HKS STAINLESS DUAL RESONATED FRONT PIPE BRZ/86

HKS STAINLESS DUAL RESONATED FRONT PIPE BRZ/86

$555.95

Tax included. Shipping calculated at checkout.

HKS STAINLESS DUAL RESONATED FRONT PIPE BRZ/86

The main part for the high output is the exhaust manifold shown on the right graph.

We recommend having a total full straight exhaust tuning by having more power by changing the muffler and exhaust manifold and tune the sound with the front pipe.
* If the exhaust manifold is changed, the engine check light might be turn on for a certain combination.

**Off Road Use Only**

Kap Industries Fire Extinguisher Bracket BRZ

Kap Industries Fire Extinguisher Bracket BRZ

$115.95

Tax included. Shipping calculated at checkout.

Kap Industries Fire Extinguisher Bracket BRZ

This Fire Extinguisher Bracket fits both Drivers Side and Passenger Side of the Toyota GT86 / Subaru BRZ / Scion FRS. Including Left Hand Drive and Right Hand Drive!

Made from 2mm Steel and Powder Coated Black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser-cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Every Purchase Includes:

1 x Toyota GT86/Subaru BRZ/Scion FRS Fire Extinguisher Bracket
2 x M5 High Tensile Steel Locknuts
2 x M5 High Tensile Steel Hex Bolts

How to Install:

Undo front seat bolts with an E Torx E10 or Socket that will fit.
Place the extinguisher cage on the bracket.
Lift the front of the seat and slip bracket under.
Reinstall bolts and tighten up each bolt.

Please Note:

Seat bolts are easily cross-threaded.
Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

Note: Does Not Include Fire Extinguisher

Grimmspeed Hood Struts BRZ/86

$239.95

Tax included. Shipping calculated at checkout.

Tired of that ugly OEM hood prop blocking your view of that beautiful boxer engine? Always wanted to open your hood with just a couple fingers? Annoyed that the hood prop is always in your way while you’re working in your engine bay? GrimmSpeed to the rescue. With meticulous design and quality materials, this kit delivers in a big way. We hate to use the "P" word, but designing this kit to be perfectly balanced was a requirement. Lift the hood halfway and you'll find a generous neutral zone. Leave your hood here for a sleek look at that local car show. Alternatively, a flick of the wrist is all that's required to coax your hood into its fully opened position. To close, simply hold the hood below its neutral zone and let go. No need to risk scratches or deformation by pushing your hood closed.

Design
We began by mapping the hood and engine bay for a number of test vehicles in 3D CAD. From there, a lifting linkage was designed, analyzed, prototyped and tested. Our in-house 3D printer facilitated a fast, efficient design cycle and we were able to move into production using some of the worlds most advanced CNC machining equipment. What that means for you is a system that will fit and operate correctly, every single time, for years to come. The fender ball studs were also designed specifically for the application, to adapt our high-quality, American Made struts to the metric threads found on your Subaru. What about those struts, you ask? They're beefy. Custom built to our exacting specifications, these struts feature a large diameter body that provides excellent opening force without sacrificing smoothness and control.

Materials
With the use and exposure that a hood strut kit will see on a regular basis, material selection and finishing options are critically important. All brackets are machined from locally sourced 6061 Aluminum. After an initial quality inspection, each part is anodized with a sleek, black finish. The threaded ball studs are machined from Stainless Steel to ensure that no potentially corrosive material is being introduced to your vehicles chassis. The next key component is the struts themselves. More specifically, these are referred to as gas springs. Manufactured in the USA, these are of the highest quality and are used by OEMs around the world. Last, but certainly not least, is the included hardware. All hardware is grade 8.8 or higher and black zinc coated for longevity.

Specifications

Opens Hood 35% Higher Than OEM
Better access and light for workingPerfect Hood Balance
Struts are balanced for all GD chassis hoods
Eliminates OEM Hood Prop
No risk of hood falling, more access when wrenchingCNC Machined Brackets
Machined for a perfect fitPremium Quality Struts
Larger strut body for smoother operation, made in the USA!
Durable Hard Anodized Finish
Protects brackets from corrosion with an OEM finishFARO Arm Designed
Allows more precise design and a stronger, better fitting product

Ryco Z411ST Oil Filter

$24.95

Tax included. Shipping calculated at checkout.

Ryco SynTec Synthetic Nano Fibre Media
99.8% Efficiency
Silicone Anti Drain Back Valve
Teflon Coated Gasket
Ryco SynTec gives you the ultimate in engine protection
High efficiency media designed to remove more dirt keeping your engine cleaner

Part # Z411ST
Height Overall 85.00 mm
Diameter 68.00 mm
Seal Diameter 63.00 mm
Thread M20 x 1.5
Relief Valve Yes
Anti Drain Back Valve Yes
Anti Syphon Valve No
Micron Rating (@ 98.7% efficiency) 20.00

Suits FA/FB Style Engines

Genuine Subaru Spark Plug #22401AA801

$38.95

Tax included. Shipping calculated at checkout.

