Impreza WRX & STI 06-07

 OE Style Replacement Radiator for the 2003-07 Impreza WRX (Blob & Hawk Eye)

Core Height (mm) 340
Core Width (mm) 686
Core Thickness (mm) 25

If unsure please confirm fitment with VIN Number

Genuine Subaru AC Idler Pulley #73131FC000

*If Unsure Please Confirm With VIN Number*

Genuine Subaru Spark Plug

NGK BKR6E-11

Price is Per Plug

4x Required Per Car

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

Specifications:

• Diameter 294 mm
• Height 57 mm 
• Thickness 24 mm 
• Min Thickness 22 mm
• Inner Diameter 58 mm
• Number of Holes 5
• Pitch Circle Ø 100 mm

 Suits:

• 99-14 Impreza WRX 
• 03-13 Forester 
• 04-09 Liberty
• 98-15 Outback
• 12-18 BRZ/86 

Please measure factory discs and compare with the specifications above to confirm fitment.

  Price is per disc, 2 required per vehicle

Direct Fit High-Output 300L/H Replacement Ethanol Friendly Fuel Pump

A true ethanol and petroleum friendly replacement fuel pump with flow/pressure capabilities to deliver fuel for up to 280kw at the wheels.

We recommend a Boxer Performance Parts In-Tank Fitting Kit for MY94-MY07 Impreza, WRX, STI, Forester + MY94-MY03 Liberty, Outback.

Note: Our High-Output Fuel Pumps do not have a check valve, therefore slightly longer ‘cranking’ periods are experience before the engine ‘fires-up’, this is a positive side-effect for engine longevity.

Raceworks One Way Check Valve

SUPPORTS 600+ HORSEPOWER AT 40 PSI 13.5V

GSS 39MM Fuel Pump Family Design Update: Generation 3 (G3)

Walbro / TI Automotive has made pump outlet updates to our popular line of 255LPH 39MM Gerotor fuel pumps. The new outlet design is engineered to improve fitting robustness while maintaining the current electrical connection configuration. The update retains our proven pump technology and these third generation pumps will continue to be manufactured in the Caro, MI plant. With the updated outlet design, we will be superseding the current GSS340, GSS341, and GSS342 pumps.

Walbro / TI Automotive GSS350G3, GSS351G3, GSS352G3 Fuel Pumps 600+ horsepower!

Walbro / TI Automotive's new GSS fuel pumps are lapping the field with increased flow rates of 350 lph. Our proven, robust gerotor technology is inside every 39mm straightwall GSS 350, perfect for forced induction (turbocharged and supercharged) applications. We've launched three 350 lph pump versions giving you multiple options to fuel your adrenaline because fast matters!

Features:

• 350 LPH / 90 GPH RATED AT 40PSI 13.5V
• Features an upgraded outlet design with improved one piece construction
• Fuel: Gas
• OE quality
• 39mm diameter
• Easily mountable to new or existing in-tank hangers
• Positive displacement for robust performance
• Manufactured in TI Automotive's Caro, Michigan plant - Made In USA.

What's Included:

• 1 x GSS352 Fuel Pump Only
• 1 x Installation Fitting Kit

 IHI VF48L/Stage 2 Turbo Single Scroll

With an upgraded compressor wheel and reinforced bearings, capable for an added extra 20-30kw over the stock VF48.

Tuning Notes:

Because this upgraded solenoid affects the way that your vehicle controls boost, it is always recommended that you consult with a tuner immediately following installation. It is not recommended that you drive the car in a way that builds boost without doing so. If you have any questions, don't hesitate to get in touch with us directly!

Suits:

• 01-07 WRX & STI

*Note: Older vehicles from 2001-2007 may experience diffuculty with tuning if using stock 16-Bit ECU. Check with your tuner that this product is right for you before purchasing*

Omni Power USA 3, 4 & 5 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.

Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA 4 Bar MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.

With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage. 

Key features:

• Cases are designed to withstand in excess of 130 PSI without leaking
• -40 to 260 degrees Fahrenheit temperature operating range
• Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).
• Automatic temperature compensation.
• True linear scaling for perfect drivability at all boost and vacuum levels.
• Compatible with all aftermarket engine management systems.
• Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.
• Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.
• Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.
• Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.

*Please note vehicle will require tuning after installation*

Applications: Subaru WRX 2001-2014 / STi 01+

Designed to provide a direct plug and play solution for the Hella Super Tones.

Installs in minutes

No cutting or soldering required

Eliminates the need for the relay supplied by Hella

Protective sleeves for increased longevity

• Thread M14 x 1.25
• Reach 26.5
• Hex Size 16
• Resisted Yes
• Gap .8mm

Project Mu Hyper Carbon +

Project MU HC is a premium Performance Street and Rally brake pad. HC has more bite than both NS and B-Spec and has excellent fade resistance. Capable of operating at temperatures up to 800°c, this pad will handle almost all serious braking conditions. 
HC is a genuine ‘cross over’ pad suitable for both road and track Use. HC is extremely capable in competition environments so use this pad if you are involved in serious track day, rally and hill climb. 
Along with temperature capabilities, HC is renowned as a ‘drivers pad’ with unmatched driver feel and control.

Friction Co Efficient .38-.62

Temperature Range 0-800°

Compound Hyper Carbon

Suits:

• 99-2007 Subaru WRX GD (2-Piston)

Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

Project Mu Hyper Carbon +

Project MU HC is a premium Performance Street and Rally brake pad. HC has more bite than both NS and B-Spec and has excellent fade resistance. Capable of operating at temperatures up to 800°c, this pad will handle almost all serious braking conditions. 
HC is a genuine ‘cross over’ pad suitable for both road and track Use. HC is extremely capable in competition environments so use this pad if you are involved in serious track day, rally and hill climb. 
Along with temperature capabilities, HC is renowned as a ‘drivers pad’ with unmatched driver feel and control.

Friction Co Efficient .38-.62

Temperature Range 0-800°

Compound Hyper Carbon

Suits:

• 1999-2000 Subaru STI GC8 (4-Piston)
• 2001-2007 Subaru WRX GD (4-Piston)
• 2003-2007 Subaru Forester SG (4-Piston)**

**SG Forester has two possible caliper options either 4-Piston DB1170 or 2-Piston DB1491. Check pad shapes to confirm correct pad for your model.

Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

Friction Co Efficient .38-.62

Temperature Range 0-800°

Compound Hyper Carbon

Suits:

• 01-17 STI (2-Piston Brembo)

Please confirm pad shape by comparing existing pad against the blueprint in the second photo.