Impreza WRX & STI 06-07

Have you recently painted your calipers? Need new stickers? Look no further!

If you would like a custom vinyl colour fill out the form below!

https://www.boxerperformanceparts.com.au/pages/custom-order-request 

Kit Contains:

 IHI VF48L/Stage 2 Turbo Single Scroll

With an upgraded compressor wheel and reinforced bearings, capable for an added extra 20-30kw over the stock VF48.

Cylinder 4 cooling has long been a known issue on the EJ Family of Subaru engines. The nature of the water passageways around this area means a lack of cooling can lead to an increase in the temperatures around this cylinder.

RCM's simple solution to this problem lies in our easy to fit complete kit. Billet fittings are banded in place on our custom 90 degree Samco silicon hose, which you simply fit into the unused port at the back of the block at cylinder 4's location. This is then tee'd into the water matrix pipe directly above using the supplied HiGrip stainless steel fittings. The billet barb fitting is of the correct diameter to allow the right flow rate around cylinder 4 to cool without over cooling, and the 90 degree pre-formed Samco hose ensures that this flow is maintained without disturbance from potential kinks in the pipework.

Suits all EJ Engines

New aluminum filler cap cover to brighten up the engine bay!

The Mishimoto Silicone Ancillary Hose Kit for Subaru WRX/WRX STI is made from a combination of high-grade silicone and heat-resistant embedded fibres for a high-quality replacement for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style. Will fit 2.5L turbo motors only.

Features:

• Direct fit for 2006–2007 Subaru WRX and WRX STI
• Max temperature of 330°F
• Made of high grade silicone and heat-resistant embedded fibres
• Efficiently reduces heat
• Increases pressure tolerance
• OEM replacement fit
• Available in black, blue, or red
• Mishimoto Lifetime Warranty

Product Includes:

• 7 Silicone Hoses
• Mishimoto Lifetime Warranty

Specifications:

• Material: Silicone
• Exterior Material: Silicone
• Interior Material: Heat-Resistant Embedded Fibers
• Max Temp: 330°F (165°C)

Note: Some hoses may not be used on STI models

Tuning Notes:

Because this upgraded solenoid affects the way that your vehicle controls boost, it is always recommended that you consult with a tuner immediately following installation. It is not recommended that you drive the car in a way that builds boost without doing so. If you have any questions, don't hesitate to get in touch with us directly!

Suits:

• 01-07 WRX & STI

*Note: Older vehicles from 2001-2007 may experience diffuculty with tuning if using stock 16-Bit ECU. Check with your tuner that this product is right for you before purchasing*

Omni Power USA 3, 4 & 5 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.

Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA 4 Bar MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.

With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage. 

Key features:

• Cases are designed to withstand in excess of 130 PSI without leaking
• -40 to 260 degrees Fahrenheit temperature operating range
• Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).
• Automatic temperature compensation.
• True linear scaling for perfect drivability at all boost and vacuum levels.
• Compatible with all aftermarket engine management systems.
• Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.
• Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.
• Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.
• Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.

*Please note vehicle will require tuning after installation*

Invidia N1 Exhaust Systems feature a cannon style muffler for maximum flow and minimised back pressure, resulting in significant mid to top end power gains.

Invidia N1 exhaust systems feature a large diameter signature black for an aggressive look.

Applications: Subaru WRX 2001-2014 / STi 01+

GoodRidge Stainless Steel Clutch Line. This is an excellent OEM replacement that helps promote a quicker response from the pedal to the clutch for improved performance. 

Here are the details:

• PTFE inner hose covered by braided stainless steel
• External Teflon coating
• Won't expand under pressure 
• Delivers immediate pressure from the brake pedal to the clutch slave cylinder for a faster response
• Comes with a new banjo bolt, copper o-rings, and c-clip

Hella Horns are known worldwide for being the loudest and most attractive looking Subaru aftermarket horns available. They deliver a high quality sound with OEM fitment. Trust Hella Horns for the ultimate in aftermarket WRX horns! This is for a REAL pair of YELLOW Hella Horns! If you are looking for LOUD horns that look great behind a grill this IS the kit you are looking for!

HELLA Sharp Tone Benefits:

• Sharp penetrating tone
• Robust premium look with distinctive yellow grille
• Ideal for rugged off-road usage
• Corrosion and water-spray resistant

Hella Sharp Tone Horn Features

• Power Consumption: 2 x 42W
• Frequency: 415 Hz (high tone) & 350 Hz (low tone)
• Acoustic Pressure: 115 dB(A)
• Nominal Voltage: 12V

Plug and Play harness

Designed to provide a direct plug and play solution for the Hella Super Tones.

Installs in minutes

No cutting or soldering required

Eliminates the need for the relay supplied by Hella

Protective sleeves for increased longevity

The PSR Hella Brackets come with slotted mounting points for horn assemblies. These allow for fine-tuning of the position of horns to work with unique setups. By offering multiple mounting points, the connection between the radiator support and bracket is solidified and reduces unwanted flex under all driving conditions.