Brake Discs

 Suits:

• 01+ WRX STI (4 Pot Brembo)   5x114.3 PCD Only

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

Disc Brakes Australia’s; (DBA) Club Spec T3 slotted rotors are DBA’s most advanced brake rotor on the market. Designed for extreme road and race applications, they are engineered for high performance and are targeted to the aggressive street driver as well as the dedicated track enthusiast.

The tri-symmetrical curve slots are CNC machined to dampen vibration harmonics for a quieter and more responsive pedal feel. With 48 precision machined slots, the number of out-gassing points for brake pad friction gasses greatly increases the consistency and effectiveness of each stop. Being a tri-symmetrical design also eliminates the need for left and right discs.

The T3 slotted rotor also comes with DBA’s innovative Kangaroo Paw ventilation system, consisting of 144 diamond and tear drop pillars between the two rotor faces. This system increases surface area by up to 59.7% and adds almost 10% greater mass, resulting in greater heat dissipation, minimising brake fade and prolonging the life of the pad and the rotor. The patented Kangaroo Paw system ensures your rotor is stronger, cooler and is designed to out-perform traditional straight-vane disc rotors by up to 20%.

However, if the temperatures do build up on the rotor, DBA’s trademarked XG150 High Carbon Alloyed Iron will assist in minimising warping and cracking, prolonging the service life of the rotor. The special formulation allows an increase in thermal capacity so that the rotor may handle constant extremes of heat over extended periods of time. Heat paint markings change colour at specific temperature thresholds, when temperature thresholds are exceeded paint markings will permanently change colour which offers the driver a clear indication of peak braking temperatures and allows the driver to monitor rotor fatigue and decide on rotor replacement.

Specifications:
Diameter  290 mm
Height 67.5 mm 
Thickness 10 mm 
Min Thickness 8.5 mm
Inner Diameter 58 mm

Suits:

• 01-09 Liberty
• 99-02 Outback

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

 Generic image used, actual product may vary

Disc Brakes Australia’s; (DBA) Club Spec T3 slotted rotors are DBA’s most advanced brake rotor on the market. Designed for extreme road and race applications, they are engineered for high performance and are targeted to the aggressive street driver as well as the dedicated track enthusiast.

The tri-symmetrical curve slots are CNC machined to dampen vibration harmonics for a quieter and more responsive pedal feel. With 48 precision machined slots, the number of out-gassing points for brake pad friction gasses greatly increases the consistency and effectiveness of each stop. Being a tri-symmetrical design also eliminates the need for left and right discs.

The T3 slotted rotor also comes with DBA’s innovative Kangaroo Paw ventilation system, consisting of 144 diamond and tear drop pillars between the two rotor faces. This system increases surface area by up to 59.7% and adds almost 10% greater mass, resulting in greater heat dissipation, minimising brake fade and prolonging the life of the pad and the rotor. The patented Kangaroo Paw system ensures your rotor is stronger, cooler and is designed to out-perform traditional straight-vane disc rotors by up to 20%.

However, if the temperatures do build up on the rotor, DBA’s trademarked XG150 High Carbon Alloyed Iron will assist in minimising warping and cracking, prolonging the service life of the rotor. The special formulation allows an increase in thermal capacity so that the rotor may handle constant extremes of heat over extended periods of time. Heat paint markings change colour at specific temperature thresholds, when temperature thresholds are exceeded paint markings will permanently change colour which offers the driver a clear indication of peak braking temperatures and allows the driver to monitor rotor fatigue and decide on rotor replacement.

Specifications:

• Diameter  290 mm
• Height 67.5 mm 
• Thickness 18 mm 
• Min Thickness 16 mm
• Inner Diameter 58 mm

Suits:

• 98-07 Impreza WRX 

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

 Generic image used, actual product may vary 

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

T2 is denoted by the suffix (S) in Street Series part numbers.

Specifications:

• Diameter  316 mm
• Height 56.7 mm 
• Thickness 30 mm 
• Min Thickness 28 mm
• Inner Diameter 58 mm

Disc Brakes Australia’s; (DBA) Club Spec T3 slotted rotors are DBA’s most advanced brake rotor on the market. Designed for extreme road and race applications, they are engineered for high performance and are targeted to the aggressive street driver as well as the dedicated track enthusiast.

