Please Select
- Christmas Picks
-
-
- All Engine
-
-
-
-
-
-
-
-
-
-
- All Motor Builds
- Anodized Bolt Kits
- Con Rod Bearings
- Con Rods
- Crankshaft
- Delete/Relocation Kits
- Drive Belts/Timing Belts
- Engine Accessories
- Gaskets
- Head Bolts/Studs
- Head Gaskets
- Hoses & Fittings
- Lubricants/Sealant/Grease
- Main Bearings
- PCV Hoses
- Pistons & Rings
- Pulleys
- Running In Oil
- Short Blocks
- Timing Belt Kits
- TGV Delete Kits
-
-
- Superchargers
- Turbo/Turbo Kits
-
-
-
-
- STI
- Tools
-
-
-
- ACL
- ACS-Australian Clutch Services
- ACT-Australian Clutch Technology
- Alcon
- APR Performance
- ARP
- Autometer
- ABW Motorsport
- Armorall
- Autoglym
- AVO
- Bendix
- Blouch
- Bosch
- Bowdens Own
- Boxer Performance Parts
- Brembo
- Bremtec
- Carillo
- Clutch Pro
- Cobb
- Cosworth
- CRC
- Cusco
- Dayco
- DBA
- Dixcel
- DTM Racing
- Ecliptech
- Endless
- Exedy
- G Loc
- Genuine Subaru
- GFB
- Goodridge
- Greddy
- Grimmspeed
- H&R
- Hankook
- Hardrace
- Hella
- Hot Wheels
- HKS
- IAG
- Invidia
- K&N
- Killer B
- King Springs
- Kitten
- Koyorad
- Loctite
- Lucas
- Magnafuel
- Manley
- MCA
- Meguiars
- Mishimoto
- Motul
- MRT
- Narva
- NGK
- NRG Innovations
- OS Giken
- Penrite
- Permatex
- Pierburg
- PPG Performance Gearboxes
- Process West
- Project Kics
- Project Mu
- PSR
- PWR
- Race Works
- Rain-X
- Radium
- Rally Armor
- RCM Roger Clark Motorsport
- Redline
- Rota Wheels
- Ryco
- Sakura
- Silvers Suspension
- Siruda
- Sparco
- STI
- Street Fighter
- Tomei
- Torque Solutions
- Turbosmart
- ULX 110
- VDO
- Velo
- Whiteline
- Winmax
- Wynns
- Xtreme Performance
- Zeitronix
- Christmas Picks
-
-
- All Engine
-
-
-
-
-
-
-
-
-
-
- All Motor Builds
- Anodized Bolt Kits
- Con Rod Bearings
- Con Rods
- Crankshaft
- Delete/Relocation Kits
- Drive Belts/Timing Belts
- Engine Accessories
- Gaskets
- Head Bolts/Studs
- Head Gaskets
- Hoses & Fittings
- Lubricants/Sealant/Grease
- Main Bearings
- PCV Hoses
- Pistons & Rings
- Pulleys
- Running In Oil
- Short Blocks
- Timing Belt Kits
- TGV Delete Kits
-
-
- Superchargers
- Turbo/Turbo Kits
-
-
-
-
- STI
- Tools
-
-
-
- ACL
- ACS-Australian Clutch Services
- ACT-Australian Clutch Technology
- Alcon
- APR Performance
- ARP
- Autometer
- ABW Motorsport
- Armorall
- Autoglym
- AVO
- Bendix
- Blouch
- Bosch
- Bowdens Own
- Boxer Performance Parts
- Brembo
- Bremtec
- Carillo
- Clutch Pro
- Cobb
- Cosworth
- CRC
- Cusco
- Dayco
- DBA
- Dixcel
- DTM Racing
- Ecliptech
- Endless
- Exedy
- G Loc
- Genuine Subaru
- GFB
- Goodridge
- Greddy
- Grimmspeed
- H&R
- Hankook
- Hardrace
- Hella
- Hot Wheels
- HKS
- IAG
- Invidia
- K&N
- Killer B
- King Springs
- Kitten
- Koyorad
- Loctite
- Lucas
- Magnafuel
- Manley
- MCA
- Meguiars
- Mishimoto
- Motul
- MRT
- Narva
- NGK
- NRG Innovations
- OS Giken
- Penrite
- Permatex
- Pierburg
- PPG Performance Gearboxes
- Process West
- Project Kics
- Project Mu
- PSR
- PWR
- Race Works
- Rain-X
- Radium
- Rally Armor
- RCM Roger Clark Motorsport
- Redline
- Rota Wheels
- Ryco
- Sakura
- Silvers Suspension
- Siruda
- Sparco
- STI
- Street Fighter
- Tomei
- Torque Solutions
- Turbosmart
- ULX 110
- VDO
- Velo
- Whiteline
- Winmax
- Wynns
- Xtreme Performance
- Zeitronix
9 products
Penrite Green OEM Coolant Pre Mix 5L
