Most Popular

The Process West Engine Cover Garnish is finished in an attractive and durable wrinkle coat. Available in both red or black its a great alternative to the standard dull cover.

This part is supplied with all the fixings to complete the job.

Details:

• Fits in factory location
• Supplied with all necessary parts to complete the install
• Available in Red or Black wrinkle coat finish

Direct Fit High-Output 300L/H Replacement Ethanol Friendly Fuel Pump

A true ethanol and petroleum friendly replacement fuel pump with flow/pressure capabilities to deliver fuel for up to 280kw at the wheels.

We recommend a Boxer Performance Parts In-Tank Fitting Kit for MY94-MY07 Impreza, WRX, STI, Forester + MY94-MY03 Liberty, Outback.

Note: Our High-Output Fuel Pumps do not have a check valve, therefore slightly longer ‘cranking’ periods are experience before the engine ‘fires-up’, this is a positive side-effect for engine longevity.

Raceworks One Way Check Valve

Genuine Subaru Sump Pan Oil Seal

Genuine Subaru Turbo Oil Drain Hose 

The Whiteline shifter bushing kit has been engineered to eliminate that sloppy, plush shifter feel found in the rubber OEM bushings. By drastically reducing the bushing compliance, improves the crispness of cross gate up and downshifts removing the potential of missed and poor shifts. Also incorporating a radius edged flanged bushing head reduces any potential of bushing grab or stiction on the mounting faces during the initial shifting moment allowing a bind free clean gear shift.

Notes: 

• 3 Bushings
• 3 Tubes
• Install Guide
• Grease

Suits:

• Subaru 2000-20 STI Only
• Subaru 03-09 Liberty

 Generic image used, actual product may vary

Genuine Subaru VF52 Single Scroll Turbo

Vehicle Fitment:

Direct Bolt-On for following models

• 1999-2000 Subaru WRX
• 2001-2007 Subaru WRX
• 1999-2000 Subaru STI
• 2001-2007 Subaru STI
• 2008-2014 Subaru STI
• 2015-2021 Subaru STI
• 1997-2002 Subaru Forester GT
• 2003-2008 Subaru Forester XT
• 1998-2003 Subaru Liberty GT (Single-Turbo Only)

Can fit to the models below however aftermarket intercooler with alternate traditional STI style hot-side intercooler hose is required

• 2008-2014 Subaru WRX
• 2008-2013 Subaru Forester XT
• 2007-2009 Subaru Liberty GT

• 2008-2014 Subaru WRX
• 2008-2013 Subaru Forester XT
• 2007-2009 Subaru Liberty GT

Cylinder 4 cooling has long been a known issue on the EJ Family of Subaru engines. The nature of the water passageways around this area means a lack of cooling can lead to an increase in the temperatures around this cylinder.

RCM's simple solution to this problem lies in our easy to fit complete kit. Billet fittings are banded in place on our custom 90 degree Samco silicon hose, which you simply fit into the unused port at the back of the block at cylinder 4's location. This is then tee'd into the water matrix pipe directly above using the supplied HiGrip stainless steel fittings. The billet barb fitting is of the correct diameter to allow the right flow rate around cylinder 4 to cool without over cooling, and the 90 degree pre-formed Samco hose ensures that this flow is maintained without disturbance from potential kinks in the pipework.

Suits all EJ Engines

So how much more can you do with a blow-off valve? Well, the Deceptor Pro II takes the ‘Respons’ concept even further...

• Remote proportional venting bias/volume control- from silent to loud or anywhere in between
• Sleek, compact in-car BOV volume controller with backlit dial
• End point adjustment to control maximum vent to atmosphere bias setting
• Volume adjustment mechanism driven by a high-torque geared electric motor
• Durable, low-friction gear train supported by precision sealed ball-bearing
• Supplied with all parts and wiring required to have it up and running quickly and easily

Suits:

• 01-07 Impreza WRX & STI  
  
• 08-21 STI Only
• 05-07 XT Forester (Facelift Model)

Install Guide

Suits:

• 01-17 STI (2-Piston Brembo)

Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

This is modified based on N35S and shows stiff pedal and good wear.