The tri-symmetrical curve slots are CNC machined to dampen vibration harmonics for a quieter and more responsive pedal feel. With 48 precision machined slots, the number of out-gassing points for brake pad friction gasses greatly increases the consistency and effectiveness of each stop. Being a tri-symmetrical design also eliminates the need for left and right discs.

The T3 slotted rotor also comes with DBA’s innovative Kangaroo Paw ventilation system, consisting of 144 diamond and tear drop pillars between the two rotor faces. This system increases surface area by up to 59.7% and adds almost 10% greater mass, resulting in greater heat dissipation, minimising brake fade and prolonging the life of the pad and the rotor. The patented Kangaroo Paw system ensures your rotor is stronger, cooler and is designed to out-perform traditional straight-vane disc rotors by up to 20%.

However, if the temperatures do build up on the rotor, DBA’s trademarked XG150 High Carbon Alloyed Iron will assist in minimising warping and cracking, prolonging the service life of the rotor. The special formulation allows an increase in thermal capacity so that the rotor may handle constant extremes of heat over extended periods of time. Heat paint markings change colour at specific temperature thresholds, when temperature thresholds are exceeded paint markings will permanently change colour which offers the driver a clear indication of peak braking temperatures and allows the driver to monitor rotor fatigue and decide on rotor replacement.

Specifications:

• Diameter  326 mm
• Height 63.5 mm 
• Thickness 20 mm 
• Min Thickness 18 mm
• Inner Diameter 58 mm
• Number of Holes 10

• 18+ Spec R STI (6 Pot Brembo Calipers)

Disc Brakes Australia’s; (DBA) Club Spec T3 slotted rotors are DBA’s most advanced brake rotor on the market. Designed for extreme road and race applications, they are engineered for high performance and are targeted to the aggressive street driver as well as the dedicated track enthusiast.

The tri-symmetrical curve slots are CNC machined to dampen vibration harmonics for a quieter and more responsive pedal feel. With 48 precision machined slots, the number of out-gassing points for brake pad friction gasses greatly increases the consistency and effectiveness of each stop. Being a tri-symmetrical design also eliminates the need for left and right discs.

The T3 slotted rotor also comes with DBA’s innovative Kangaroo Paw ventilation system, consisting of 144 diamond and tear drop pillars between the two rotor faces. This system increases surface area by up to 59.7% and adds almost 10% greater mass, resulting in greater heat dissipation, minimising brake fade and prolonging the life of the pad and the rotor. The patented Kangaroo Paw system ensures your rotor is stronger, cooler and is designed to out-perform traditional straight-vane disc rotors by up to 20%.

However, if the temperatures do build up on the rotor, DBA’s trademarked XG150 High Carbon Alloyed Iron will assist in minimising warping and cracking, prolonging the service life of the rotor. The special formulation allows an increase in thermal capacity so that the rotor may handle constant extremes of heat over extended periods of time. Heat paint markings change colour at specific temperature thresholds, when temperature thresholds are exceeded paint markings will permanently change colour which offers the driver a clear indication of peak braking temperatures and allows the driver to monitor rotor fatigue and decide on rotor replacement.

Specifications:

• Diameter  340 mm
• Height 53 mm 
• Thickness 30 mm 
• Min Thickness 28 mm
• Inner Diameter 58 mm
• Number of Holes 10

Suits:

• 18+ Spec R STI (6 Piston Brembo Caliper)

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

Disc Brakes Australia’s; (DBA) Club Spec T3 slotted rotors are DBA’s most advanced brake rotor on the market. Designed for extreme road and race applications, they are engineered for high performance and are targeted to the aggressive street driver as well as the dedicated track enthusiast.

The tri-symmetrical curve slots are CNC machined to dampen vibration harmonics for a quieter and more responsive pedal feel. With 48 precision machined slots, the number of out-gassing points for brake pad friction gasses greatly increases the consistency and effectiveness of each stop. Being a tri-symmetrical design also eliminates the need for left and right discs.

