RCM Cylinder 4 Cooling Mod Gloss Black

$199.95

Tax included. Shipping calculated at checkout.

Cylinder 4 cooling has long been a known issue on the EJ Family of Subaru engines. The nature of the water passageways around this area means a lack of cooling can lead to an increase in the temperatures around this cylinder.

RCM's simple solution to this problem lies in our easy to fit complete kit. Billet fittings are banded in place on our custom 90 degree Samco silicon hose, which you simply fit into the unused port at the back of the block at cylinder 4's location. This is then tee'd into the water matrix pipe directly above using the supplied HiGrip stainless steel fittings. The billet barb fitting is of the correct diameter to allow the right flow rate around cylinder 4 to cool without over cooling, and the 90 degree pre-formed Samco hose ensures that this flow is maintained without disturbance from potential kinks in the pipework.

Suits all EJ Engines

HKS Billet Oil Filler Cap

$99.95

Tax included. Shipping calculated at checkout.

New aluminum filler cap cover to brighten up the engine bay!

Kap Industries Fire Extinguisher Bracket MY97-2014 WRX & STI

Kap Industries Fire Extinguisher Bracket MY97-2014 WRX & STI

$115.95

Tax included. Shipping calculated at checkout.

Kap Industries Fire Extinguisher Bracket MY97-2014 WRX & STI

The bracket fits both drivers side and passenger side, suitable for both left-hand and right-hand drive. For an extra measure of safety, you can install a bracket and have fire extinguishers on both sides of your car.

About Kap Industries

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Every Purchase Includes:

1 x Subaru Bracket Pre 2015
2 x M5 High Tensile Steel Nylocks
2 x M5 High Tensile Steel Hex Bolts

Please Note:

Seat bolts are easily cross threaded.
Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

K&N HP1008 Oil Filter

$23.95

Tax included. Shipping calculated at checkout.

• Heavy duty canister design
• Double rolled seal for superior sealing
• 1 inch nut cast into body for easy tightening or removal
• Predrilled lock wire hole for performance applications
• Compatible with all Blended, Synthetic and Conventional Motor Oils
• Designed to meet or exceed OEM requirements
• Backed by a 1 year limited warranty

Part# HP1008/Z436ST
Height Overall 65.00 mm
Seal Diameter 63.00 mm
Seam Diameter 69.50 mm
Thread MX20 x 1.5

K&N PS1008 Oil Filter

$14.95

Tax included. Shipping calculated at checkout.

• Heavy duty canister design
• Double rolled seal for superior sealing
• 1 inch nut cast into body for easy tightening or removal
• Predrilled lock wire hole for performance applications
• Compatible with all Blended, Synthetic and Conventional Motor Oils
• Designed to meet or exceed OEM requirements
• Backed by a 1 year limited warranty

Part# PS1008/Z436ST
Height Overall 65.00 mm
Seal Diameter 63.00 mm
Seam Diameter 69.50 mm
Thread MX20 x 1.5

Fumoto Oil Drain Plug Quick Change Valve M20 x 1.5

Fumoto Oil Drain Plug Quick Change Valve M20 x 1.5

$46.00

Tax included. Shipping calculated at checkout.

The Original Fumoto Oil Drain Valve has been improving the way oil changes are performed since 1976. By replacing your oil drain plug with a Fumoto valve you can eliminate the mess and the need for tools in your oil change. Choosing Fumoto means no more messy oil spilled on your vehicle, clothes, and floor. Gone are the days of frozen drain plugs and stripped threads. All of a sudden drawing samples for oil analysis is as easy as one, two, three. It's time to upgrade your oil changes by choosing Fumoto.

Features:

The one-time drain plug replacement becomes your permanent oil changing solution
Mess-free, tool-free oil changes that keep your hands, clothes, and floor clean.
Money-saving DIY oil changes are now easier.
The straight flow structure designed for quick oil draining.
The valve is double-sealed from both ends to prevent leaks.
Our original UP & TURN lever motions withstand any engine vibrations for no accidental openings.
The lever clips provide additional security to the valves.
All the valves are manufactured by our affiliated ISO-certified factory in Japan and leak-tested prior to being shipped.

Lever Clips for Precaution

When Fumoto valves are closed they are securely locked and will not open by themselves. Lever clips provide additional security to the valves and can only be attached when a lever is fully seated in the locked position. Installing a lever clip confirms that your valve is reliably locked and closed.

Broad Applications

Fumoto valves fit most engines and have been used in various applications. Cars, pickup trucks, buses, vans, commercial trucks, RVs, motorcycles, generators, boats, mowers, farm tractors, construction machines, industrial equipment, and many others. The valves are also not limited to oil drain ports but transmissions, air tanks and even to drain the coolant.

Goodridge Clutch Line WRX/STI/FXT/LGT

$69.95

Tax included. Shipping calculated at checkout.

GoodRidge Stainless Steel Clutch Line. This is an excellent OEM replacement that helps promote a quicker response from the pedal to the clutch for improved performance.

Here are the details:

PTFE inner hose covered by braided stainless steel
External Teflon coating
Won't expand under pressure
Delivers immediate pressure from the brake pedal to the clutch slave cylinder for a faster response
Comes with a new banjo bolt, copper o-rings, and c-clip

Iriway 7

$63.95

Tax included. Shipping calculated at checkout.