Genuine Subaru Spark Plug

NGK ZXE27HBR8

Price is Per Plug

4x Required Per Car

Suits:

13+ BRZ/86

*If Unsure Please Confirm With VIN Number*

HKS Race Suction Reloaded Air Intake Kit BRZ/86

$899.95

Tax included. Shipping calculated at checkout.

FEATURES

You can have strong power in the high RPM and better response from open and close of throttle with air flow adapter casting short suction pipe and heat insulator.
You don't need sound creator. The direct sound from the engine is good enough.
We have stabilised the intake air temperature by shutting off the hot air from the radiator and set the cooler for fresh air with a shroud.

HKS Hi-Power Spec-L Burnt Tip Cat Back Light Weight Exhaust BRZ/86

$2,295.95

Tax included. Shipping calculated at checkout.

HKS Hi-Power Spec-L Burnt Tip Cat Back Light Weight Exhaust BRZ/86

The HKS Hi-Power SPEC-L Exhaust System has been designed to enhance your driving experience. Because the 2.5” piping ID on this exhaust system is larger when compared to stock, it allows the exhaust flow to be significantly improved for more horsepower, and low-end torque.

However the benefits don’t stop there, your car will acquire a more aggressive exhaust tone as well. The HKS Hi-Power Spec-L exhaust system has been fabricated from 304 stainless steel, and features 100MM titanium tips to complement the exterior. This is a 100% bolt-on product that comes supplied with hardware to make for a ready installation.

The exhaust hangers have been welded on their factory locations to make for a great fitment.

HKS HI-POWER SPEC L 2 II BRZ/86

$2,243.95

Tax included. Shipping calculated at checkout.

HKS HI-POWER SPEC L 2 II BRZ/86

As light as Titanium
HKS has achieved a weight reduction comparable to the titanium exhaust system by utilizing ultra lightweight components for each part's material for pipes and silencers. The weight of the exhaust compared to factory one is reduced from about 30% up to 60%, which leads to improved driving performance.
Improved exhaust efficiency with a straight through structure
A straight through structure greatly improves exhaust efficiency. HKS also design exhaust for a sporty and comfortable sound based on each vehicle individual specifications.
Titanium tail tip cover
New series feature a titanium tail tip cover instead of carbon. Burnt titanium tail tips add to racing atmosphere. HKS now offer an optional tail tip cover*. There are three types of optional tail tip cover available. A standard titanium, a familiar carbon cover, and a new cool looking Neuse tail tip cover made with blue stainless steel.

HKS Billet Oil Filler Cap

$99.95

Tax included. Shipping calculated at checkout.

New aluminum filler cap cover to brighten up the engine bay!

HKS Oil Cooler Kit BRZ/86 NA Kit

$1,260.00

Tax included. Shipping calculated at checkout.

Newly designed single tube type fitting.
From engine bench tests and experience from D1 racing it is found that the oil pressure of the FA20 engine is extremely high compared to the conventional mass-produced engines. (Max oil pressure: over 12kgf/cm²) New single tube fitting withstanding the high oil pressure was newly designed and included in the kit.
Including the pre-assembled hose, bracket, and air guide and locating the core in front of the radiator enable an easy installation. Also, there is no major modification required to the chassis.
Special spacer and center bolts were designed exclusively for this kit to install the oil cooler attachment without modification.
The thin 15-layer core improves the cooling performance and makes installation easier.
This kit is applicable only to the NA engine.

Parts Included:

Oil Cooler Core / S-type Attachment / Spacer / Center Bolt / Banjo / Banjo Bolt / Bracket / Air guide / Accessory Parts

To suit NA Models only, other kits are to suit turbo/supercharged BRZ/86s

HKS Oil Cooler Kit BRZ/86 Pre 2016

$1,395.00

Tax included. Shipping calculated at checkout.

An Oil Cooler Kit from HKS will help keep the temperature of your engine oil down even on powerful tuned cars being driven hard.

While your car does have a cooling system, this is designed for an engine with standard power output being driven on the road in a relatively calm fashion. As soon as you're taking a car on track, tuning an engine for big power, or driving especially hard, you can see engine oil temperatures start to creep up.

This is bad because above a certain temperature engine oil starts to break down.

A HKS Oil-Cooler adds an external radiator through which the oil passes and is cooled much more effectively than by the stock system.

The kits come with a thermostat. Just as you don't want oil to be too hot, it also needs to reach a certain temperature to protect the engine properly. Adding a thermostat to the system stops the oil from being circulated through the cooler until it's reached the proper temperature ensuring the engine is protected when cold as well as hot. This is perfect for road usage where an engine can take quite some time to reach temperature.

Kits labelled as "Sandwich Plate" use a sandwich plate type connector.

Kits labelled as "Oil Filter Relocation" relocate the oil filter away from the standard location for clearance reasons.

Pre 08/16 Built BRZ/86

HKS Front Overpipe 1 Piece BRZ/86

$495.00

Tax included. Shipping calculated at checkout.

HKS releases a new exhaust joint pipe that goes in the middle of primary and secondary catalytic converter.

