BRZ/86 12+

Genuine Subaru Spark Plug Seal

2x Required Per Side

 Generic image used, actual product may vary

Tired of that ugly OEM hood prop blocking your view of that beautiful boxer engine? Always wanted to open your hood with just a couple fingers? Annoyed that the hood prop is always in your way while you’re working in your engine bay? GrimmSpeed to the rescue. With meticulous design and quality materials, this kit delivers in a big way. We hate to use the "P" word, but designing this kit to be perfectly balanced was a requirement. Lift the hood halfway and you'll find a generous neutral zone. Leave your hood here for a sleek look at that local car show. Alternatively, a flick of the wrist is all that's required to coax your hood into its fully opened position. To close, simply hold the hood below its neutral zone and let go. No need to risk scratches or deformation by pushing your hood closed.

Design
We began by mapping the hood and engine bay for a number of test vehicles in 3D CAD. From there, a lifting linkage was designed, analyzed, prototyped and tested. Our in-house 3D printer facilitated a fast, efficient design cycle and we were able to move into production using some of the worlds most advanced CNC machining equipment. What that means for you is a system that will fit and operate correctly, every single time, for years to come. The fender ball studs were also designed specifically for the application, to adapt our high-quality, American Made struts to the metric threads found on your Subaru. What about those struts, you ask? They're beefy. Custom built to our exacting specifications, these struts feature a large diameter body that provides excellent opening force without sacrificing smoothness and control.

Materials
With the use and exposure that a hood strut kit will see on a regular basis, material selection and finishing options are critically important. All brackets are machined from locally sourced 6061 Aluminum. After an initial quality inspection, each part is anodized with a sleek, black finish. The threaded ball studs are machined from Stainless Steel to ensure that no potentially corrosive material is being introduced to your vehicles chassis. The next key component is the struts themselves. More specifically, these are referred to as gas springs. Manufactured in the USA, these are of the highest quality and are used by OEMs around the world. Last, but certainly not least, is the included hardware. All hardware is grade 8.8 or higher and black zinc coated for longevity.

Specifications

• Opens Hood 35% Higher Than OEM
• Better access and light for workingPerfect Hood Balance
• Struts are balanced for all GD chassis hoods
• Eliminates OEM Hood Prop
• No risk of hood falling, more access when wrenchingCNC Machined Brackets
• Machined for a perfect fitPremium Quality Struts
• Larger strut body for smoother operation, made in the USA!
• Durable Hard Anodized Finish
• Protects brackets from corrosion with an OEM finishFARO Arm Designed
•  Allows more precise design and a stronger, better fitting product

• Ceramic Stealth Advanced Technology for whisper quiet braking, silky smooth operation, noticeably less dust.
• Noise Absorbing Shims for reduced transmission of vibration and noise from the brake pad during extreme braking.

Suits:

• 08-14 WRX (2-Piston)
• 03-07 Forester XT SG (2-Piston)**
• 08-12 Forester XT SH (2-Piston)
• 12+ BRZ/86

**SG Forester has two possible caliper options either 4-Piston DB1170 or 2-Piston DB1491. Check pad shapes to confirm correct pad for your model.

 Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

• Direct Fitment
  
• Stainless Steel
  
• Added 'boxer rumble' exhaust note
  
• Improved torque
  
• Improved exhaust efficiency
  
• Slide Adjusters allowing for heat expansion
  
• High quality, ridged flanges
  
• Gaskets and studs included
  

Genuine Subaru Spark Plug

NGK ZXE27HBR8

Price is Per Plug

4x Required Per Car

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

Specifications:

• Diameter 294 mm
• Height 57 mm 
• Thickness 24 mm 
• Min Thickness 22 mm
• Inner Diameter 58 mm
• Number of Holes 5
• Pitch Circle Ø 100 mm

 Suits:

• 99-14 Impreza WRX 
• 03-13 Forester 
• 04-09 Liberty
• 98-15 Outback
• 12-18 BRZ/86 

Please measure factory discs and compare with the specifications above to confirm fitment.

  Price is per disc, 2 required per vehicle

KPM  injectors are developed with the highest precision engineering. All KPM Fuel System products are of the highest quality, through premium manufacturing processes. Our fuel injectors are serialised and individually characterised to ensure the highest level of performance and reliability.

Upgrading the fuel injection is vital once modifications are made to increase horsepower. Giving more flexibility for tuning and is necessary once the limit of the factory injectors/fuel system is reached.

Theses injectors are suitable for mild – heavily modified vehicles. Allowing increased fuel flow and developed for performance tuning. The injectors are a complete, machined, flow tested set. Along with the injectors we provide the scaling data used for precise tuning.