Iriway 7

Thread M14x1.25
Reach 19
Hex Size 16
Resisted Yes
Gap .7mm

Fine Iridium tipped centre electrode provides stable idle, improved fuel efficiency and lower emissions
Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
Corrugated ribs reduce the risk of flashover
Pure alumina silicate ceramic insulator, provides superior strength and better heat transfer
Triple seals prevent leakage
Copper core aids in heat removal

Price is per plug

Iriway LFR7AIX

$39.95

Tax included. Shipping calculated at checkout.

Iriway LFR7AIX

Thread M14 x 1.25
Reach 26.5
Hex Size 16
Resisted Yes
Gap .8mm

Price is per plug

MAC 3 Port Boost Solenoid Universal

$121.00

Tax included. Shipping calculated at checkout.

MAC 35 series are the go-to solenoid valve for automotive boost control due to their exceptionally rugged and reliable design. Features waterproof female connector, 1/8″ BSP threads, and includes two 7mm hose tails.

Tuning Notes:

Because this upgraded solenoid affects the way that your vehicle controls boost, it is always recommended that you consult with a tuner immediately following installation. It is not recommended that you drive the car in a way that builds boost without doing so. If you have any questions, don't hesitate to get in touch with us directly!

Suits:

All Turbo Subaru Models

Whiteline KCA313 Front Roll Centre/Bump Steer Correction Kit

Whiteline KCA313 Front Roll Centre/Bump Steer Correction Kit

$272.00

Tax included. Shipping calculated at checkout.

A must for lowered vehicles, Whiteline roll centre and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.

Notes:
Reduces Roll/Bump Steer

Kits Required: 1

Warranty: 3 Year / 60,000Kms

Kit Contents:

2 Ball Joints
2 Tie Rods
Install Guide

Suits:

Subaru 97 On Forester
Subaru 93-16 Impreza
Subaru 93 On Impreza WRX
Subaru 93 On Impreza WRX STI
Subaru 15 On Levorg
Subaru 94 On Liberty
Subaru 98 On Outback

Genuine Subaru AC Idler Bracket Adjuster #73134AC001

$26.95

Tax included. Shipping calculated at checkout.

Genuine Subaru AC Idler Bracket Adjuster #73134AC001

*If Unsure Please Confirm With VIN Number*

Bendix General DB1379GCT Rear Brake Pads 96-00 WRX 97-02 Forester GT 99-09 Liberty GT

Bendix General DB1379GCT Rear Brake Pads 96-00 WRX 97-02 Forester GT 99-09 Liberty GT

$79.95

Tax included. Shipping calculated at checkout.

• Ceramic Stealth Advanced Technology for whisper quiet braking, silky smooth operation, noticeably less dust.
• Noise Absorbing Shims for reduced transmission of vibration and noise from the brake pad during extreme braking.

Suits:

96-00 WRX GC8 (1-Piston)**
97-02 Forester GT SF (1-Piston)
99-03 Liberty GT BE (1-Piston)
04-09 Liberty GT BL/BP (1-Piston)

**96-00 WRX has two possible shapes for rear 1-Piston Pad: DB1379 and DB1186. Check pad shapes to confirm correct pad for your model

Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

Bendix General DB1672GCT Rear Brake Pads 00-07 Impreza 03-08 Forester 03-09 Liberty

Bendix General DB1672GCT Rear Brake Pads 00-07 Impreza 03-08 Forester 03-09 Liberty

$79.95

Tax included. Shipping calculated at checkout.

• Ceramic Stealth Advanced Technology for whisper quiet braking, silky smooth operation, noticeably less dust.
• Noise Absorbing Shims for reduced transmission of vibration and noise from the brake pad during extreme braking.

Suits:

00-07 Impreza
03-08 Forester
03-09 Liberty

Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

Roger Clark Motorsports High Performance Race Oil Filter

$34.95

Tax included. Shipping calculated at checkout.

Whilst on the face of it many of us have to admit that simple products such as an oil filter don’t set our pulses racing but it is at this point where we need to step back and realise the true importance of this relatively simple component.

Your engine cannot survive without its lifeblood, the oil. The oil as we know lubricates, protects and coats all of the precious engine components ensuring they operate smoothly and at the correct temperature. With a poor quality oil, low oil level, or worse, no oil at all, the internal components of the engine would reach a temperature where they would no longer operate as intended and ultimately fail (sometimes in a catastrophic manor). Other circumstances of failure relating to engine oil can be found when small particles of debris or swarf are allowed to flow freely through your engine. These particles of dirt, debris or swarf can prematurely wear out and damage numerous engine components which in turn will ultimately lead to engine failure. Contamination of the oil can come from general engine wear and tear, as well as an excess build-up of carbon deposits.

Keeping the above in mind we can move onto the oil filter, the single component solely responsible for ensuring that the engine oil is kept in a clean and useable condition. Although such a basic component its job is vital when maintaining reliability for mechanical components. Should the filter not do its job efficiently then ultimately your engine is at risk.

Over the years there has been various manufacturers producing oil filters suitable for the Subaru Impreza, some have been very successful whilst others very poor but here at RCM we decided to take every ounce of knowledge we have gained over the last twenty two years and design a filter solely for use with high performance Subaru engines.

Height Overall 65.00 mm
Seal Diameter 63.00 mm
Seam Diameter 69.50 mm
Thread MX20 x 1.5