Stock φ54 pipe is a bottleneck even in the factory exhaust system. HKS pipe size is increased up to φ60 that greatly improves exhaust efficiency and goes great with bolt on turbo kit.

Stock φ54 pipe was purposely dented in several places for preventing interference with other vehicle parts (see photo). On the other hand, HKS joint pipe is φ60 and it was made in a layout without these dents. Due to the bigger bend radius than stock, the exhaust pressure is reduced and the power is increased.

HKS Oil Pan BRZ/86 ZN6

$595.00

Tax included. Shipping calculated at checkout.

Oil pan for popular bolt on turbo kit for 86/BRZ

Features

Oil Pan for easy setup with GTIII-RS turbine 86 (11001-AT005, 11001-KT001). Stock oil pan replacement is pre-fitted with oil return pipe, ready for installation of turbo.
Strong welding on inside and outside reinforces the structure and additional bracket is used to improve strength to avoid risk of leakage.
Parts were carefully painted to enhance safety in long-term usage.

Kit Parts

Oil pan
Seal ring

Street Fighter Injectors BRZ/86 1000CC

$485.95

Tax included. Shipping calculated at checkout.

KPM injectors are developed with the highest precision engineering. All KPM Fuel System products are of the highest quality, through premium manufacturing processes. Our fuel injectors are serialised and individually characterised to ensure the highest level of performance and reliability.

Upgrading the fuel injection is vital once modifications are made to increase horsepower. Giving more flexibility for tuning and is necessary once the limit of the factory injectors/fuel system is reached.

Theses injectors are suitable for mild – heavily modified vehicles. Allowing increased fuel flow and developed for performance tuning. The injectors are a complete, machined, flow tested set. Along with the injectors we provide the scaling data used for precise tuning.

Vehicle compatibility:

BRZ/86

Includes Injector Connecter Adaptors Where Required

HKS Oil Cooler Kit BRZ/86 2016+

$1,595.00

Tax included. Shipping calculated at checkout.

An Oil Cooler Kit from HKS will help keep the temperature of your engine oil down even on powerful tuned cars being driven hard.

While your car does have a cooling system, this is designed for an engine with standard power output being driven on the road in a relatively calm fashion. As soon as you're taking a car on track, tuning an engine for big power, or driving especially hard, you can see engine oil temperatures start to creep up.

This is bad because above a certain temperature engine oil starts to break down.

A HKS Oil-Cooler adds an external radiator through which the oil passes and is cooled much more effectively than by the stock system.

The kits come with a thermostat. Just as you don't want oil to be too hot, it also needs to reach a certain temperature to protect the engine properly. Adding a thermostat to the system stops the oil from being circulated through the cooler until it's reached the proper temperature ensuring the engine is protected when cold as well as hot. This is perfect for road usage where an engine can take quite some time to reach temperature.

Kits labelled as "Sandwich Plate" use a sandwich plate type connector.

Kits labelled as "Oil Filter Relocation" relocate the oil filter away from the standard location for clearance reasons.

Many of the kits are supplied with an air guide intended to channel air onto the cooler, even at angles off-centre (important for drivers collecting flies on their side windows). This will be indicated in the item subtitle.

08/16 Onwards Built BRZ/86

Xtreme Flywheel Single Mass Chromoly FSU103C

$379.95

Tax included. Shipping calculated at checkout.

Designed by Xtreme Clutch an Australian brand known for performance and quality within the Japanese tuner scene. This lightweight single mass chromoly flywheel is both strong and reliable (compared to OE dual mass flywheels) and provides increased engine response which is ideal for use on performance vehicles.

Made from a tough & lightweight high carbon chromoly steel
Reduced weight provides increased engine response
Ideal for use in performance vehicles

Made from a high carbon chromoly steel, this flywheel is both strong and lightweight. Engineered to have an increased thermal capacity, this flywheel is an ideal choice for high performance engine applications.

Additionally fitting this lightweight flywheel can result in easier gear-shifts (example, revs dropping quicker for upshifts and raising quicker on a throttle blip for downshifts).

Being both strong and lightweight ensures a combination of both reliability and responsiveness, which are desirable qualities when used in a high-performance vehicle.

Suits:

06-14 Impreza WRX EJ25
BRZ/86
Liberty (Please Check Fitment)

*If Unsure Please Contact Us To Confirm Fitment*

Customer Reviews

No reviews yet Write a review

Brake Cylinder Stopper BRZ/86

$99.95

Tax included. Shipping calculated at checkout.

A simple way to improve the brakes on any car is to reduce the FLEXIBILITY in the brake system, such as:

Improve hydraulics (lines and better fluid)
Improve mechanical parts (rotors, pads)
Improve master cylinder mounting points. (At the firewall)

Modern cars have reduced strength in their firewalls where the brake master cylinder mounts. This flexibility contributes to spongy brakes.

By fitting a support bracket it supports the master cylinder from the bulkhead to the strut tower. This provides firm, positive feel to the brake pedal.

Designed for drivers by drivers.