Most Popular

Genuine Subaru Timing Belt Kit

Kit Contains:

• 13028AA231    Timing Belt
  
• 13033AA042    Hydraulic Tensioner
  
• 13073AA190    Smooth Lipped Idler
  
• 13073AA142    Smooth Idler
  
• 13085AA080    Toothed Idler
• 806733030       Crankshaft Seal

Suits:

• 99-13 Liberty Non Turbo SOHC
  
• 99-10 Forester Non Turbo SOHC
• 99-05 Impreza Non Turbo SOHC 

*If Unsure Please Confirm With VIN Number*

Genuine Subaru Spark Plug

NGK BKR6E-11

Price is Per Plug

4x Required Per Car

Genuine Subaru Front Sway Bar Link

2x Required - Sold as a Single

Extreme High-Output Ethanol Friendly Fuel Pump

A true ethanol and petroleum friendly fuel pump with flow/pressure capabilities to deliver fuel for up to 350kw at the wheels.

Note: Modifications to the factory fuel pump carrier bracket or module are required.

Our Extreme High-Output Fuel Pumps do not have a check valve, therefore slightly longer ‘cranking’ periods are experience before the engine ‘fires-up’, this is a positive side-effect for engine longevity.

You can also choose to add a one way check valve if you prefer:

Raceworks One Way Check Valve

Note: In place of the BR540 on its own we recommend a Boxer Performance Parts 700HP Subaru Fuel Pump Module for MY08-MY14 WRX, MY08-MY20 STI, MY08-MY13 XT Forester, MY04-MY10 GT Liberty.

Genuine Subaru VF48 Turbo Single Scroll 

Unlike the factory solenoid,this 3-Port Solenoid allows you to raise the factory boost levels with more response and adding more control.

With this solenoid no boost pressure is allowed through to the actuator so no premature boost can occur. The 3-Port Solenoid allows lower wastegate duty cycle to produce higher boost pressures with much greater control,thereby allowing tuners more “headroom” and “space” when modifying high horsepower turbo vehicles.

The kit includes the 3-Port Boost Control Solenoid and harness for plug and play install with Subaru models. We recommend using it only with hoses of the highest quality.

Tuning Notes:

Because this upgraded solenoid affects the way that your vehicle controls boost, it is always recommended that you consult with a tuner immediately following installation. It is not recommended that you drive the car in a way that builds boost without doing so. If you have any questions, don't hesitate to get in touch with us directly!

Suits:

• All Turbo Subaru Models

PSR all stainless steel single scroll equal length exhaust manifolds for new age WRX STI. Lost wax finished with TIG welding & machine bended pipes. Stable & effective connection by the slip joint bracket and air leakage avoided by the 3 bolts flange design up-pipe.

Contents of Kit:
• Exhaust Manifold
• Up Pipe
• Turbo Gaskets
• Hardware Kits

*Use of the equal length headers on a EJ20 (2.0L) requires a 2.5L Sump, Pick Up & Baffle Plate*

The Invidia Catted Downpipe features a Open Mouth Bellmouth with a 100cell Cat at the top of the down pipe. Designed in Australia

Invidia's all new Australian Spec downpipe is a great way to start getting performance HP and Torque.

The Invidia downpipe is constructed of 304 stainless steel tubing to ensure longevity while enhancing power by freeing exhaust flow. 3" mandrel bent piping will bolt up to any stock replacement catback or stock unit.

The Australian Designed Stainless Cast Head ensures perfect flow. 

No steering knuckle is required with the Aus Spec Down Pipe

The Invidia Downpipe features a Open Mouth Bellmouth. Designed in Australia
Invidia's all new Australian Spec downpipe is a great way to start getting performance HP and Torque.

The Invidia downpipe is constructed of 304 stainless steel tubing to ensure longevity while enhancing power by freeing exhaust flow. 3" mandrel bent piping will bolt up to any stock replacement catback or stock unit.

Invidia Q300 tuned muffler exhaust systems offer a rich exhaust note which enhances the natural tone of your car's engine. Invidia's high flow design ensures efficient exhaust flow for optimum engine performance.

Includes:

• Catted Down Pipe

The Invidia N1 single tip turbo back exhaust suit the 01-07 WRX/STI titanium tip.

Includes

• Choice of Catless or Catted Down Pipe

Inlet manifold pollution is the enemy of any high performance engine, particularly turbocharged high efficiency engines that make up the majority of current performance cars.

To counter this Process West have developed the SEPR8R, an advanced catch can system for your high performance engine that uses state of the art industrial filtration methods and integrates them into a seamless and properly engineered product

The SEPR8R comes as a complete bolt on generic fit kit easily adapted to any performance engine bay. With the SEPR8R kit you will receive the billet aluminium catch can with internal filtration system, a precision bracket to bolt into your engine bay, hoses to route the gasses, along with the required clamps and mounting hardware. This is a simple DIY application.

TERRATUFF SEPR8R offers the following features

• Manufactured from Billet Aluminium with removable lid and filtration assembly of 650ml capacity
• Over Pressure relief valve incorporated to prevent system malfunction in the case of blockage
• Drain port incorporated into main housing with optional drain valve available
• Unique Polyurethane filtration system that is anti-clog and also washable/reusable with low restriction and 4um filtering
• Laser cut bracket specifically designed for each vehicle
• Moulded temperature resistance houses shaped for the engine bay of each vehicle
• High quality clamps and mounting hardware
• Installation instructions included

Details:

• Billet Aluminium Construction
• High Flow Internal Filter System
• Moulded hoses for perfect fitment

The Process West Cold Air Intake is perfect for gaining more power from your EJ Subaru, not to mention the sound!

The Cold Air Intake Kit is designed to replace the factory air intake and allow for a less restrictive airflow. Made of lightweight CNC mandrel bent aluminum tubing with a airflow meter mount machined on which enables you to utilise the standard airflow meter.

Process West also provide a K&N high flow air filter with all the Cold Air Intake Systems they sell.

Finished off with a flawless black coating for a factory look.

The Process West Cold Air Intake is perfect for gaining more power from your EJ Subaru, not to mention the sound!

The Cold Air Intake Kit is designed to replace the factory air intake and allow for a less restrictive airflow. Made of lightweight CNC mandrel bent aluminum tubing with a airflow meter mount machined on which ables you to utilise the standard airflow meter. Process West also provide a K&N high flow air filter with all the Cold Air Intake Systems they sell.

Finished off with a flawless Black coating for a factory look.

Details:

Invidia N1 Exhaust Systems feature a cannon style muffler for maximum flow and minimised back pressure, resulting in significant mid to top end power gains.

Invidia N1 exhaust systems feature a large diameter burned titanium tip for an aggressive look.

Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 3 point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

• 1 Sway Bar
• 2 Bushings
• Install Guide

Suits:

• 03-07 Impreza WRX STI