Vehicle compatibility: 

• BRZ/86

Includes Injector Connecter Adaptors Where Required

Designed by Xtreme Clutch an Australian brand known for performance and quality within the Japanese tuner scene. This lightweight single mass chromoly flywheel is both strong and reliable (compared to OE dual mass flywheels) and provides increased engine response which is ideal for use on performance vehicles.

• Made from a tough & lightweight high carbon chromoly steel
• Reduced weight provides increased engine response
• Ideal for use in performance vehicles

Made from a high carbon chromoly steel, this flywheel is both strong and lightweight. Engineered to have an increased thermal capacity, this flywheel is an ideal choice for high performance engine applications.

Additionally fitting this lightweight flywheel can result in easier gear-shifts (example, revs dropping quicker for upshifts and raising quicker on a throttle blip for downshifts).

Being both strong and lightweight ensures a combination of both reliability and responsiveness, which are desirable qualities when used in a high-performance vehicle.

Suits:

• 06-14 Impreza WRX EJ25
• BRZ/86
• Liberty (Please Check Fitment)

 *If Unsure Please Contact Us To Confirm Fitment*

Omni Power USA 2.5, 3, 4 & 5 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.

Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.

With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage. 

Key features:

• Cases are designed to withstand in excess of 130 PSI without leaking
• -40 to 260 degrees Fahrenheit temperature operating range
• Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).
• Automatic temperature compensation.
• True linear scaling for perfect drivability at all boost and vacuum levels.
• Compatible with all aftermarket engine management systems.
• Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.
• Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.
• Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.
• Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.

*Please note vehicle will require tuning after installation*

Project Mu Hyper Carbon +

Project MU HC is a premium Performance Street and Rally brake pad. HC has more bite than both NS and B-Spec and has excellent fade resistance. Capable of operating at temperatures up to 800°c, this pad will handle almost all serious braking conditions. 
HC is a genuine ‘cross over’ pad suitable for both road and track Use. HC is extremely capable in competition environments so use this pad if you are involved in serious track day, rally and hill climb. 
Along with temperature capabilities, HC is renowned as a ‘drivers pad’ with unmatched driver feel and control.

Friction Co Efficient .38-.62

Temperature Range 0-800°

Compound Hyper Carbon

Suits:

• 08-14 WRX (1-Piston)
• 08-12 Forester XT SH (1-Piston) 12-18 SJ
• 03-14  Liberty
• 03-09  Outback
• 12+ BRZ/86 (1-Piston)

Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

Project Mu Hyper Carbon +

Project MU HC is a premium Performance Street and Rally brake pad. HC has more bite than both NS and B-Spec and has excellent fade resistance. Capable of operating at temperatures up to 800°c, this pad will handle almost all serious braking conditions. 
HC is a genuine ‘cross over’ pad suitable for both road and track Use. HC is extremely capable in competition environments so use this pad if you are involved in serious track day, rally and hill climb. 
Along with temperature capabilities, HC is renowned as a ‘drivers pad’ with unmatched driver feel and control.

Friction Co Efficient .38-.62

Temperature Range 0-800°

Compound Hyper Carbon

Suits:

• 15+ WRX (1-Piston)
• 12+ BRZ/86 (1-Piston)

Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

Project Mu Hyper Carbon +

Project MU HC is a premium Performance Street and Rally brake pad. HC has more bite than both NS and B-Spec and has excellent fade resistance. Capable of operating at temperatures up to 800°c, this pad will handle almost all serious braking conditions. 
HC is a genuine ‘cross over’ pad suitable for both road and track Use. HC is extremely capable in competition environments so use this pad if you are involved in serious track day, rally and hill climb. 
Along with temperature capabilities, HC is renowned as a ‘drivers pad’ with unmatched driver feel and control.

Friction Co Efficient .38-.62

Temperature Range 0-800°

Compound Hyper Carbon

Suits:

• 08-14 WRX (2-Piston)
• 03-07 Forester XT SG (2-Piston)**
• 08-12 Forester XT SH (2-Piston)
• 12+ BRZ/86

**SG Forester has two possible caliper options either 4-Piston DB1170 (Brembo Style) or 2-Piston DB1491. Check pad shapes to confirm correct pad for your model.

 Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

• Ceramic Stealth Advanced Technology for whisper quiet braking, silky smooth operation, noticeably less dust.
• Noise Absorbing Shims for reduced transmission of vibration and noise from the brake pad during extreme braking.

Suits:

• 08-14 WRX (1-Piston)
• 08-12 Forester XT SH (1-Piston) 12-18 SJ
• 03-14  Liberty
• 03-09  Outback
• 12+ BRZ/86 (1-Piston)

Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

• Direct Fitment
  
• Stainless Steel
  
• Added 'boxer rumble' exhaust note
  
• Improved torque
  
• Improved exhaust efficiency
  
• Slide Adjusters allowing for heat expansion
  
• High quality, ridged flanges
  
• Gaskets and studs included
  

Stainless steel construction.

Over pipe included.