Iriway 7

$63.95

Tax included. Shipping calculated at checkout.

Iriway 7

Thread M14x1.25
Reach 19
Hex Size 16
Resisted Yes
Gap .7mm

Fine Iridium tipped centre electrode provides stable idle, improved fuel efficiency and lower emissions
Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
Corrugated ribs reduce the risk of flashover
Pure alumina silicate ceramic insulator, provides superior strength and better heat transfer
Triple seals prevent leakage
Copper core aids in heat removal

Price is per plug

Iriway LFR7AIX

$39.95

Tax included. Shipping calculated at checkout.

Iriway LFR7AIX

Thread M14 x 1.25
Reach 26.5
Hex Size 16
Resisted Yes
Gap .8mm

Price is per plug

Jelly Belly Air Freshener

$6.95

Tax included. Shipping calculated at checkout.

• The fabulous fresh n fruity scents of Jelly Belly
• Long lasting fragrance
• For use in the car, boat, office or home.
• Supplied with plastic hook for easy hanging.

K&N HP1008 Oil Filter

$23.95

Tax included. Shipping calculated at checkout.

• Heavy duty canister design
• Double rolled seal for superior sealing
• 1 inch nut cast into body for easy tightening or removal
• Predrilled lock wire hole for performance applications
• Compatible with all Blended, Synthetic and Conventional Motor Oils
• Designed to meet or exceed OEM requirements
• Backed by a 1 year limited warranty

Part# HP1008/Z436ST
Height Overall 65.00 mm
Seal Diameter 63.00 mm
Seam Diameter 69.50 mm
Thread MX20 x 1.5

K&N Panel Filter 01-7 WRX/STI 03-07 Forester 99-03 Liberty

$112.95

Tax included. Shipping calculated at checkout.

A simple to install Lifetime Air Filter is backed by the K&N Million Mile Limited Warranty

Designed to increase horsepower and acceleration while providing exceptional engine protection.

K&N Air Filters are made of 4 to 6 layers of cotton gauze sandwiched between two epoxy-coated aluminum wire screens

K&N Air Filters allow dramatically more air into an engine

K&N Air Filters are washable, reusable, and will protect your engine for the life of your vehicle

Height 29mm
Outside Length 279mm
Outside Width 167mm

K&N Panel Filter 08-20 WRX/STI 09-18 Forester 04-19 Liberty 12+ XV 14+ Levorg

$110.95

Tax included. Shipping calculated at checkout.

Features

Designed to increase horsepower and acceleration while providing exceptional engine protection.
K&N Air Filters are made of 4 to 6 layers of cotton gauze sandwiched between two epoxy-coated aluminum wire screens
K&N Air Filters allow dramatically more air into an engine
K&N Air Filters are washable & reusable

Height 24mm
Outside Length 222mm
Outside Width 217mm

K&N Panel Filter 12-16 BRZ/86

$129.95

Tax included. Shipping calculated at checkout.

Features

Designed to increase horsepower and acceleration while providing exceptional engine protection.
K&N Air Filters are made of 4 to 6 layers of cotton gauze sandwiched between two epoxy-coated aluminum wire screens
K&N Air Filters allow dramatically more air into an engine
K&N Air Filters are washable & reusable

Height 27mm
Outside Length 289mm
Outside Width 149mm

K&N Panel Filter 16+ BRZ/86

$129.95

Tax included. Shipping calculated at checkout.

Features:

Designed to increase horsepower and acceleration while providing exceptional engine protection.
K&N Air Filters are made of 4 to 6 layers of cotton gauze sandwiched between two epoxy-coated aluminum wire screens
K&N Air Filters allow dramatically more air into an engine
K&N Air Filters are washable & reusable.

Height 40mm
Outside Length 270mm

*Please measure OEM air filter to confirm fitment*

K&N Pod Filter Replacement 72mm

$108.95

Tax included. Shipping calculated at checkout.

K&N Pod Filter Replacement 72mm

Specifications:

Height 152mm
Outer Diameter Bottom 152mm
Outer Diameter Top 117mm

This is a replacement filter for the 72mm Process West Cold Air Intake Systems

K&N PS1008 Oil Filter

$14.95

Tax included. Shipping calculated at checkout.

• Heavy duty canister design
• Double rolled seal for superior sealing
• 1 inch nut cast into body for easy tightening or removal
• Predrilled lock wire hole for performance applications
• Compatible with all Blended, Synthetic and Conventional Motor Oils
• Designed to meet or exceed OEM requirements
• Backed by a 1 year limited warranty

Part# PS1008/Z436ST
Height Overall 65.00 mm
Seal Diameter 63.00 mm
Seam Diameter 69.50 mm
Thread MX20 x 1.5

Kap Industries Fire Extinguisher Bracket BRZ

Kap Industries Fire Extinguisher Bracket BRZ

$85.00

Tax included. Shipping calculated at checkout.