Regular price $39.95 Save $-39.95Green OEM Coolant Premix is a GENUINE GLYSANTIN® G48®, Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved, Type "A" Ethylene glycol, Anti-Freeze Anti-Boil coolant as used in initial manufacturer factory fills. It uses a technically advanced HYBRID (HOAT - Hybrid Organic Acid Technology) based inhibitor system that is Phosphate, Amine and Nitrite free. The extended long life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system for 8 years or 500,000km. It is available in both concentrate and premix formulations.
Green OEM Coolant Premix is mixed at a 50% concentration level as per initial manufacturer requirements.
PLEASE NOTE: Green OEM Coolant Concentrate replaces 7 Year Green Coolant concentrate, 4 Year Long Drain Anti Freeze Anti Boil Coolant and Heavy Duty 50/50 premix
APPLICATION
Green OEM Coolant Premix is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel and industrial engines where Hybrid (HOAT) type anti-freeze / anti-boil and anti-corrosion properties are required.
Green OEM Coolant Premix is suitable for passenger cars, 4WD's, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment. It is especially suited to vehicles of European origin such as Audi / VW (G11), BMW, Mercedes, Porsche (Pre-1995), Volvo, Opel & Saab, but it may be used in all types of vehicles.
Green OEM Coolant Premix provides long-term protection against rust and corrosion for all materials used in the engine and in the cooling system construction. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics used for the cooling system construction. It is effective in all cast iron aluminium engines that are under load or used in extreme hot and cold climates.
Green OEM Coolant Premix may be used in all types of vehicles that use green, blue or yellow coloured initial fill coolants and it is also suitable for use in out of warranty service to maintain OEM performance. It is also ideal for motorcycles.
Green OEM Coolant Premix is a 50% concentration formulation and is ready to use directly from the container. It is pre-mixed with Penrite De-Mineralised Water and can be poured directly into the cooling system. No further dilution is required. It can be used as a complete service refill, top up or is safe to mix with compatible Type A coolant. Penrite recommend that a 50% concentration level should be maintained for maximum, performance and longevity of the coolant and protection of the cooling system.
- OEM Approved to maintain manufacturer’s warranty & specifications
- 8 Year 500,000km drain intervals if used and maintained at 50%
- Protects all internal surfaces from corrosion
- Phosphate free formulation allows hard water use
- Nitrite and amine free
DOSE RATE - FREEZING POINT BOILING POINT
Mix Ratio 50%
Freezing Point -38°C
Boiling Point +109°C
Penrite Blue OEM Coolant Pre Mix 5L
Regular price $58.95 Save $-58.95Blue OEM Coolant Premix is a GENUINE GLYSANTIN® G30® Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved, Type "A" Ethylene glycol, Anti-Freeze Anti-Boil cooIant as used in initial manufacturer factory fills. It uses a technically advanced OAT (Organic Acid Technology) based inhibitor system that is Silicate, Phosphate, Amine, Borate and Nitrite free. The extended long life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system for 8 years or 500,000km.