The bite level is not different from N35S, but the responding is little bit quick. But you need long pre-bedding.

Friction Average: 0.40 - 0.45 

Purpose: Rally & Race Sprint-Medium

Material: Semi Metal

Suits: 

• Brembo STI (Excludes Spec R)

This is modified based on N35S and shows stiff pedal and good wear.

The bite level is not different from N35S, but the responding is little bit quick. But you need long pre-bedding.

Friction Average: 0.40 - 0.45 

Purpose: Rally & Race Sprint-Medium

Material: Semi Metal

Suits:

• Brembo STI (Excludes Spec R)

Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

Genuine Subaru STI Timing Belt #ST130284S000

EVOLVE is engineered as a high performance brake pad suited to street applications and spirited driving.

Bremtec EVOLVE® performance brake pads offer excellent initial cold bite stopping power and increased high resistance to brake fade in extreme conditions. The formulation offers exceptional pedal feel even after continued repeated hard stops corner after corner and provides extended life for both the disc rotor and the brake pad.

Ideal for entry level track work and high performance street

Suits:

• 18- Onwards STI (Spec R Brembo Hyper Yellow Calipers)

EVOLVE is engineered as a high performance brake pad suited to street applications and spirited driving.

Bremtec EVOLVE® performance brake pads offer excellent initial cold bite stopping power and increased high resistance to brake fade in extreme conditions. The formulation offers exceptional pedal feel even after continued repeated hard stops corner after corner and provides extended life for both the disc rotor and the brake pad.

Ideal for entry level track work and high performance street

Suits:

• 01-17 STI (2-Piston Brembo)

EVOLVE is engineered as a high performance brake pad suited to street applications and spirited driving.

Bremtec EVOLVE® performance brake pads offer excellent initial cold bite stopping power and increased high resistance to brake fade in extreme conditions. The formulation offers exceptional pedal feel even after continued repeated hard stops corner after corner and provides extended life for both the disc rotor and the brake pad.

Ideal for entry level track work and high performance street

Suits:

• 01-17 STI (4-Piston Brembo)

Air Pump deletes are the perfect solution to removing the troublesome factory air pump system. CNC machined from Billet Aluminium and annodised in Black, these delete plates will cover the open ports on the cylinder heads with style. Included are two delete plates and stainless steel fasteners.

Vehicle Fitment:

• 2006-2014 Impreza WRX EJ25
• 2006-2020 Impreza WRX STI EJ25
• 2007-2009 Liberty GT EJ25
• 2008-2012 SH Forester XT EJ25

Note:

 Tuning is required after installation to resolve codes caused by removing air pump system.

Air Pump deletes are the perfect solution to removing the troublesome factory air pump system. CNC machined from Billet Aluminium and annodised in Black, these delete plates will cover the open ports on the cylinder heads with style. Included are two delete plates and stainless steel fasteners.

Vehicle Fitment:

• 2006-2014 Impreza WRX EJ25
• 2006-2020 Impreza WRX STI EJ25
• 2007-2009 Liberty GT EJ25
• 2008-2012 SH Forester XT EJ25

Note:

 Tuning is required after installation to resolve codes caused by removing air pump system.

KPM  injectors are developed with the highest precision engineering. All KPM Fuel System products are of the highest quality, through premium manufacturing processes. Our fuel injectors are serialised and individually characterised to ensure the highest level of performance and reliability.

Upgrading the fuel injection is vital once modifications are made to increase horsepower. Giving more flexibility for tuning and is necessary once the limit of the factory injectors/fuel system is reached.

Theses injectors are suitable for mild – heavily modified vehicles. Allowing increased fuel flow and developed for performance tuning. The injectors are a complete, machined, flow tested set. Along with the injectors we provide the scaling data used for precise tuning.

Vehicle compatibility: 

• 99-00 Impreza WRX & STI (Additional Radium Fuel Rail Required)
• 01-14 Impreza WRX
• 01-20 Impreza WRX STI (STI Only)
• 06-12 Forester XT
• 07-12 Liberty GT

Includes Injector Connecter Adaptors Where Required