Levorg 14+

Genuine Subaru Oil Filter #15208AA170 

Genuine Subaru Sump Plug Gasket

The most restrictive component of the factory exhaust system is the down-pipe which begins right after the turbocharger. Invidia Exhausts use a larger pipe diameter and smooth bends allows the turbocharger to exhale exhaust gases with fewer restrictions and turbulence. Because of these reasons, Invidia down-pipes make for the most popular exhaust upgrade that adds a substantial bump in both horsepower and torque with a great reduction in turbo lag.

To withstand the high temperatures seen at the turbocharger laser cut cast steel flanges are used to ensure long lasting leak free reliability. A High-Flow catalytic converted is utilised to control emissions for street driving legalities but with minimal impact to exhaust flow. Designed locally to suit Australian Specification Vehicles, this is a 100% bolt on installation for right-hand drive vehicles with no modifications or changes to the steering knuckle required.  Factory O2 sensor locations are also retained to ensure compatibility with factory systems.

• Ceramic Stealth Advanced Technology for whisper quiet braking, silky smooth operation, noticeably less dust.
• Noise Absorbing Shims for reduced transmission of vibration and noise from the brake pad during extreme braking.

Suits:

So how much more can you do with a blow-off valve? Well, the Deceptor Pro II takes the ‘Respons’ concept even further...

• Remote proportional venting bias/volume control- from silent to loud or anywhere in between
• Sleek, compact in-car BOV volume controller with backlit dial
• End point adjustment to control maximum vent to atmosphere bias setting
• Volume adjustment mechanism driven by a high-torque geared electric motor
• Durable, low-friction gear train supported by precision sealed ball-bearing
• Supplied with all parts and wiring required to have it up and running quickly and easily

Suits:

• 10-14 (BM, BR) Liberty GT 

Install Guide

So how much more can you do with a blow-off valve? Well, the Deceptor Pro II takes the ‘Respons’ concept even further...

• Remote proportional venting bias/volume control- from silent to loud or anywhere in between
• Sleek, compact in-car BOV volume controller with backlit dial
• End point adjustment to control maximum vent to atmosphere bias setting
• Volume adjustment mechanism driven by a high-torque geared electric motor
• Durable, low-friction gear train supported by precision sealed ball-bearing
• Supplied with all parts and wiring required to have it up and running quickly and easily

Suits:

• 14-On XT Forester SJ (FA20 Engine)
  
• 15-On WRX  (FA20 Engine)
  
• 16 On Levorg FB16/FA20 Turbo

Install Guide

• 1 Strut Brace
  

Suits:

• Subaru 15-20 Levorg
  
• Subaru 15-20 VA WRX & STI

Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 26mm 2 point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Notes: 
26mm 2 Point Adjustable

• 1 Sway Bar
  
• 2 Bushings
• Install Guide

Suits:

Engineered to 'Activate More Grip', BSK017 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 26mm 2 point adjustable front sway bar and 22mm 3 point adjustable rear sway bar, the kit is completed with high quality sway bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.

Notes:
Contains:

• BSF47Z
  
• BSR49XZ
• KLC172
• KLC182 

• 2 Sway Bars
  
• 4 Links
• 4 Bushings
• 2 Braces
• 4 Spacers
• 2 Bolts
• 8 Washers
• 2 Nuts
• Install Guide
• Grease

Suits:

• Subaru 15-20 VA WRX 
• Subaru 15-20 VM Levorg 

The ultimate entry level suspension upgrade! Performance, handling and comfort make up the Grip Series Stage 1 kit featuring Whiteline signature front and rear adjustable (where applicable) swaybars, drop links and performance lowering springs.

Notes:
Vehicle Sway Bar & Lowered Spring Kit

Contains:

• WSK-SUB008
  
• BSK017

• 4 Springs
  
• 2 Sway Bars
• 4 Links
• 4 Bushings
• 2 Braces
• 4 Spacers
• 2 Bolts
• 8 Washers
• 2 Nuts
• Install Guide
• Grease

Suits:

• Subaru 15-20 VA WRX 
  
• Subaru 15-20 Levorg 
  

Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Notes: 

• 2 Links
  
• 4 Spacers
• 2 Bolts
• 4 Washers
• 2 Nuts
• Install Guide
• Grease

Suits:

Whiteline adjustable camber kits provide the ability to fine tune camber settings for optimum tyre contact resulting in improved vehicle handling and increased tyre life. The kit includes low compliance synthetic elastomer bushings which help maintain preferred alignment settings as well as providing enhanced steering response.

Notes: 
On-Car Adjustable Allows +/- 0.75deg camber
Kits Required: 1

Warranty: 3 Year / 60,000Kms
Kit Contents:

• 8 Bushings
• 4 Tubes
• 8 Bolts
• 8 Washers
• 4 Nuts
• Install Guide
• Grease

Suits:

• Subaru 12-20 BRZ/86  
  
• Subaru 08-13 SH, SJ Forester Incl Turbo
• Subaru 08-14 Impreza WRX & STI 
• Subaru 15-20  WRX & STI
• Subaru 15-20 Levorg 
• Subaru 09-20 BM,BR,BN, BS Liberty Incl Turbo & Outback 
• Subaru 12-20 XV 

A common serviceable item, worn joints exhibit excess movement and are commonly diagnosed simply from knocking and rattling noises coming from the upright or hub area. If worn and not replaced, these joints can have significant negative impact on wheel alignment and resulting uneven tyre wear or scrub. Whiteline's replacement joints boast superior internal joint structure for improved performance and durability. The outer housing also features a chamfered leading edge for ease of installation.

Notes: 

40.2mm OD spherical bearing
Kits Required: 1
Warranty: 3 Year / 60,000Kms
Kit Contents:

• 2 Bearings

Suits:

• Subaru 12-20 BRZ/86
• Subaru 08-18 SH, SJ Forester Incl Turbo
• Subaru 08-14 Impreza WRX & STI
• Subaru 15-20 WRX & STI
• Subaru 15-20 Levorg
• Subaru 15-20 BN,BS Liberty Incl Turbo & Outback
• Subaru 12-20 XV

Genuine Subaru Bottom Radiator Hose

Suits: