Liberty Inc GT 04-09 (BL, BP)

Genuine Subaru Bottom Radiator Hose

Suits:

• 08-14 Impreza WRX & STI
• 08-11 Impreza
• 15-20 WRX STI
• 09-10 Forester Non Turbo
• 09-12 XT Forester 
• 04-09 Liberty/Outback

*If Unsure Please Confirm With VIN Number*

Genuine Subaru Sump Pan Oil Seal

Genuine Subaru Water Pump Seal #21116AA010

*If Unsure Please Confirm With VIN Number*

Genuine Subaru Lower Ball Joint 

Genuine Subaru Camshaft Oil Seal with AVCS (Active Valve Control System)

1x Per Camshaft Required

Genuine Subaru AC Idler Pulley Shaft 

*If Unsure Please Confirm With VIN Number*

Torque Solution turbo Oil feed Line kit for Subaru EJ stock location configurations. The OEM oil feed hard lines are fragile and are easily damaged when swapping or working on your turbo. Our kit converts the hard lines to stainless steel braided -4an lines w/ T Fitting and provides all the necessary banjo fittings / copper washers to complete the job.

Features:

• -4an Stainless Steel Teflon Lines
• Zinc Coated Hardware for Corrosion Resistance
• Limited Lifetime Warranty

Fits:

• 2006-2014 WRX (EJ255)
• 2006-2020 STI (EJ257)
• 2003-2012 Forester XT (EJ255)
• 2007-2009 Liberty GT (EJ255)

Koyorad OE Replacement Radiator 06-09 GT Liberty EJ25 (BL)

If unsure please confirm fitment with VIN Number

Genuine Subaru Spark Plug

NGK SILFR6A

Price is Per Plug

4x Required Per Car

• 07-09 GT Liberty
  
• 09-12 XT Forester
• 08-14 Impreza WRX & STI
• 15-20 STI

*If Unsure Please Confirm With VIN Number*

Genuine Subaru Spark Plug

 NGK ILFR6B

Price is Per Plug

4x Required Per Car

• 06-07 Liberty Non Turbo
• 04-06 GT Liberty
• 04-08 XT Forester
• 06-07 Impreza WRX

*If Unsure Please Confirm With VIN Number*

Direct Fit High-Output 300L/H Replacement Ethanol Friendly Fuel Pump

A true ethanol and petroleum friendly replacement fuel pump with flow/pressure capabilities to deliver fuel for up to 280kw at the wheels.

We recommend a Boxer Performance Parts In-Tank Fitting Kit for MY94-MY07 Impreza, WRX, STI, Forester + MY94-MY03 Liberty, Outback.

Note: Our High-Output Fuel Pumps do not have a check valve, therefore slightly longer ‘cranking’ periods are experience before the engine ‘fires-up’, this is a positive side-effect for engine longevity.

Raceworks One Way Check Valve

MAC valves are used world-wide by many industry leading motorsport brands and workshops and is a brand you can trust.

Mac 35 Series Valve

The MAC 35 series is a direct solenoid operated 3-way poppet valve.  It features a short stroke solenoid, a balanced poppet and powerful return spring.  These features translate into high shifting forces, fast consistent response times, and long life.  Our unique balanced design means virsatility in piping – the valve can be configured as a 3-way or 2-way – normally closed or normally open or can be used for vacuum, divertor or selector applications. 

Features:

• Genuine MAC Solenoid Operated 3-Way Valve
• Turbosmart Silicone Vacuum Hose
• Nickel-Plated Barb Fittings
• Vehicle Specific Black Finish Bracket
• Vehicle Specific Plug-and-Play Wiring Harness

Tuning Notes:

Because this upgraded solenoid affects the way that your vehicle controls boost, it is always recommended that you consult with a tuner immediately following installation. It is not recommended that you drive the car in a way that builds boost without doing so. If you have any questions, don't hesitate to get in touch with us directly!

Suits:

• 08-14 Subaru WRX
• 08-12 Subaru Forester XT SH
• 04-09 Subaru Liberty GT BL/BP

Omni Power USA 3, 4 & 5 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.

Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA 4 Bar MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.

With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage.

Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.

 Key features:

• Cases are designed to withstand in excess of 130 PSI without leaking
• -40 to 260 degrees Fahrenheit temperature operating range
• Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).
• Automatic temperature compensation.
• True linear scaling for perfect drivability at all boost and vacuum levels.
• Compatible with all aftermarket engine management systems.
• Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.
• Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.
• Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.
• Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.

*Please note vehicle will require tuning after installation*

MAC 35 series are the go-to solenoid valve for automotive boost control due to their exceptionally rugged and reliable design. Features waterproof female connector, 1/8″ BSP threads, and includes two 7mm hose tails.

Tuning Notes:

Because this upgraded solenoid affects the way that your vehicle controls boost, it is always recommended that you consult with a tuner immediately following installation. It is not recommended that you drive the car in a way that builds boost without doing so. If you have any questions, don't hesitate to get in touch with us directly!

Suits:

• All Turbo Subaru Models

• Ceramic Stealth Advanced Technology for whisper quiet braking, silky smooth operation, noticeably less dust.
• Noise Absorbing Shims for reduced transmission of vibration and noise from the brake pad during extreme braking.

Suits:

Koyorad OE Replacement Radiator 04-07 NA Liberty EJ25/EJ20 (BL)

If unsure please confirm fitment with VIN Number

Genuine Subaru AC Idler Pulley #73131FC000

*If Unsure Please Confirm With VIN Number*

Genuine Subaru Spark Plug

NGK BKR6E-11

Price is Per Plug

4x Required Per Car

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

Specifications:

• Diameter 294 mm
• Height 57 mm 
• Thickness 24 mm 
• Min Thickness 22 mm
• Inner Diameter 58 mm
• Number of Holes 5
• Pitch Circle Ø 100 mm

 Suits:

• 99-14 Impreza WRX 
• 03-13 Forester 
• 04-09 Liberty
• 98-15 Outback
• 12-18 BRZ/86 

Please measure factory discs and compare with the specifications above to confirm fitment.

  Price is per disc, 2 required per vehicle

SUPPORTS 600+ HORSEPOWER AT 40 PSI 13.5V

GSS 39MM Fuel Pump Family Design Update: Generation 3 (G3)

Walbro / TI Automotive has made pump outlet updates to our popular line of 255LPH 39MM Gerotor fuel pumps. The new outlet design is engineered to improve fitting robustness while maintaining the current electrical connection configuration. The update retains our proven pump technology and these third generation pumps will continue to be manufactured in the Caro, MI plant. With the updated outlet design, we will be superseding the current GSS340, GSS341, and GSS342 pumps.

Walbro / TI Automotive GSS350G3, GSS351G3, GSS352G3 Fuel Pumps 600+ horsepower!

Walbro / TI Automotive's new GSS fuel pumps are lapping the field with increased flow rates of 350 lph. Our proven, robust gerotor technology is inside every 39mm straightwall GSS 350, perfect for forced induction (turbocharged and supercharged) applications. We've launched three 350 lph pump versions giving you multiple options to fuel your adrenaline because fast matters!

Features:

• 350 LPH / 90 GPH RATED AT 40PSI 13.5V
• Features an upgraded outlet design with improved one piece construction
• Fuel: Gas
• OE quality
• 39mm diameter
• Easily mountable to new or existing in-tank hangers
• Positive displacement for robust performance
• Manufactured in TI Automotive's Caro, Michigan plant - Made In USA.

What's Included:

• 1 x GSS352 Fuel Pump Only
• 1 x Installation Fitting Kit