The T3 slotted rotor also comes with DBA’s innovative Kangaroo Paw ventilation system, consisting of 144 diamond and tear drop pillars between the two rotor faces. This system increases surface area by up to 59.7% and adds almost 10% greater mass, resulting in greater heat dissipation, minimising brake fade and prolonging the life of the pad and the rotor. The patented Kangaroo Paw system ensures your rotor is stronger, cooler and is designed to out-perform traditional straight-vane disc rotors by up to 20%.

However, if the temperatures do build up on the rotor, DBA’s trademarked XG150 High Carbon Alloyed Iron will assist in minimising warping and cracking, prolonging the service life of the rotor. The special formulation allows an increase in thermal capacity so that the rotor may handle constant extremes of heat over extended periods of time. Heat paint markings change colour at specific temperature thresholds, when temperature thresholds are exceeded paint markings will permanently change colour which offers the driver a clear indication of peak braking temperatures and allows the driver to monitor rotor fatigue and decide on rotor replacement.

Specifications:

• Diameter  316 mm
• Height 63.5 mm 
• Thickness 20 mm 
• Min Thickness 18 mm
• Inner Diameter 58 mm
• Number of Holes 10

Suits:

• 08-18 STI

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

Disc Brakes Australia’s; (DBA) Club Spec T3 slotted rotors are DBA’s most advanced brake rotor on the market. Designed for extreme road and race applications, they are engineered for high performance and are targeted to the aggressive street driver as well as the dedicated track enthusiast.

The tri-symmetrical curve slots are CNC machined to dampen vibration harmonics for a quieter and more responsive pedal feel. With 48 precision machined slots, the number of out-gassing points for brake pad friction gasses greatly increases the consistency and effectiveness of each stop. Being a tri-symmetrical design also eliminates the need for left and right discs.

The T3 slotted rotor also comes with DBA’s innovative Kangaroo Paw ventilation system, consisting of 144 diamond and tear drop pillars between the two rotor faces. This system increases surface area by up to 59.7% and adds almost 10% greater mass, resulting in greater heat dissipation, minimising brake fade and prolonging the life of the pad and the rotor. The patented Kangaroo Paw system ensures your rotor is stronger, cooler and is designed to out-perform traditional straight-vane disc rotors by up to 20%.

However, if the temperatures do build up on the rotor, DBA’s trademarked XG150 High Carbon Alloyed Iron will assist in minimising warping and cracking, prolonging the service life of the rotor. The special formulation allows an increase in thermal capacity so that the rotor may handle constant extremes of heat over extended periods of time. Heat paint markings change colour at specific temperature thresholds, when temperature thresholds are exceeded paint markings will permanently change colour which offers the driver a clear indication of peak braking temperatures and allows the driver to monitor rotor fatigue and decide on rotor replacement.

Specifications:

• Diameter  316 mm
• Height 56.7 mm 
• Thickness 30 mm 
• Min Thickness 28 mm
• Inner Diameter 58 mm
• Number of Holes 10

Suits:

• 15-18 Impreza WRX 
• 14-18 Forester 
• 04-09 Liberty 
• 15-18 Outback  

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

T2 is denoted by the suffix (S) in Street Series part numbers.

Specifications:

• Diameter  286 mm
• Height 63.5 mm 
• Thickness 10 mm 
• Min Thickness 8.5 mm
• Inner Diameter 58 mm
• Number of Holes 10

Suits:

• 08-18 Impreza WRX 
• 09-13 Forester 
• 09-14 Liberty 
• 12-18 BRZ/86 ZC6 

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

T2 is denoted by the suffix (S) in Street Series part numbers.

Specifications:

• Diameter  316 mm
• Height 67.5 mm 
• Thickness 20 mm 
• Min Thickness 18 mm
• Inner Diameter 58 mm
• Number of Holes 5

Suits:

• 01-07 WRX (with Brembo caliper upgrade)

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

We recommend the T2 slot design for more intensive braking applications.

T2 is denoted by the suffix (S) in Street Series part numbers.