Blue OEM Coolant Premix is mixed at a 50% concentration level as per initial OEM requirements.
PLEASE NOTE: Blue OEM Coolant Premix replaces 7 Year 450,000 KM Blue Coolant Premix, 5 Year Extended Drain Anti Freeze Anti Boil Premix Coolant and Blue Premix Coolant
APPLICATION
Blue OEM Coolant Premix is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel and industrial engines where an OAT type anti-freeze / anti-boil and anti-corrosion properties are required.
Blue OEM Coolant Premix Coolant is suitable for passenger cars, 4WD's, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment. It is suitable for use with Australian, European, Asian & US vehicles It is Silicate, Borate and Phosphate Free making it particularly suitable for both European & Japanese vehicles that use blue coloured coolant such as Nissan, Subaru & Suzuki.
Blue OEM Coolant Premix provides long-term protection against rust and corrosion for all materials used in the engine and in the cooling system construction. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics used in the cooling system. It is particularly effective in all cast aluminium engines that are under load or used in extreme hot and cold climates.
Blue OEM Coolant Premix may be used in all types of vehicles that use blue coloured initial fill coolants and it is also suitable for use in out of warranty service to maintain OEM performance. It is also ideal for motorcycles.
Blue OEM Coolant Premix is a 50% concentration formulation and is ready to use directly from the container. It is pre-mixed with Penrite De-Mineralised Water and can be poured directly into the cooling system. No further dilution is required. It can be used as a complete service refill, top up or is safe to mix with compatible Type A coolant. Penrite recommend that a 50% concentration level should be maintained for maximum, performance and longevity of the coolant and protection of the cooling system.
Blue OEM Coolant is also available as a concentrate.
Penrite Radiator Flush effectively cleans the system in 7 minutes and prepares the cooling system for new coolant.
DOSE RATE - FREEZING POINT BOILING POINT
Mix Ratio 50%
Freezing Point -38°C
Boiling Point +109°C
- 8 Year 500,000km drain intervals if used and maintained at 50%
- OEM Approved to maintain manufacturer’s warranty & specifications
- Compatible with plastics, rubbers and seals.
- Protects all internal surfaces from corrosion, including aluminium.
- Phosphate free formulation allows use with hard water.
- Silicate, Nitrite, Nitrate and amine free.
Penrite Demineralised Water
Regular price $8.95 Save $-8.95Application:
Demineralised Water is suitable for mixing with engine coolants to achieve the desired concentration level of the coolant. It can be used with both Type A (Anti-Freeze Anti-Boil) coolants and Type B (Inhibitor Only) coolants. It is suitable for all conventional type coolants including OAT and Hybrid type concentrates. It reduces mineral scale build up and the possibility of premature corrosion of the cooling system. It also lowers the possibility of a chemical reaction between the coolant, water and materials used in the radiator.
Demineralised Water can be used as a straight top up in cooling systems where the appropriate coolant is not available, although this will reduce the coolants concentration level and can alter the coolant performance. If used as top up, it is recommended that the coolant also be topped to the correct concentration level.
(Penrite recommend using Penrite OEM Approved Coolants for optimum performance, protection and longevity of the coolant and the cooling system).
Demineralised Water can also be used in lead acid batteries as the reduction in mineral and salt ions that are commonly found in tank and tap water can drastically shorten the lifespan of a lead-acid battery. Effects of not using demineralised water are corrosion of the positive plate and mineral contaminates in the electrolyte solution which can effect metallic components and hence a loss in performance.
Demineralised Water can also be used in many other applications such as steam irons, aquariums, autoclaves, laboratory, laser cutting and many more. It is also ideal for watering indoor and delicate plants as it will not cause a build-up of minerals in the soil.
Redline Water Wetter 12 oz
Regular price $21.95 Save $-21.95Unique agent for cooling systems that doubles the wetting ability of water
Rust and corrosion protection allows for use of straight water in racing or reduced antifreeze levels in warm climates
Improves heat transfer and reduces cylinder head temperature
Use one bottle for most passenger cars and light trucks, treats 3 to 5 gallons or 13.2 to 15.9 liters, vehicles with larger cooling systems should use two bottles, small cooling systems should use 1oz (3 to 4 capfuls) per quart
Compatible with new or used antifreeze (including DEX-COOL® and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems
Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes
Contains no ethylene glycol
Â
Penrite 350,000 KM Green Coolant Concentrate 5L
Regular price $59.95 Save $-59.95350,000 KM Green Coolant Concentrate is a Type "A" anti-freeze/anti-boil, silicate, phosphate and amine free cooIant, safe for all types of light and heavy duty vehicles. It uses a technically advanced HYBRID (HOAT - Hybrid Organic Acid Technology) inhibitor formulation which provides a stable long life coolant that prevents rust, corrosion, cavitation and degradation of the cooling system. It is available in concentrate and premix forms.
APPLICATION
350,000 KM Green Coolant is suitable for passenger cars, 4WDs, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment It can be used in Australian, European, Asian and US vehicles who specify a Hybrid (HOAT) type anti- freeze anti boil coolant.
350,000 KM Green Coolant is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel and industrial engines where Type A anti-freeze / anti-boil and anti-corrosion properties are required. It provides long-term protection against rust and corrosion for all materials used in the engine and in the cooling system. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics. It is effective in all cast iron and aluminium engines that are under load or used in extreme hot and cold climates.
350,000 KM Green Coolant may be used in all types of vehicles that use green, blue or yellow coloured initial fill coolants. It is also ideal for motorcycles.
350,000 KM Green Coolant should be used at a concentration level of between 33% and 50%. We recommend using Penrite De-Mineralised Water when mixing although the phosphate free formulation allows it to be mixed with normal tap water if necessary.
DEMINERALISED WATER
When mixing coolants, Penrite recommend mixing at the manufacturers recommended concentration levels with Penrite De-Mineralised Water
DOSE RATE - FREEZING POINT BOILING POINT
Mix Ratio 33% 50%
Freezing Point -18°C -38°C
Boiling Point +104°C +109°
SERVICE INTERVALS
When used as indicated and correctly maintained
Passenger Cars, 4WD, Light Commercial 350,000 KM
Heavy Duty On Highway 350,000 KM
Heavy Duty Off Highway 5,000 Hours
PLEASE NOTE: 350,000 Green Coolant Replaces 3 Year Standard Drain Anti Freeze Anti Boil Coolant
- 350,000km drain intervals if used and maintained between 33% & 50%
- Meets with many manufacturer specifications
- Compatible with all plastics, rubbers and seals
- Protects all internal surfaces from corrosion, including aluminium
- Phosphate free formulation allows use with hard water
- Silicate and Amine free
- Suitable for Asian vehicles specifying non- silicate coolant
Penrite 350,000 KM Green Coolant Pre Mix 5L
Regular price $27.95 Save $-27.95350,000 KM Green Coolant Premix is a, Type A anti-freeze/anti-boil, silicate, phosphate and amine free cooIant, safe for all types of light and heavy duty vehicles. Its uses a technically advanced HYBRID (HOAT - Hybrid Organic Acid Technology) inhibitor formulation which provides a stable long life coolant that prevents rust, corrosion, cavitation and degradation of the cooling system. It is available in concentrate and premix forms.
350,000KM Coolant Premix is mixed at a 33% concentration level.
APPLICATION
350,000 KM Green Coolant Premix is suitable for passenger cars, 4WDs, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment It can be used in Australian, European, Asian and US vehicles who specify a Hybrid (HOAT) type anti- freeze anti boil coolant.
350,000 KM Green Coolant Premix is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel and industrial engines where Type A anti-freeze / anti-boil and anti-corrosion properties are required. It provides long-term protection against rust and corrosion for all materials used in the engine and in the cooling system. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics. It is effective in all cast iron and aluminium engines that are under load or used in extreme hot and cold climates.
