Most Popular

Here you are looking at a foldable storage container featuring the iconic STI Logo. Made from a durable plastic, these containers are perfect for storing or transporting your tools, consumables or anything else you need and can be folded neatly when not in use. Locking tabs are included to lock the lid closed and the containers are perfectly stackable, even when mixing sizes.

Available in Black or the Iconic Subaru STI "Cherry" Pink colours, be sure to grab one of these before they sell out.

20L Box Features:

• Material: Plastic
• Assembled Size: 380 × 305 × 237mm,
• Folded Size: 380 × 305 × 83mm
• capacity: 20.8L
• Weight: ~1.27kg
• Compressive load: 4.51kN (460kgf)
• Storage load: about 12 ~ 13kg
• Made in Japan

50L Box Features:

• Material: Plastic
• Assembled Size: 530 × 366 × 334mm,
• Folded Size: 530 × 366 × 95mm
• capacity: 50.1L
• Weight: ~2.65kg
• Compressive load: 6.59kN (670kgf)
• Storage load: about 15 ~ 16kg
• Made in Japan

The Process West Engine Cover Garnish is finished in an attractive and durable wrinkle coat. Available in both red or black its a great alternative to the standard dull cover.

This part is supplied with all the fixings to complete the job.

Details:

• Fits in factory location
• Supplied with all necessary parts to complete the install
• Available in Red or Black wrinkle coat finish

Super Dot 4 Brake Fluid is a premium quality, non-silicone, non-mineral/petroleum based, fully synthetic brake fluid designed for use in a wide range of brake and clutch applications

Super Dot 4 Brake Fluid is recommended for re-fill or top-up of brake and clutch systems in passenger cars, 4WD's, motorcycles, light and heavy duty commercial vehicles, mining, construction and agricultural equipment that require a non petroleum based DOT 3, DOT 4 or Super DOT 4 brake & clutch hydraulic fluid.

Super Dot 4 Brake Fluid is suitable for use where the vehicle manufacturer specifies DOT 3 or DOT 4 brake fluid.

Super Dot 4 Brake Fluid can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Penrite Brake Fluid Super Dot 4 Brake Fluid prior to first fill or before refilling the system.

Please Note:
Do not mix this product with SILICONE DOT 5 or MINERAL type brake fluids.
For vehicles that require mineral based products i.e. Citroen, Penrite LHM Plus should be used.
Not mixable with Silicone type assembly compounds
Avoid contact with skin, varnish & paint. If skin contact occurs wash with water.

Caution:
Brake Fluids are naturally hygroscopic and will absorb water from the air. This will lower the effectiveness of the product. After opening bottle, ensure cap is resealed tightly to avoid water contamination.

Specifications:
Colour: Amber
Density at 20°C, kg/L 1.069
Viscosity, Kinematic, cSt at -40°C 1147
Viscosity, Kinematic, cSt at 100°C 2.23
Equilibrium Reflux Boiling Point (wet), (typical) 183°C (361°F)
Equilibrium Reflux Boiling Point (dry), (typical) 275°C (525°F)

Direct Fit High-Output 300L/H Replacement Ethanol Friendly Fuel Pump

A true ethanol and petroleum friendly replacement fuel pump with flow/pressure capabilities to deliver fuel for up to 280kw at the wheels.

We recommend a Boxer Performance Parts In-Tank Fitting Kit for MY94-MY07 Impreza, WRX, STI, Forester + MY94-MY03 Liberty, Outback.

Note: Our High-Output Fuel Pumps do not have a check valve, therefore slightly longer ‘cranking’ periods are experience before the engine ‘fires-up’, this is a positive side-effect for engine longevity.

Raceworks One Way Check Valve

Suits:

Lowering Spring: MY97-02 SF Forester

Standard Height Spring: MY93-07 Impreza & WRX (This is a standard replacement, car will be lowered in any way)

King Springs use an easy to follow part numbering system to help customers know what type of springs they are purchasing simply look for the letters below in the part number.

• FL: Front lowered 30mm* than standard ride height.
• FR: Rear raised 20mm* higher than standard ride height ideal for bull bar's offroad and country driving.
• FS: Standard Height.
• RL: Rear 30mm* lower than standard ride height.
• RR: Rear raised 30-40mm above standard ride height ideal for heavy loads towing or LPG equipped vehicles.
• SL: Super low 40mm-40mm below standard ride height.

* Approximate values only will vary based on vehicle and asseccories

*If Unsure of Fitment, Please Contact Us to Confirm*