Products

Tuning Notes:

Because this upgraded solenoid affects the way that your vehicle controls boost, it is always recommended that you consult with a tuner immediately following installation. It is not recommended that you drive the car in a way that builds boost without doing so. If you have any questions, don't hesitate to get in touch with us directly!

Suits:

• 08-20 STI

Tired of that ugly OEM hood prop blocking your view of that beautiful boxer engine? Always wanted to open your hood with just a couple fingers? Annoyed that the hood prop is always in your way while you’re working in your engine bay? GrimmSpeed to the rescue. With meticulous design and quality materials, this kit delivers in a big way. We hate to use the "P" word, but designing this kit to be perfectly balanced was a requirement. Lift the hood halfway and you'll find a generous neutral zone. Leave your hood here for a sleek look at that local car show. Alternatively, a flick of the wrist is all that's required to coax your hood into its fully opened position. To close, simply hold the hood below its neutral zone and let go. No need to risk scratches or deformation by pushing your hood closed.

Design
We began by mapping the hood and engine bay for a number of test vehicles in 3D CAD. From there, a lifting linkage was designed, analyzed, prototyped and tested. Our in-house 3D printer facilitated a fast, efficient design cycle and we were able to move into production using some of the worlds most advanced CNC machining equipment. What that means for you is a system that will fit and operate correctly, every single time, for years to come. The fender ball studs were also designed specifically for the application, to adapt our high-quality, American Made struts to the metric threads found on your Subaru. What about those struts, you ask? They're beefy. Custom built to our exacting specifications, these struts feature a large diameter body that provides excellent opening force without sacrificing smoothness and control.

Materials
With the use and exposure that a hood strut kit will see on a regular basis, material selection and finishing options are critically important. All brackets are machined from locally sourced 6061 Aluminum. After an initial quality inspection, each part is anodized with a sleek, black finish. The threaded ball studs are machined from Stainless Steel to ensure that no potentially corrosive material is being introduced to your vehicles chassis. The next key component is the struts themselves. More specifically, these are referred to as gas springs. Manufactured in the USA, these are of the highest quality and are used by OEMs around the world. These custom valved units (to perfectly match the weight of the WRX and STI hoods) are paired with black zinc hardware and a quick-release ball and socket. Last, but certainly not least, is the included hardware. All hardware is grade 8.8 or higher and black zinc coated for longevity.

Specifications

• Opens Hood 35% Higher Than OEM
• Better access and light for workingPerfect Hood Balance
• Struts are balanced for all GD chassis hoods
• Eliminates OEM Hood Prop
• No risk of hood falling, more access when wrenchingCNC Machined Brackets
• Machined for a perfect fitPremium Quality Struts
• Larger strut body for smoother operation, made in the USA!
• Durable Hard Anodized Finish
• Protects brackets from corrosion with an OEM finishFARO Arm Designed
•  Allows more precise design and a stronger, better fitting product

Tired of that ugly OEM hood prop blocking your view of that beautiful boxer engine? Always wanted to open your hood with just a couple fingers? Annoyed that the hood prop is always in your way while you’re working in your engine bay? GrimmSpeed to the rescue. With meticulous design and quality materials, this kit delivers in a big way. We hate to use the "P" word, but designing this kit to be perfectly balanced was a requirement. Lift the hood halfway and you'll find a generous neutral zone. Leave your hood here for a sleek look at that local car show. Alternatively, a flick of the wrist is all that's required to coax your hood into its fully opened position. To close, simply hold the hood below its neutral zone and let go. No need to risk scratches or deformation by pushing your hood closed.

Design
We began by mapping the hood and engine bay for a number of test vehicles in 3D CAD. From there, a lifting linkage was designed, analyzed, prototyped and tested. Our in-house 3D printer facilitated a fast, efficient design cycle and we were able to move into production using some of the worlds most advanced CNC machining equipment. What that means for you is a system that will fit and operate correctly, every single time, for years to come. The fender ball studs were also designed specifically for the application, to adapt our high-quality, American Made struts to the metric threads found on your Subaru. What about those struts, you ask? They're beefy. Custom built to our exacting specifications, these struts feature a large diameter body that provides excellent opening force without sacrificing smoothness and control.

