Please Select
- Christmas Picks
-
-
- All Engine
-
-
-
-
-
-
-
-
-
-
- All Motor Builds
- Anodized Bolt Kits
- Con Rod Bearings
- Con Rods
- Crankshaft
- Delete/Relocation Kits
- Drive Belts/Timing Belts
- Engine Accessories
- Gaskets
- Head Bolts/Studs
- Head Gaskets
- Hoses & Fittings
- Lubricants/Sealant/Grease
- Main Bearings
- PCV Hoses
- Pistons & Rings
- Pulleys
- Running In Oil
- Short Blocks
- Timing Belt Kits
- TGV Delete Kits
-
-
- Superchargers
- Turbo/Turbo Kits
-
-
-
-
- STI
- Tools
-
-
-
- ACL
- ACS-Australian Clutch Services
- ACT-Australian Clutch Technology
- Alcon
- APR Performance
- ARP
- Autometer
- ABW Motorsport
- Armorall
- Autoglym
- AVO
- Bendix
- Blouch
- Bosch
- Bowdens Own
- Boxer Performance Parts
- Brembo
- Bremtec
- Carillo
- Clutch Pro
- Cobb
- Cosworth
- CRC
- Cusco
- Dayco
- DBA
- Dixcel
- DTM Racing
- Ecliptech
- Endless
- Exedy
- G Loc
- Genuine Subaru
- GFB
- Goodridge
- Greddy
- Grimmspeed
- H&R
- Hankook
- Hardrace
- Hella
- Hot Wheels
- HKS
- IAG
- Invidia
- K&N
- Killer B
- King Springs
- Kitten
- Koyorad
- Loctite
- Lucas
- Magnafuel
- Manley
- MCA
- Meguiars
- Mishimoto
- Motul
- MRT
- Narva
- NGK
- NRG Innovations
- OS Giken
- Penrite
- Permatex
- Pierburg
- PPG Performance Gearboxes
- Process West
- Project Kics
- Project Mu
- PSR
- PWR
- Race Works
- Rain-X
- Radium
- Rally Armor
- RCM Roger Clark Motorsport
- Redline
- Rota Wheels
- Ryco
- Sakura
- Silvers Suspension
- Siruda
- Sparco
- STI
- Street Fighter
- Tomei
- Torque Solutions
- Turbosmart
- ULX 110
- VDO
- Velo
- Whiteline
- Winmax
- Wynns
- Xtreme Performance
- Zeitronix
- Christmas Picks
-
-
- All Engine
-
-
-
-
-
-
-
-
-
-
- All Motor Builds
- Anodized Bolt Kits
- Con Rod Bearings
- Con Rods
- Crankshaft
- Delete/Relocation Kits
- Drive Belts/Timing Belts
- Engine Accessories
- Gaskets
- Head Bolts/Studs
- Head Gaskets
- Hoses & Fittings
- Lubricants/Sealant/Grease
- Main Bearings
- PCV Hoses
- Pistons & Rings
- Pulleys
- Running In Oil
- Short Blocks
- Timing Belt Kits
- TGV Delete Kits
-
-
- Superchargers
- Turbo/Turbo Kits
-
-
-
-
- STI
- Tools
-
-
-
- ACL
- ACS-Australian Clutch Services
- ACT-Australian Clutch Technology
- Alcon
- APR Performance
- ARP
- Autometer
- ABW Motorsport
- Armorall
- Autoglym
- AVO
- Bendix
- Blouch
- Bosch
- Bowdens Own
- Boxer Performance Parts
- Brembo
- Bremtec
- Carillo
- Clutch Pro
- Cobb
- Cosworth
- CRC
- Cusco
- Dayco
- DBA
- Dixcel
- DTM Racing
- Ecliptech
- Endless
- Exedy
- G Loc
- Genuine Subaru
- GFB
- Goodridge
- Greddy
- Grimmspeed
- H&R
- Hankook
- Hardrace
- Hella
- Hot Wheels
- HKS
- IAG
- Invidia
- K&N
- Killer B
- King Springs
- Kitten
- Koyorad
- Loctite
- Lucas
- Magnafuel
- Manley
- MCA
- Meguiars
- Mishimoto
- Motul
- MRT
- Narva
- NGK
- NRG Innovations
- OS Giken
- Penrite
- Permatex
- Pierburg
- PPG Performance Gearboxes
- Process West
- Project Kics
- Project Mu
- PSR
- PWR
- Race Works
- Rain-X
- Radium
- Rally Armor
- RCM Roger Clark Motorsport
- Redline
- Rota Wheels
- Ryco
- Sakura
- Silvers Suspension
- Siruda
- Sparco
- STI
- Street Fighter
- Tomei
- Torque Solutions
- Turbosmart
- ULX 110
- VDO
- Velo
- Whiteline
- Winmax
- Wynns
- Xtreme Performance
- Zeitronix
127 products
Genuine Subaru Oil Filler Cap O'Ring #803942010
Regular price $8.95 Save $-8.95Genuine Subaru Spark Plug Seal #13293AA051
Regular price $18.95 Save $-18.95Genuine Subaru Spark Plug Seal
2x Required Per Side
Boxer Intro to Racing Pack
Regular price $120.00 Save $-120.00This Fire Extinguisher Bracket fits both Drivers Side and Passenger Side of your vehicle.