350,000 KM Green Coolant Premix may be used in all types of vehicles that use green, blue or yellow coloured initial fill coolants. It is also ideal for motorcycles.
350,000 KM Green Coolant Premix is a 33% concentration formulation and is ready to use directly from the container. It is pre-mixed with Penrite De-Mineralised Water and can be poured directly into the cooling system. No further dilution is required. It can be used as a complete service refill, top up and is safe to mix with compatible Type A coolants.
DOSE RATE - FREEZING POINT BOILING POINT
Mix Ratio 33% 50%
Freezing Point -18°C -38°C
Boiling Point +104°C +109°
SERVICE INTERVALS
When used as indicated and correctly maintained
Passenger Cars, 4WD, Light Commercial 350,000 KM
Heavy Duty On Highway 350,000 KM
Heavy Duty Off Highway 5,000 Hours
- 350,000km drain intervals if used and maintained between 33% & 50%
- Meets with many manufacturer' specifications
- Compatible with all plastics, rubbers and seals
- Protects all internal surfaces from corrosion, including aluminium
- Phosphate free formulation allows use with hard water
- Silicate and Amine free
- Suitable for Asian vehicles specifying non- silicate coolant
Penrite Green OEM Coolant Concentrate 5L
Regular price $69.95 Save $-69.95Green OEM Coolant Concentrate is a GENUINE GLYSANTIN® G48®, Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved, Type "A" Ethylene glycol, Anti-Freeze Anti-Boil cooIant as used in initial manufacturer factory fills. It uses a technically advanced HYBRID (HOAT - Hybrid Organic Acid Technology) based inhibitor system that is Phosphate, Amine and Nitrite free. The extended long life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system for 8 years or 500,000km. It is available in both concentrate and premix formulations.
PLEASE NOTE: Green OEM Coolant Concentrate replaces 7 Year Green Coolant concentrate and 4 Year Long Drain Anti Freeze Anti Boil Coolant
APPLICATION
Green OEM Coolant Concentrate is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel and industrial engines where Hybrid (HOAT) type anti-freeze / anti-boil and anti-corrosion properties are required.
Green OEM Coolant Concentrate is suitable for passenger cars, 4WD's, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment. It is especially suited to vehicles of European origin such as Audi / VW (G11), BMW, Mercedes, Porsche (Pre-1995), Volvo, Opel & Saab, but it may be used in all types of vehicles.
Green OEM Coolant Concentrate provides long-term protection against rust and corrosion for all materials used in the engine and in the cooling system construction. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics used for the cooling system construction. It is effective in all cast iron aluminium engines that are under load or used in extreme hot and cold climates.
Green OEM Coolant Concentrate may be used in all types of vehicles that use green, blue or yellow coloured initial fill coolants and it is also suitable for use in out of warranty service to maintain OEM performance. It is also ideal for motorcycles.
Green OEM Coolant Concentrate should be used at a concentration level of 50%. We recommend using Penrite De-Mineralised Water when mixing although the phosphate free formulation allows it to be mixed with normal tap water if necessary.
DOSE RATE - FREEZING POINT BOILING POINT
Penrite recommend mixing at the manufacturers recommended concentration levels.
Mix Ratio 33% 50%
Freezing Point -18°C -38°C
Boiling Point +104°C +109°C
- 8 Year 500,000km drain intervals if used and maintained at 50%
- OEM Approved to maintain manufacturer’s warranty & specifications
- Protects all internal surfaces from corrosion
- Phosphate free formulation allows hard water use
- Nitrite and amine free
DEMINERALISED WATER
When mixing coolants, Penrite recommend mixing at the manufacturers recommended concentration levels with Penrite De-Mineralised Water
Penrite Blue OEM Coolant Concentrate 5L
Regular price $76.95 Save $-76.95Blue OEM Coolant Concentrate is a GENUINE GLYSANTIN® G30® Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved, Type "A" Ethylene glycol, Anti-Freeze Anti-Boil cooIant as used in initial manufacturer factory fills. It uses a technically advanced OAT (Organic Acid Technology) based inhibitor system that is Silicate, Phosphate, Amine, Borate and Nitrite free. The extended long life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system for 8 years or 500,000km.