Materials
With the use and exposure that a hood strut kit will see on a regular basis, material selection and finishing options are critically important. All brackets are machined from locally sourced 6061 Aluminum. After an initial quality inspection, each part is anodized with a sleek, black finish. The threaded ball studs are machined from Stainless Steel to ensure that no potentially corrosive material is being introduced to your vehicles chassis. The next key component is the struts themselves. More specifically, these are referred to as gas springs. Manufactured in the USA, these are of the highest quality and are used by OEMs around the world. Last, but certainly not least, is the included hardware. All hardware is grade 8.8 or higher and black zinc coated for longevity.

Specifications

• Opens Hood 35% Higher Than OEM
• Better access and light for workingPerfect Hood Balance
• Struts are balanced for all GD chassis hoods
• Eliminates OEM Hood Prop
• No risk of hood falling, more access when wrenchingCNC Machined Brackets
• Machined for a perfect fitPremium Quality Struts
• Larger strut body for smoother operation, made in the USA!
• Durable Hard Anodized Finish
• Protects brackets from corrosion with an OEM finishFARO Arm Designed
•  Allows more precise design and a stronger, better fitting product

What it does:

Greatly reduces the transer of heat from engine to intake manifold thus reducing heat soak.One of a kind true Phenolic material, not cutting board material like others.The cooler your intake temperature is the denser the air is which leads to more powerFor every 5 degree reduction in air temperature, increases power by 1%.The cooler and denser the intake air that the engine sucks in, increases the amount of air that can be mixed with fuel thus increasing efficiency.

How it works:

The intake air in your engine travels through the airbox into the turbo, then into the aluminum intake manifold. The air exits the intake manifold and goes directly into the engine.

While the intake air is within the intake manifold it picks up alot of heat from the aluminum intake manifold. This added heat reduces air density thus reducing engine power capabilities.In stock form your engine has a steel gasket between the intake manifold and engine which allows the heat from the engine to quickly transfer into the intake manifold. By replacing this steel gasket with the GrimmSpeed™ Phenolic Spacer you are greatly reducing the transfer of engine heat into the intake manifold.Phenolic Spacers are able to withstand 500+ degrees F. Subaru engines run at the hotter end of operation around 200 degrees F, so the Phenolic Spacer is well within its max running temperature. GrimmSpeed™ has tested that it is also safe to run race fuel, E85, and methanol with the Phenolic Spacers.The Phenolic Spacer will conduct 300-900 times less heat than the oem steel gasket.

What it does:

Greatly reduces the transer of heat from engine to intake manifold thus reducing heat soak.One of a kind true Phenolic material, not cutting board material like others.The cooler your intake temperature is the denser the air is which leads to more powerFor every 5 degree reduction in air temperature, increases power by 1%.The cooler and denser the intake air that the engine sucks in, increases the amount of air that can be mixed with fuel thus increasing efficiency.

How it works:

The intake air in your engine travels through the airbox into the turbo, then into the aluminum intake manifold. The air exits the intake manifold and goes directly into the engine.

While the intake air is within the intake manifold it picks up alot of heat from the aluminum intake manifold. This added heat reduces air density thus reducing engine power capabilities.In stock form your engine has a steel gasket between the intake manifold and engine which allows the heat from the engine to quickly transfer into the intake manifold. By replacing this steel gasket with the GrimmSpeed™ Phenolic Spacer you are greatly reducing the transfer of engine heat into the intake manifold.Phenolic Spacers are able to withstand 500+ degrees F. Subaru engines run at the hotter end of operation around 200 degrees F, so the Phenolic Spacer is well within its max running temperature. GrimmSpeed™ has tested that it is also safe to run race fuel, E85, and methanol with the Phenolic Spacers.The Phenolic Spacer will conduct 300-900 times less heat than the oem steel gasket.