Made from 2mm Steel and Powder Coated Black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!
Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.
Designed in CAD, laser-cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.
Every Purchase Includes:
- 1 x Fire Extinguisher Bracket
- 2 x M5 High Tensile Steel Locknuts
- 2 x M5 High Tensile Steel Hex Bolts
- Fire Extinguisher 1kg
- Decal Pack
How to Install:
- Undo front seat bolts with an E Torx E10 or Socket that will fit.
- Place the extinguisher cage on the bracket.
- Lift the front of the seat and slip bracket under.
- Reinstall bolts and tighten up each bolt.
Please Note:
- Seat bolts are easily cross-threaded.
- Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
- Please be careful when installing. Kap Industries takes no responsibility for incorrect install.
HKS STAINLESS DUAL RESONATED FRONT PIPE BRZ/86
Regular price $555.95 Save $-555.95HKS STAINLESS DUAL RESONATED FRONT PIPE BRZ/86
The main part for the high output is the exhaust manifold shown on the right graph.
We recommend having a total full straight exhaust tuning by having more power by changing the muffler and exhaust manifold and tune the sound with the front pipe.
* If the exhaust manifold is changed, the engine check light might be turn on for a certain combination.
**Off Road Use Only**
Grimmspeed Hood Struts BRZ/86
Regular price $239.95 Save $-239.95Tired of that ugly OEM hood prop blocking your view of that beautiful boxer engine? Always wanted to open your hood with just a couple fingers? Annoyed that the hood prop is always in your way while you’re working in your engine bay? GrimmSpeed to the rescue. With meticulous design and quality materials, this kit delivers in a big way. We hate to use the "P" word, but designing this kit to be perfectly balanced was a requirement. Lift the hood halfway and you'll find a generous neutral zone. Leave your hood here for a sleek look at that local car show. Alternatively, a flick of the wrist is all that's required to coax your hood into its fully opened position. To close, simply hold the hood below its neutral zone and let go. No need to risk scratches or deformation by pushing your hood closed.
Design
We began by mapping the hood and engine bay for a number of test vehicles in 3D CAD. From there, a lifting linkage was designed, analyzed, prototyped and tested. Our in-house 3D printer facilitated a fast, efficient design cycle and we were able to move into production using some of the worlds most advanced CNC machining equipment. What that means for you is a system that will fit and operate correctly, every single time, for years to come. The fender ball studs were also designed specifically for the application, to adapt our high-quality, American Made struts to the metric threads found on your Subaru. What about those struts, you ask? They're beefy. Custom built to our exacting specifications, these struts feature a large diameter body that provides excellent opening force without sacrificing smoothness and control.