 Specifications:

• Diameter  316 mm
• Height 63.5 mm 
• Thickness 20 mm 
• Min Thickness 18 mm
• Inner Diameter 58 mm
• Number of Holes 10

Suits:

• 08-18 STI

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, these discs are directional, please select both left & right

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

T2 is denoted by the suffix (S) in Street Series part numbers.

Specifications:

• Diameter  290 mm
• Height 67.5 mm 
• Thickness 10 mm 
• Min Thickness 8.5 mm
• Inner Diameter 58 mm
• Number of Holes 5

• 01-09 Liberty
• 99-02 Outback

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

T2 is denoted by the suffix (S) in Street Series part numbers.

Specifications:

• Diameter  266 mm
• Height 67.5 mm 
• Thickness 10 mm 
• Min Thickness 8.5 mm
• Inner Diameter 58 mm
• Number of Holes 5

Suits:

• 93-07 Impreza WRX
• 89-99 Liberty 
• 97-08 Forester (Non Turbo)

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

T2 is denoted by the suffix (S) in Street Series part numbers.

Specifications:

• Diameter  260 mm
• Height 57 mm 
• Thickness 24 mm 
• Min Thickness 22 mm
• Inner Diameter 58 mm
• Number of Holes 5

Suits:

• 93-05 Impreza
• 89-03 Liberty

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

Disc Brakes Australia’s; (DBA) Club Spec T3 slotted rotors are DBA’s most advanced brake rotor on the market. Designed for extreme road and race applications, they are engineered for high performance and are targeted to the aggressive street driver as well as the dedicated track enthusiast.

The tri-symmetrical curve slots are CNC machined to dampen vibration harmonics for a quieter and more responsive pedal feel. With 48 precision machined slots, the number of out-gassing points for brake pad friction gasses greatly increases the consistency and effectiveness of each stop. Being a tri-symmetrical design also eliminates the need for left and right discs.

The T3 slotted rotor also comes with DBA’s innovative Kangaroo Paw ventilation system, consisting of 144 diamond and tear drop pillars between the two rotor faces. This system increases surface area by up to 59.7% and adds almost 10% greater mass, resulting in greater heat dissipation, minimising brake fade and prolonging the life of the pad and the rotor. The patented Kangaroo Paw system ensures your rotor is stronger, cooler and is designed to out-perform traditional straight-vane disc rotors by up to 20%.

However, if the temperatures do build up on the rotor, DBA’s trademarked XG150 High Carbon Alloyed Iron will assist in minimising warping and cracking, prolonging the service life of the rotor. The special formulation allows an increase in thermal capacity so that the rotor may handle constant extremes of heat over extended periods of time. Heat paint markings change colour at specific temperature thresholds, when temperature thresholds are exceeded paint markings will permanently change colour which offers the driver a clear indication of peak braking temperatures and allows the driver to monitor rotor fatigue and decide on rotor replacement.

Specifications:

• Diameter  316 mm
• Height 67.5 mm 
• Thickness 20 mm 
• Min Thickness 18 mm
• Inner Diameter 58 mm
• Number of Holes 10

Suits:

• 02-07 STI (2 Pot Brembo)
• 06-09 Liberty GT (2 Pot Brembo)

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

T2 is denoted by the suffix (S) in Street Series part numbers.

Specifications:

• Diameter  316 mm
• Height 67.5 mm 
• Thickness 20 mm 
• Min Thickness 18 mm
• Inner Diameter 58 mm
• Number of Holes 10
• Pitch Circle Ø 100 mm

Suits:

• 02-07 WRX/STI (2 Pot Brembo)
• 06-09 Liberty GT (2 Pot Brembo)

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

Disc Brakes Australia’s; (DBA) Club Spec T3 slotted rotors are DBA’s most advanced brake rotor on the market. Designed for extreme road and race applications, they are engineered for high performance and are targeted to the aggressive street driver as well as the dedicated track enthusiast.

The tri-symmetrical curve slots are CNC machined to dampen vibration harmonics for a quieter and more responsive pedal feel. With 48 precision machined slots, the number of out-gassing points for brake pad friction gasses greatly increases the consistency and effectiveness of each stop. Being a tri-symmetrical design also eliminates the need for left and right discs.

