio and more*.
Map switching – Switch between different modes using the app, and create and name each mode using ProECU*.
Valet mode – Reduce your car's power output for when someone else is to drive it*.
Launch control – Adjust the launch RPM using the app*.
Boost controller – Set the maximum allowed boost pressure for each map switch mode.

Custom Inputs
Five new inputs that can be configured and controlled using ECU Connect. Within ProECU these can be set up as a slider control, a numerical value or a switch, and provide the following possibilities:

Adjustable boost – Set min/max boost with a driver-adjustable slider control.
Adjustable traction control – Use a slider control for live variation of traction control gain.
Live adjustments – Use a slider or numerical control to add/remove ignition timing, adjust fuelling, vary cam timing, or alter custom map outputs.
Power output adjustment – Make live adjustments or engage solenoids or relays.
Valet mode – Turn this feature on or off using your mobile device.

^* Does not apply to all vehicles and models.

Essential Track Day Item!