Materials
With the use and exposure that a hood strut kit will see on a regular basis, material selection and finishing options are critically important. All brackets are machined from locally sourced 6061 Aluminum. After an initial quality inspection, each part is anodized with a sleek, black finish. The threaded ball studs are machined from Stainless Steel to ensure that no potentially corrosive material is being introduced to your vehicles chassis. The next key component is the struts themselves. More specifically, these are referred to as gas springs. Manufactured in the USA, these are of the highest quality and are used by OEMs around the world. Last, but certainly not least, is the included hardware. All hardware is grade 8.8 or higher and black zinc coated for longevity.
Specifications
- Opens Hood 35% Higher Than OEM
- Better access and light for workingPerfect Hood Balance
- Struts are balanced for all GD chassis hoods
- Eliminates OEM Hood Prop
- No risk of hood falling, more access when wrenchingCNC Machined Brackets
- Machined for a perfect fitPremium Quality Struts
- Larger strut body for smoother operation, made in the USA!
- Durable Hard Anodized Finish
- Protects brackets from corrosion with an OEM finishFARO Arm Designed
- Allows more precise design and a stronger, better fitting product
Ryco Z411ST Oil Filter
Regular price $24.95 Save $-24.95- Ryco SynTec Synthetic Nano Fibre Media
- 99.8% Efficiency
- Silicone Anti Drain Back Valve
- Teflon Coated Gasket
- Ryco SynTec gives you the ultimate in engine protection
- High efficiency media designed to remove more dirt keeping your engine cleaner
Part # Z411ST
Height Overall 85.00 mm
Diameter 68.00 mm
Seal Diameter 63.00 mm
Thread M20 x 1.5
Relief Valve Yes
Anti Drain Back Valve Yes
Anti Syphon Valve No
Micron Rating (@ 98.7% efficiency) 20.00
Suits FA/FB Style Engines
Bendix DB1491GCT Front Brake Pads 08-14 WRX 03-07/08-12 Forester XT 2012+ BRZ/86
Regular price $79.95 Save $-79.95• Ceramic Stealth Advanced Technology for whisper quiet braking, silky smooth operation, noticeably less dust.
• Noise Absorbing Shims for reduced transmission of vibration and noise from the brake pad during extreme braking.
Suits:
- 08-14 WRX (2-Piston)
- 03-07 Forester XT SG (2-Piston)**
- 08-12 Forester XT SH (2-Piston)
- 12+ BRZ/86
**SG Forester has two possible caliper options either 4-Piston DB1170 or 2-Piston DB1491. Check pad shapes to confirm correct pad for your model.
Please confirm pad shape by comparing existing pad against the blueprint in the second photo.
Genuine Subaru Crankshaft Bolt #12369AA011
Regular price $23.95 Save $-23.95
PSR Unequal Length Headers BRZ/86
Regular price $1,099.00 Save $-1,099.00
- Direct Fitment
- Stainless Steel
- Added 'boxer rumble' exhaust note
- Improved torque
- Improved exhaust efficiency
- Slide Adjusters allowing for heat expansion
- High quality, ridged flanges
- Gaskets and studs included
Grimmspeed Intake Kit BRZ/86
Regular price $699.00 Save $-699.00
The design of the Grimmspeed Cold Air Intake started as a solution to fill simple needs. They wanted it to not only be safe for the engine but also be able to run with or without a tune. They wanted it to be able to install quickly without removal of the front bumper. They wanted an intake that can make power all throughout the power range instead of just top end power. In the end, they ended up with a complete airbox system that can mimic the factory Air/Fuel ratio. Many Many hours of research and development went into this airbox before they were confident in the final product. They started with a 3d map of the engine bay to ensure perfect fitment of all parts. The intake tube used eliminates the 90 degree bend present in the factory piece. It is replaced with a hard inlet that offers a much more mild bend with better flow characteristics and not only decreases wind resistance, but also helps with accurate MAF (Mass Airflow Sensor) readings. The tube itself features an internal air straightener that sorts out the flow going into your engine. The tube then leads into the sealed airbox where the MAF sensor is located to keep away from the heat of the engine and headers to prevent skewed readings.
The airbox is laser cut, CNC bent, then riveted together before it is powdercoated with a heavy duty wrinkle black finish. The MAF flanges are CNC machined from 6061 aluminum while the intake tube is fabricated using custom bent tubing that is the perfect diameter for this specific application. Laser cut from the same 6061 aluminum, the air straightener is TIG welded into place. After welding, each tube is inspected and ported to ensure maximum performance. The tubes are available in either Red or Black for your choice.