H4 12V LED Globe Kit

• Precise beam control
• 5000 Lumens
• 20% Brighter
• 5700K White Light

Hardrace Extended Wheel Studs 76MM M12x1.25 20 Pack

Reinforced transmission mount made by hardened rubber create more strength than OEM rubber mounts, reduce gearbox move significantly, and provide the maximum output under gearbox acceleration.

• Offers a more direct connection between the Drive-train and Chassis
• Increasing the life span
• Helps to put power down to the wheels
• Direct bolt-on with OEM components
• Increased stability during cornering and acceleration

Suits 5 Speed  & VA WRX 6 Speed

Reinforced transmission mount made by hardened rubber create more strength than OEM rubber mounts, reduce gearbox move significantly, and provide the maximum output under gearbox acceleration.

• Offers a more direct connection between the Drive-train and Chassis
• Increasing the life span
• Helps to put power down to the wheels
• Direct bolt-on with OEM components
• Increased stability during cornering and acceleration

 6 Speed Only (Excluding 15+ VA WRX, requires 5MT mount)

Resin Poured Heart Shaped Tsurikawa

Light Grey/Black Strap

Hand Made in House

 

*Please note these are for ornamental use only,

not to be used as a pull handle or for towing*

The Stage 1 clutch kit uses an upgraded pressure plate with increased clamping pressure, combined with an organic friction disc. Stage 1 delivers substantial increases in performance and power holding capability whilst retaining near factory type driveability, and is designed primarily for high performance road going vehicles.

These kits feature a high quality cover with increased clamping force compared with standard, between 20-40% depending on the demands of the individual vehicle.

They use an organic friction disc to retain drive-ability similar to standard.

Specifications:

• Torque (Nm/ ftlbs) INC FOS 460/ 340
• Clamp Load 1050Kg (25% inc.)
• Flywheel Step -2.0mm
• Clutch Disc Diameter 230mm
• Clutch Disc Spline Count 24
• Clutch Disc Spline Diameter 25.2mm
• Weight 6.4 Kg

Suits:

• 06-07 WRX
• 08-14 WRX
• 15+ WRX***
• 08-12 Forester (SH)
• 10-14 Liberty GT (BM, BR)

 Note: Some makes and models may have had previous conversions or modifications, if unsure please contact us or use ask us form below.

*** Check With VIN

Designed to provide a direct plug and play solution for the Hella Super Tones.

Installs in minutes

No cutting or soldering required

Eliminates the need for the relay supplied by Hella

Protective sleeves for increased longevity

Designed to provide a direct plug and play solution for the Hella Super Tones.

Installs in minutes

No cutting or soldering required

Eliminates the need for the relay supplied by Hella

Protective sleeves for increased longevity

Includes 2x Hella Yellow Sharp Tones 12V 115 DB 

Hella Horns are known worldwide for being the loudest and most attractive looking Subaru aftermarket horns available. They deliver a high quality sound with OEM fitment. Trust Hella Horns for the ultimate in aftermarket WRX horns! This is for a REAL pair of YELLOW Hella Horns! If you are looking for LOUD horns that look great behind a grill this IS the kit you are looking for!

HELLA Sharp Tone Benefits:

• Sharp penetrating tone
• Robust premium look with distinctive yellow grille
• Ideal for rugged off-road usage
• Corrosion and water-spray resistant

Hella Sharp Tone Horn Features

• Power Consumption: 2 x 42W
• Frequency: 415 Hz (high tone) & 350 Hz (low tone)
• Acoustic Pressure: 115 dB(A)
• Nominal Voltage: 12V

Plug and Play harness

Includes: 2x Disc Horn 12V Super Tone 118Db Black W/Red Grille

Hella Twin Scroll Horn Pair 12v 115db