The T3 slotted rotor also comes with DBA’s innovative Kangaroo Paw ventilation system, consisting of 144 diamond and tear drop pillars between the two rotor faces. This system increases surface area by up to 59.7% and adds almost 10% greater mass, resulting in greater heat dissipation, minimising brake fade and prolonging the life of the pad and the rotor. The patented Kangaroo Paw system ensures your rotor is stronger, cooler and is designed to out-perform traditional straight-vane disc rotors by up to 20%.

However, if the temperatures do build up on the rotor, DBA’s trademarked XG150 High Carbon Alloyed Iron will assist in minimising warping and cracking, prolonging the service life of the rotor. The special formulation allows an increase in thermal capacity so that the rotor may handle constant extremes of heat over extended periods of time. Heat paint markings change colour at specific temperature thresholds, when temperature thresholds are exceeded paint markings will permanently change colour which offers the driver a clear indication of peak braking temperatures and allows the driver to monitor rotor fatigue and decide on rotor replacement.

Specifications:

• Diameter 326 mm
• Height 53 mm 
• Thickness 30 mm 
• Min Thickness 28 mm
• Inner Diameter 58 mm
• Number of Holes 10

 Suits:

• 01+ WRX STI (4 Pot Brembo)
• 06-09 Liberty (4 Pot Brembo)

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

T2 is denoted by the suffix (S) in Street Series part numbers.

SPECIFICATIONS
Diameter  326 mm
Height 53 mm 
Thickness 30 mm 
Min Thickness 28 mm
Inner Diameter 58 mm
Number of Holes 10
Pitch Circle Ø 100 mm

Suits:

01+  WRX STI (4 Pot Brembo)
06-09 Liberty GT STI (4 Pot Brembo)

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

Disc Brakes Australia’s; (DBA) Club Spec T3 slotted rotors are DBA’s most advanced brake rotor on the market. Designed for extreme road and race applications, they are engineered for high performance and are targeted to the aggressive street driver as well as the dedicated track enthusiast.

The tri-symmetrical curve slots are CNC machined to dampen vibration harmonics for a quieter and more responsive pedal feel. With 48 precision machined slots, the number of out-gassing points for brake pad friction gasses greatly increases the consistency and effectiveness of each stop. Being a tri-symmetrical design also eliminates the need for left and right discs.

The T3 slotted rotor also comes with DBA’s innovative Kangaroo Paw ventilation system, consisting of 144 diamond and tear drop pillars between the two rotor faces. This system increases surface area by up to 59.7% and adds almost 10% greater mass, resulting in greater heat dissipation, minimising brake fade and prolonging the life of the pad and the rotor. The patented Kangaroo Paw system ensures your rotor is stronger, cooler and is designed to out-perform traditional straight-vane disc rotors by up to 20%.

However, if the temperatures do build up on the rotor, DBA’s trademarked XG150 High Carbon Alloyed Iron will assist in minimising warping and cracking, prolonging the service life of the rotor. The special formulation allows an increase in thermal capacity so that the rotor may handle constant extremes of heat over extended periods of time. Heat paint markings change colour at specific temperature thresholds, when temperature thresholds are exceeded paint markings will permanently change colour which offers the driver a clear indication of peak braking temperatures and allows the driver to monitor rotor fatigue and decide on rotor replacement.

Specifications:

• Diameter 266 mm
• Height 67.5 mm 
• Thickness 18 mm 
• Min Thickness 16 mm
• Inner Diameter 58 mm
• Number of Holes 5

 Suits:

• 96-00 Impreza WRX/STI
• 91-98 Liberty 

Please measure factory discs and compare with the specifications above to confirm fitment.

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

T2 is denoted by the suffix (S) in Street Series part numbers.