The whole kit includes everything needed for install. It comes with the Airbox assembly, Intake tube, a high flow oiled air filter, 3ft of rubber sealing strip, noise generator delete plug, and all hardware to put it all together.
Goodridge Braided Brake Line Kit
Regular price $188.95 Save $-188.95
Generic image used, actual product may vary
Genuine Subaru Spark Plug #22401AA801
Regular price $38.95 Save $-38.95Genuine Subaru Spark Plug
NGK ZXE27HBR8
Price is Per Plug
4x Required Per Car
- 13+ BRZ/86
*If Unsure Please Confirm With VIN Number*
Invidia Front Pipe w/High Flow Cat BRZ & Toyota 86 12-21, 22+ (6MT)
Regular price $899.00 Save $-899.00***Suits manual transmission only ***
The factory exhaust will always have restrictions and these restrictions are normally highest near where the catalytic converter is found. Invidia Exhausts use a larger pipe diameter and smooth bends which allows exhaust gases to pass with fewer restrictions and turbulence. A High-Flow catalytic converter is then utilised to still control emissions for street driving legalities but with minimal impact to exhaust flow. In some cases Invidia will also offer catless versions for off-road use where every ounce of performance is required.
Because of these reasons, Invidia front pipes and cat pipes make for the most popular exhaust upgrade that adds a substantial bump in both horsepower and torque.
To withstand the high temperatures laser cut cast steel flanges are used to ensure long lasting leak free reliability. This is a 100% bolt on installation for right-hand drive vehicles with no modifications or changes required. Factory O2 sensor locations are also retained where required to ensure compatibility with factory systems.
HKS Race Suction Reloaded Air Intake Kit BRZ/86
Regular price $899.95 Save $-899.95FEATURES
- You can have strong power in the high RPM and better response from open and close of throttle with air flow adapter casting short suction pipe and heat insulator.
- You don't need sound creator. The direct sound from the engine is good enough.
- We have stabilised the intake air temperature by shutting off the hot air from the radiator and set the cooler for fresh air with a shroud.
HKS Hi-Power Spec-L Burnt Tip Cat Back Light Weight Exhaust BRZ/86
Regular price $2,295.95 Save $-2,295.95HKS HI-POWER SPEC L 2 II BRZ/86
Regular price $2,243.95 Save $-2,243.95-
As light as Titanium
HKS has achieved a weight reduction comparable to the titanium exhaust system by utilizing ultra lightweight components for each part's material for pipes and silencers. The weight of the exhaust compared to factory one is reduced from about 30% up to 60%, which leads to improved driving performance. -
Improved exhaust efficiency with a straight through structure
A straight through structure greatly improves exhaust efficiency. HKS also design exhaust for a sporty and comfortable sound based on each vehicle individual specifications. -
Titanium tail tip cover
New series feature a titanium tail tip cover instead of carbon. Burnt titanium tail tips add to racing atmosphere. HKS now offer an optional tail tip cover*. There are three types of optional tail tip cover available. A standard titanium, a familiar carbon cover, and a new cool looking Neuse tail tip cover made with blue stainless steel.
HKS Billet Oil Filler Cap
Regular price $99.95 Save $-99.95New aluminum filler cap cover to brighten up the engine bay!
HKS Oil Cooler Kit BRZ/86 NA Kit
Regular price $1,260.00 Save $-1,260.00- Newly designed single tube type fitting.
- From engine bench tests and experience from D1 racing it is found that the oil pressure of the FA20 engine is extremely high compared to the conventional mass-produced engines. (Max oil pressure: over 12kgf/cm²) New single tube fitting withstanding the high oil pressure was newly designed and included in the kit.
- Including the pre-assembled hose, bracket, and air guide and locating the core in front of the radiator enable an easy installation. Also, there is no major modification required to the chassis.
- Special spacer and center bolts were designed exclusively for this kit to install the oil cooler attachment without modification.
