Liberty Inc GT 04-09 (BL, BP)

Extreme High-Output Ethanol Friendly Fuel Pump

A true ethanol and petroleum friendly fuel pump with flow/pressure capabilities to deliver fuel for up to 350kw at the wheels.

Note: Modifications to the factory fuel pump carrier bracket or module are required.

Our Extreme High-Output Fuel Pumps do not have a check valve, therefore slightly longer ‘cranking’ periods are experience before the engine ‘fires-up’, this is a positive side-effect for engine longevity.

You can also choose to add a one way check valve if you prefer:

Raceworks One Way Check Valve

Note: In place of the BR540 on its own we recommend a Boxer Performance Parts 700HP Subaru Fuel Pump Module for MY08-MY14 WRX, MY08-MY20 STI, MY08-MY13 XT Forester, MY04-MY10 GT Liberty.

Extreme High-Output Ethanol Friendly Fuel Pump Module Assembly

A complete ‘drop-in’ replacement fuel pump module, featuring the Bosch Motorsport BR540 true ethanol and petroleum friendly fuel pump with flow/pressure capabilities to deliver fuel for up to 350kw at the wheels.

 For over 300KW at the wheels, a MagnaFuel Fuel Pressure Regulator is required to be fitted to your engine in place of the OEM fuel pressure regulator.

Note:

Our Extreme Hi-Output Fuel Pumps do not have a check valve, therefore slightly longer ‘cranking’ periods are experience before the engine ‘fires-up’, this is a positive side-effect for engine longevity.

Increasing the intercooler surface area beyond that of the factory unit is all well and good but only if all of the ambient air is available to all of the upgrade intercooler so maximum heat exchange can take place. The answer here is of course a revised under bonnet duct.

The new Process West 04-09 Liberty GT Top Mount Intercooler addresses all of the above issues and it does it very well. Process West's new Top Mounted Intercooler is virtually a small front mounted intercooler mounted in the engine bay.

With a massive 400mm flow length (almost double the factory unit) and a not too thick 90mm bar and plate core an effective top mount is now here.

Details:

• Core Size: 400 x 198 x 90mm
• Strong & Durable Intercooler Hoses included
• Hood Splitter included

Features 

• Designed to increase horsepower and acceleration while providing exceptional engine protection.
• K&N Air Filters are made of 4 to 6 layers of cotton gauze sandwiched between two epoxy-coated aluminum wire screens
• K&N Air Filters allow dramatically more air into an engine
• K&N Air Filters are washable & reusable

Details:

• Designed to replace the restrictive factory air intake tract
• Fabricated from lightweight CNC mandrel bent aluminium tube and has a CNC machined air flow meter mount
• Comes complete with a K&N high flow air filter which is enclosed in the inner guard
• Powdercoated black for a factory-look finish

Unlike the factory solenoid,this 3-Port Solenoid allows you to raise the factory boost levels with more response and adding more control.

With this solenoid no boost pressure is allowed through to the actuator so no premature boost can occur. The 3-Port Solenoid allows lower wastegate duty cycle to produce higher boost pressures with much greater control,thereby allowing tuners more “headroom” and “space” when modifying high horsepower turbo vehicles.

The kit includes the 3-Port Boost Control Solenoid and harness for plug and play install with Subaru models. We recommend using it only with hoses of the highest quality.

Tuning Notes:

Because this upgraded solenoid affects the way that your vehicle controls boost, it is always recommended that you consult with a tuner immediately following installation. It is not recommended that you drive the car in a way that builds boost without doing so. If you have any questions, don't hesitate to get in touch with us directly!

Suits:

• All Turbo Subaru Models