Specifications:

• Diameter  266 mm
• Height 67.5 mm 
• Thickness 18 mm 
• Min Thickness 16 mm
• Inner Diameter 58 mm
• Number of Holes 5
• Pitch Circle Ø 100 mm

Suits:

• 96-00 Impreza WRX 
•  91-98 Liberty

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

Disc Brakes Australia’s; (DBA) Club Spec T3 slotted rotors are DBA’s most advanced brake rotor on the market. Designed for extreme road and race applications, they are engineered for high performance and are targeted to the aggressive street driver as well as the dedicated track enthusiast.
The tri-symmetrical curve slots are CNC machined to dampen vibration harmonics for a quieter and more responsive pedal feel. With 48 precision machined slots, the number of out-gassing points for brake pad friction gasses greatly increases the consistency and effectiveness of each stop. Being a tri-symmetrical design also eliminates the need for left and right discs.
The T3 slotted rotor also comes with DBA’s innovative Kangaroo Paw ventilation system, consisting of 144 diamond and tear drop pillars between the two rotor faces. This system increases surface area by up to 59.7% and adds almost 10% greater mass, resulting in greater heat dissipation, minimising brake fade and prolonging the life of the pad and the rotor. The patented Kangaroo Paw system ensures your rotor is stronger, cooler and is designed to out-perform traditional straight-vane disc rotors by up to 20%.
However, if the temperatures do build up on the rotor, DBA’s trademarked XG150 High Carbon Alloyed Iron will assist in minimising warping and cracking, prolonging the service life of the rotor. The special formulation allows an increase in thermal capacity so that the rotor may handle constant extremes of heat over extended periods of time. Heat paint markings change colour at specific temperature thresholds, when temperature thresholds are exceeded paint markings will permanently change colour which offers the driver a clear indication of peak braking temperatures and allows the driver to monitor rotor fatigue and decide on rotor replacement.

Specifications:

• Disc Vent V
• Diameter [MM] 277
• Height [MM] 57
• Thickness [MM] 24
• Min Thickness [MM] 22
• Inner Diameter [MM] 58
• Number Of Holes 5

Suits:

• 94-05 Impreza WRX
• 97-02 Forester GT 
• 12-18 BRZ/86
  

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

T2 is denoted by the suffix (S) in Street Series part numbers.

Specifications:

• Diameter  277 mm
• Height 57 mm 
• Thickness 24 mm 
• Min Thickness 22 mm
• Inner Diameter 58 mm
• Number of Holes 5
• Pitch Circle Ø 100 mm

• 94-05 Impreza WRX
• 97-02 Forester GT
• 12-18 BRZ/86 

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle

Disc Brakes Australia’s; (DBA) Club Spec T3 slotted rotors are DBA’s most advanced brake rotor on the market. Designed for extreme road and race applications, they are engineered for high performance and are targeted to the aggressive street driver as well as the dedicated track enthusiast.

The tri-symmetrical curve slots are CNC machined to dampen vibration harmonics for a quieter and more responsive pedal feel. With 48 precision machined slots, the number of out-gassing points for brake pad friction gasses greatly increases the consistency and effectiveness of each stop. Being a tri-symmetrical design also eliminates the need for left and right discs.

The T3 slotted rotor also comes with DBA’s innovative Kangaroo Paw ventilation system, consisting of 144 diamond and tear drop pillars between the two rotor faces. This system increases surface area by up to 59.7% and adds almost 10% greater mass, resulting in greater heat dissipation, minimising brake fade and prolonging the life of the pad and the rotor. The patented Kangaroo Paw system ensures your rotor is stronger, cooler and is designed to out-perform traditional straight-vane disc rotors by up to 20%.

However, if the temperatures do build up on the rotor, DBA’s trademarked XG150 High Carbon Alloyed Iron will assist in minimising warping and cracking, prolonging the service life of the rotor. The special formulation allows an increase in thermal capacity so that the rotor may handle constant extremes of heat over extended periods of time. Heat paint markings change colour at specific temperature thresholds, when temperature thresholds are exceeded paint markings will permanently change colour which offers the driver a clear indication of peak braking temperatures and allows the driver to monitor rotor fatigue and decide on rotor replacement.

Please measure factory discs and compare with the specifications above to confirm fitment.

Price is per disc, 2 required per vehicle