- The thin 15-layer core improves the cooling performance and makes installation easier.
- This kit is applicable only to the NA engine.
Parts Included:
Oil Cooler Core / S-type Attachment / Spacer / Center Bolt / Banjo / Banjo Bolt / Bracket / Air guide / Accessory Parts
To suit NA Models only, other kits are to suit turbo/supercharged BRZ/86s
HKS Oil Cooler Kit BRZ/86 Pre 2016
Regular price $1,395.00 Save $-1,395.00An Oil Cooler Kit from HKS will help keep the temperature of your engine oil down even on powerful tuned cars being driven hard.
While your car does have a cooling system, this is designed for an engine with standard power output being driven on the road in a relatively calm fashion. As soon as you're taking a car on track, tuning an engine for big power, or driving especially hard, you can see engine oil temperatures start to creep up.
This is bad because above a certain temperature engine oil starts to break down.
A HKS Oil-Cooler adds an external radiator through which the oil passes and is cooled much more effectively than by the stock system.
The kits come with a thermostat. Just as you don't want oil to be too hot, it also needs to reach a certain temperature to protect the engine properly. Adding a thermostat to the system stops the oil from being circulated through the cooler until it's reached the proper temperature ensuring the engine is protected when cold as well as hot. This is perfect for road usage where an engine can take quite some time to reach temperature.
Kits labelled as "Sandwich Plate" use a sandwich plate type connector.
Kits labelled as "Oil Filter Relocation" relocate the oil filter away from the standard location for clearance reasons.
Pre 08/16 Built BRZ/86
HKS Front Overpipe 1 Piece BRZ/86
Regular price $495.00 Save $-495.00HKS releases a new exhaust joint pipe that goes in the middle of primary and secondary catalytic converter.
Stock φ54 pipe is a bottleneck even in the factory exhaust system. HKS pipe size is increased up to φ60 that greatly improves exhaust efficiency and goes great with bolt on turbo kit.
Stock φ54 pipe was purposely dented in several places for preventing interference with other vehicle parts (see photo). On the other hand, HKS joint pipe is φ60 and it was made in a layout without these dents. Due to the bigger bend radius than stock, the exhaust pressure is reduced and the power is increased.
HKS Oil Pan BRZ/86 ZN6
Regular price $595.00 Save $-595.00Oil pan for popular bolt on turbo kit for 86/BRZ
Features
- Oil Pan for easy setup with GTIII-RS turbine 86 (11001-AT005, 11001-KT001). Stock oil pan replacement is pre-fitted with oil return pipe, ready for installation of turbo.
- Strong welding on inside and outside reinforces the structure and additional bracket is used to improve strength to avoid risk of leakage.
- Parts were carefully painted to enhance safety in long-term usage.
Kit Parts
- Oil pan
- Seal ring
Kap Industries Fire Extinguisher Bracket BRZ
Regular price $115.95 Save $-115.95This Fire Extinguisher Bracket fits both Drivers Side and Passenger Side of the Toyota GT86 / Subaru BRZ / Scion FRS. Including Left Hand Drive and Right Hand Drive!
Made from 2mm Steel and Powder Coated Black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!
Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.
Designed in CAD, laser-cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.
Every Purchase Includes:
- 1 x Toyota GT86/Subaru BRZ/Scion FRS Fire Extinguisher Bracket
- 2 x M5 High Tensile Steel Locknuts
- 2 x M5 High Tensile Steel Hex Bolts
How to Install:
- Undo front seat bolts with an E Torx E10 or Socket that will fit.
- Place the extinguisher cage on the bracket.
- Lift the front of the seat and slip bracket under.
- Reinstall bolts and tighten up each bolt.
Please Note:
- Seat bolts are easily cross-threaded.
- Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
- Please be careful when installing. Kap Industries takes no responsibility for incorrect install.
Note: Does Not Include Fire Extinguisher
Street Fighter Injectors BRZ/86 1000CC
Regular price $429.95 Save $-429.95KPM injectors are developed with the highest precision engineering. All KPM Fuel System products are of the highest quality, through premium manufacturing processes. Our fuel injectors are serialised and individually characterised to ensure the highest level of performance and reliability.
