*If Unsure Please Confirm With VIN Number*

• Thread M14x1.25
• Reach 19
• Hex Size 16
• Resisted Yes
• Gap .7mm

• Fine Iridium tipped centre electrode provides stable idle, improved fuel efficiency and lower emissions
• Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
• Corrugated ribs reduce the risk of flashover
• Pure alumina silicate ceramic insulator, provides superior strength and better heat transfer
• Triple seals prevent leakage
• Copper core aids in heat removal

The Spill-Free Funnel eliminates trapped air pockets which usually cause erratic cooling system and heater performance. It controls the proper amount of coolant entering system and enables unattended filling of the cooling system. The funnel eliminates squeaky belts caused by coolant overflow and protect the environment. Five adapters fit most domestic and import cars. Straight extension and 45 degree elbows allow use on radiator caps that are placed at an angle or other hard-to-reach applications.

Features

• Suitable for oil, coolant, fuel and other liquids
• Includes 3 different sizes for a variety of jobs
• Large 190x170mm
• Medium 140x120mm
• Small 95x115mm

Features

• Suitable for oil, coolant, fuel and other liquids
• Wide opening for quick pouring
• Splash guard prevents mess
• 100mm Diameter
• 140mm Length

Permatex Ultra Black Maximum Oil Resistance Gasket Maker 

• Fast-curing formula
• Sensor-safe, low odour, non-corrosive
• Meets performance specs of OE silicone gaskets
• Retains high flexibility, oil resistant properties through use of a patented adhesion system
• Temperature range -54 degrees C to 260 degrees C intermittent

Permatex Ultra Grey High Torque RTV Silicone Gasket Maker 99G

• 01-07 Impreza WRX STI 

*If Unsure Please Confirm With VIN Number*

• 08-16 Impreza WRX & STI
• 15-20 WRX
• 15-20 WRX STI
• 15-20 Levorg
• 12-16 XV
• 09-18 Forester

*If Unsure Please Confirm With VIN Number*

• 03-07 Forester
  

*If Unsure Please Confirm With VIN Number*

• BRZ/86
  

*If Unsure Please Confirm With VIN Number*

Features

• 3/8inch or 1/2inch square drive with hex size
• Ajustable 3 jaw Suits oil filters 60-125mm diameter

Wynn's Engine Oil Flush optimises your new oil and filter during servicing. Whether your vehicle is Petrol, Diesel, Hybrid or LPG powered, simply add Wynn’s Engine Oil Flush to your engine oil and let it dissolve varnish, sludge and contaminants from vital engine parts preparing it for an optimal oil change. With its easy to use one shot
treatment and backed by European Technology, Wynn’s Engine Oil Flush treats up to 8L of oil, keeping your new motor oil and filter cleaner for longer.

ADVANTAGES: Wynn's Engine Oil Flush cleans the engine prior to oil change, removing gums and varnish to ensure any new oil is not contaminated. With its solvent free formulation, Wynn’s Engine Oil Flush can be left for up to 24 hours in particularly dirty systems, without damaging seals.

BENEFITS: Wynn's Engine Oil Flush has been developed to provide the following benefits:

• Prepares engine for motor oil and filter change
• Removes contaminants from vital engine parts
• Keeps new motor oil and filter cleaner for longer
• Solvent free safe on seals
• Easy-to-use one-shot treatment
• Can be left in for up to 24 hrs
• Treats up to 8 Litres of oil

APPLICATIONS: Wynn's Engine Oil Flush is recommended for both new and old Petrol, Diesel, Hybrid or LPG engines.

DIRECTIONS FOR USE:

1. With engine off, add entire contents of Wynn’s Engine Oil Flush to engine oil
2. Run engine at idle speed for 15 minutes minimum
3. For particularly dirty systems Wynn’s Engine Oil Flush can be left up to 24 hours in the system. Note: vehicle should not be driven long distances at high engine speeds or have excessive loads (i.e. towing) applied to it during this period.
4. With engine turned off, drain old oil while engine is still hot
5. Install new oil filter and add new oil
6. Use Wynn's Engine Oil Flush with each oil change to prevent deposit built up