Name: Bosch Motorsport BR540 Fuel Pump
Brand: Boxer Performance Parts
SKU: BPP540L
Price: 299.0 AUD
Availability: InStock

Bosch Motorsport BR540 Fuel Pump

$299.00

Tax included. Shipping calculated at checkout.

Extreme High-Output Ethanol Friendly Fuel Pump

A true ethanol and petroleum friendly fuel pump with flow/pressure capabilities to deliver fuel for up to 350kw at the wheels.

Note: Modifications to the factory fuel pump carrier bracket or module are required.

Our Extreme High-Output Fuel Pumps do not have a check valve, therefore slightly longer ‘cranking’ periods are experience before the engine ‘fires-up’, this is a positive side-effect for engine longevity.

You can also choose to add a one way check valve if you prefer:

Raceworks One Way Check Valve

Note: In place of the BR540 on its own we recommend a Boxer Performance Parts 700HP Subaru Fuel Pump Module for MY08-MY14 WRX, MY08-MY20 STI, MY08-MY13 XT Forester, MY04-MY10 GT Liberty.

Process West Hood Scoop Splitter 04-07 Forester XT w/ 02 STI Hood Scoop

$345.00

Tax included. Shipping calculated at checkout.

A common mistake people make when upgrading the intercooler on their Subaru is not fitting a hood scoop splitter to suit. A larger intercooler has many benefits, including that the large surface area can spread heat for effectively. But if the stock splitter is in place, the intercooler's efficiency is decreased majorly.

Another mistake is to remove the splitter all together. This is a bad idea because it then allows for the air flowing though the hood to then go around and miss the intercooler all together. This then results in the intercooler soaking up heat also causing the intake air temps to rise, therefore reducing power.

The best solution is the Process West intercooler splitter, which purpose is to form a complete seal around the intercooler, forcing cooling air through the core, lowering intake air temperature and increasing power. This splitter is designed specifically for the Process West Top Mount Intercooler.

Details:

Helps takes advantage of larger intercooler
Forces air to flow through the whole intercooler
Suits Foresters running the larger 2002 STI Hood Scoop

Process West Hood Scoop Splitter 04-07 Forester XT w/ Stock Hood Scoop

$345.00

Tax included. Shipping calculated at checkout.

A common mistake people make when upgrading the intercooler on their Subaru is not fitting a hood scoop splitter to suit. A larger intercooler has many benefits, including that the large surface area can spread heat for effectively. But if the stock splitter is in place, the intercooler's efficiency is decreased majorly.

Another mistake is to remove the splitter all together. This is a bad idea because it then allows for the air flowing though the hood to then go around and miss the intercooler all together. This then results in the intercooler soaking up heat also causing the intake air temps to rise, therefore reducing power.

The best solution is the Process West intercooler splitter, which purpose is to form a complete seal around the intercooler, forcing cooling air through the core, lowering intake air temperature and increasing power. This splitter is designed specifically for the Process West Top Mount Intercooler.

Details:

Helps takes advantage of larger intercooler
Forces Air to flow through the whole intercooler
Comes included with all Process West Top Mount Kits

Process West Top Mount Intercooler Kit 04-07 Forester XT

$1,375.00

Tax included. Shipping calculated at checkout.

The goal when developing our new top mounted intercooler was to make it the very best aftermarket top mounted intercooler for the Forester.

We studied our competitors products and fixed all of the mistakes they have made...some of them major.

The most obvious error that every one of our competitors makes is not supplying their intercooler with proper ducting/shrouding to suit the increased size of the new intercooler. There is no point in installing a larger intercooler and leaving the factory under bonnet splitter/shroud in place. Here is the solution. A properly sized splitter/shroud to suit the application.

Details:

Core Size: 490 x 193 x 90mm
Silicone Y-Pipe
Hood Splitter included

K&N Panel Filter 01-7 WRX/STI 03-07 Forester 99-03 Liberty

$112.95

Tax included. Shipping calculated at checkout.

A simple to install Lifetime Air Filter is backed by the K&N Million Mile Limited Warranty

Designed to increase horsepower and acceleration while providing exceptional engine protection.

K&N Air Filters are made of 4 to 6 layers of cotton gauze sandwiched between two epoxy-coated aluminum wire screens

K&N Air Filters allow dramatically more air into an engine

K&N Air Filters are washable, reusable, and will protect your engine for the life of your vehicle

Height 29mm
Outside Length 279mm
Outside Width 167mm

Pierburg 3 Port Boost Solenoid Subaru Universal

$148.95

Tax included. Shipping calculated at checkout.

Unlike the factory solenoid,this 3-Port Solenoid allows you to raise the factory boost levels with more response and adding more control.

With this solenoid no boost pressure is allowed through to the actuator so no premature boost can occur. The 3-Port Solenoid allows lower wastegate duty cycle to produce higher boost pressures with much greater control,thereby allowing tuners more “headroom” and “space” when modifying high horsepower turbo vehicles.

The kit includes the 3-Port Boost Control Solenoid and harness for plug and play install with Subaru models. We recommend using it only with hoses of the highest quality.

Tuning Notes:

Because this upgraded solenoid affects the way that your vehicle controls boost, it is always recommended that you consult with a tuner immediately following installation. It is not recommended that you drive the car in a way that builds boost without doing so. If you have any questions, don't hesitate to get in touch with us directly!

Suits:

All Turbo Subaru Models

Forester Inc XT 03-07 (SG)

Please Select