Upgrading the fuel injection is vital once modifications are made to increase horsepower. Giving more flexibility for tuning and is necessary once the limit of the factory injectors/fuel system is reached.
Theses injectors are suitable for mild – heavily modified vehicles. Allowing increased fuel flow and developed for performance tuning. The injectors are a complete, machined, flow tested set. Along with the injectors we provide the scaling data used for precise tuning.
Vehicle compatibility:
- BRZ/86
Includes Injector Connecter Adaptors Where Required
Whiteline WSK-SUB006 Front & Rear Lowering Spring Kit BRZ/86
Regular price $471.30 Save $-471.30Notes:
Front & Rear Performance Coil Spring Kit
- 4 Springs
Suits:
- BRZ/86
HKS Oil Cooler Kit BRZ/86 2016+
Regular price $1,595.00 Save $-1,595.00An Oil Cooler Kit from HKS will help keep the temperature of your engine oil down even on powerful tuned cars being driven hard.
While your car does have a cooling system, this is designed for an engine with standard power output being driven on the road in a relatively calm fashion. As soon as you're taking a car on track, tuning an engine for big power, or driving especially hard, you can see engine oil temperatures start to creep up.
This is bad because above a certain temperature engine oil starts to break down.
A HKS Oil-Cooler adds an external radiator through which the oil passes and is cooled much more effectively than by the stock system.
The kits come with a thermostat. Just as you don't want oil to be too hot, it also needs to reach a certain temperature to protect the engine properly. Adding a thermostat to the system stops the oil from being circulated through the cooler until it's reached the proper temperature ensuring the engine is protected when cold as well as hot. This is perfect for road usage where an engine can take quite some time to reach temperature.
Kits labelled as "Sandwich Plate" use a sandwich plate type connector.
Kits labelled as "Oil Filter Relocation" relocate the oil filter away from the standard location for clearance reasons.
Many of the kits are supplied with an air guide intended to channel air onto the cooler, even at angles off-centre (important for drivers collecting flies on their side windows). This will be indicated in the item subtitle.
08/16 Onwards Built BRZ/86
Xtreme Flywheel Single Mass Chromoly FSU103C
Regular price $379.95 Save $-379.95Designed by Xtreme Clutch an Australian brand known for performance and quality within the Japanese tuner scene. This lightweight single mass chromoly flywheel is both strong and reliable (compared to OE dual mass flywheels) and provides increased engine response which is ideal for use on performance vehicles.
- Made from a tough & lightweight high carbon chromoly steel
- Reduced weight provides increased engine response
- Ideal for use in performance vehicles
Made from a high carbon chromoly steel, this flywheel is both strong and lightweight. Engineered to have an increased thermal capacity, this flywheel is an ideal choice for high performance engine applications.
Additionally fitting this lightweight flywheel can result in easier gear-shifts (example, revs dropping quicker for upshifts and raising quicker on a throttle blip for downshifts).
Being both strong and lightweight ensures a combination of both reliability and responsiveness, which are desirable qualities when used in a high-performance vehicle.
Flywheel Step (mm) | -2.0mm |
Ring Gear Teeth Count | 124 |
Flywheel Mounting Holes | 8 |
Flywheel Mounting Hole Diameter (mm) | 10.5mm |
Note | Chromoly |
Weight | 6.35 Kg |
Suits:
- 06-14 Impreza WRX EJ25
- BRZ/86
- Liberty (Please Check Fitment)
*If Unsure Please Contact Us To Confirm Fitment*
Customer Reviews
OMNI Power MAP Sensor BRZ/86
Regular price $189.95 Save $-189.95
Omni Power USA 2.5, 3, 4 & 5 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.
Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.
With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage.
Key features:
- Cases are designed to withstand in excess of 130 PSI without leaking
- -40 to 260 degrees Fahrenheit temperature operating range
- Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).
- Automatic temperature compensation.
- True linear scaling for perfect drivability at all boost and vacuum levels.
- Compatible with all aftermarket engine management systems.
- Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.
- Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.
- Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.
- Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.
*Please note vehicle will require tuning after installation*