PLEASE NOTE: Blue OEM Coolant Concentrate replaces 7 Year 450,000 KM Blue Coolant Concentrate
APPLICATION
Blue OEM Coolant Concentrate is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel and industrial engines where an OAT type anti-freeze / anti-boil and anti-corrosion properties are required.
Blue OEM Coolant Concentrate Coolant is suitable for passenger cars, 4WD's, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment. It is suitable for use with Australian, European, Asian & US vehicles It is Silicate, Borate and Phosphate Free making it particularly suitable for both European & Japanese vehicles that use blue coloured coolant such as Nissan, Subaru & Suzuki.
Blue OEM Coolant Concentrate provides long-term protection against rust and corrosion for all materials used in the engine and in the cooling system construction. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics used in the cooling system. It is particularly effective in all cast aluminium engines that are under load or used in extreme hot and cold climates. It may be used in all types of vehicles that use blue coloured initial fill coolants and it is also suitable for use in out of warranty service to maintain OEM performance. It is also ideal for motorcycles.
Blue OEM Coolant Concentrate should be used at a concentration level of 50% for maximum inhibitor life and anti-freeze & anti-boil protection. We recommend using Penrite De-Mineralised Water when mixing although the phosphate free formulation allows it to be mixed with normal tap water if necessary.
Blue OEM Coolant is also available as a 50% concentration formulation that is ready to use and requires no mixing.
Penrite Radiator Flush effectively cleans the system in 7 minutes and prepares the cooling system for new coolant.
DOSE RATE - FREEZING POINT BOILING POINT
Penrite recommend mixing at the manufacturers recommended concentration levels.
Mix Ratio 33% 50%
Freezing Point -18°C -38°C
Boiling Point +104°C +109°C
- 8 Year 500,000km drain intervals if used and maintained at 50%
- OEM Approved to maintain manufacturer’s warranty & specifications
- Compatible with plastics, rubbers and seals.
- Protects all internal surfaces from corrosion, including aluminium.
- Phosphate free formulation allows use with hard water.
- Silicate, Nitrite, Nitrate and amine free.
DEMINERALISED WATER
When mixing coolants, Penrite recommend mixing at the manufacturers recommended concentration levels with Penrite De-Mineralised Water
Penrite Radiator Flush 500ml
Regular price $14.95 Save $-14.95Radiator Flush is a fast acting (7 Minute), alkaline cooling system cleaner designed to remove rust, scale and other deposits from automotive cooling systems that could block or foul circulation of coolant though the radiator or engine.
APPLICATION
Radiator Flush is recommended to clean out the cooling system of all types of passenger cars, 4WD's, light & heavy duty commercial vehicles, motorcycles, agriculture, mining, construction and stationary engines.
Radiator Flush is designed to be used prior to new coolant being added to the vehicles cooling system as this will ensure the cooling system is free from rust, scale or any other residue which could block or foul the cooling system and prevent the new coolant from functioning as intended. It will also neutralise any leftover coolant remaining in the engine eliminating compatibility issues if changing coolant types.
Radiator Flush can also be used where any type of coolant has been present in the cooling system and is harmless to all metals, rubber, plastic and seals.Â
- 1 bottle treats up to 15 Litres capacity
- Fast acting, cleans in 7 minutes
- Removes internal rust & corrosion
- Improves cooling system circulation
- Harmless to all metals, rubber & water pump seals
- Compatible with all types of coolants
- Improves cooling system performance
- Non-acidic formulation
INSTRUCTIONS FOR USE
Use 1 bottle for up to 15 Litres capacity
- Drain Cooling System
- Refill radiator with clean water
- Add Radiator Flush to cooling system
- Start Engine and turn on heater
- Run engine for 10 - 15 minutes, this includes 7 minutes cleaning time
- Turn off engine, allow to cool
- Drain cooling system
- Refill with appropriate Penrite Coolant