Kap Industries Fire Extinguisher Bracket BRZ

This Fire Extinguisher Bracket fits both Drivers Side and Passenger Side of the Toyota GT86 / Subaru BRZ / Scion FRS. Including Left Hand Drive and Right Hand Drive!

Made from 2mm Steel and Powder Coated Black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser-cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Every Purchase Includes:

1 x Toyota GT86/Subaru BRZ/Scion FRS Fire Extinguisher Bracket
2 x M5 High Tensile Steel Locknuts
2 x M5 High Tensile Steel Hex Bolts

How to Install:

Undo front seat bolts with an E Torx E10 or Socket that will fit.
Place the extinguisher cage on the bracket.
Lift the front of the seat and slip bracket under.
Reinstall bolts and tighten up each bolt.

Please Note:

Seat bolts are easily cross-threaded.
Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

Note: Does Not Include Fire Extinguisher

Kap Industries Fire Extinguisher Bracket MY15-21 WRX & STI

Kap Industries Fire Extinguisher Bracket MY15-21 WRX & STI

$85.00

Tax included. Shipping calculated at checkout.

Kap Industries Fire Extinguisher Bracket MY15-21 WRX & STI

Fire Extinguisher Bracket designed for Subaru 2015 -2020 WRX and STI.

Also Suits:

-BR and BM Liberty/Outback

-SJ Forester.

Including left hand drive and right hand drive!

Made from 2mm steel and powder coated black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Note: Does not include fire extinguisher in photo.

Every Purchase Includes:

1 x Subaru WRX/STI 2015-2019 Fire Extinguisher Bracket
2 x M5 High Tensile Steel Locknuts
2 x M5 High Tensile Steel Hex Bolts

Please Note:

Seat bolts are easily cross threaded.
Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

Kap Industries Fire Extinguisher Bracket MY22+ WRX (VB/VN)

Kap Industries Fire Extinguisher Bracket MY22+ WRX (VB/VN)

$85.00

Tax included. Shipping calculated at checkout.

Kap Industries Fire Extinguisher Bracket MY22+ WRX (VB/VN)

The bracket fits both drivers side and passenger side, suitable for both left-hand and right-hand drive. For an extra measure of safety, you can install a bracket and have fire extinguishers on both sides of your car.

About Kap Industries

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Every Purchase Includes:

1 x Subaru Bracket Pre 2015
2 x M5 High Tensile Steel Nylocks
2 x M5 High Tensile Steel Hex Bolts

Please Note:

Seat bolts are easily cross threaded.
Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
Please be careful when installing. Kap Industries takes no responsibility for incorrect install.
Fire Extinguisher not included

Kap Industries Fire Extinguisher Bracket MY97-2014 WRX & STI

Kap Industries Fire Extinguisher Bracket MY97-2014 WRX & STI

$85.00

Tax included. Shipping calculated at checkout.

Kap Industries Fire Extinguisher Bracket MY97-2014 WRX & STI

The bracket fits both drivers side and passenger side, suitable for both left-hand and right-hand drive. For an extra measure of safety, you can install a bracket and have fire extinguishers on both sides of your car.

About Kap Industries

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Note: Does not include fire extinguisher in photo.

Every Purchase Includes:

1 x Subaru Bracket Pre 2015
2 x M5 High Tensile Steel Nylocks
2 x M5 High Tensile Steel Hex Bolts

Please Note:

Seat bolts are easily cross threaded.
Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

Kap Industries Fire Extinguisher Bracket XV (Early Model)

Kap Industries Fire Extinguisher Bracket XV (Early Model)

$85.00

Tax included. Shipping calculated at checkout.

Kap Industries Fire Extinguisher Bracket XV (Early Model)

Fire Extinguisher Bracket designed for Subaru XV

Including left hand drive and right hand drive!

Made from 2mm steel and powder coated black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!

Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.

Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Note: Does not include fire extinguisher in photo.

Every Purchase Includes:

1 x Subaru XV Fire Extinguisher Bracket
2 x M5 High Tensile Steel Locknuts
2 x M5 High Tensile Steel Hex Bolts

Please Note:

Seat bolts are easily cross threaded.
Kap Industries Brackets are only to be used with metal strapped extinguisher cages.
Please be careful when installing. Kap Industries takes no responsibility for incorrect install.

Ken Block #43 Circle Sticker

$4.95

Tax included. Shipping calculated at checkout.

Ken Block #43 Circle Sticker

8cm x 8cm

or

5cm x 5cm

Kids SJ1000 Short Sleeve Tee

$20.00

Tax included. Shipping calculated at checkout.

Kids SJ1000 Shirt Sleeve Tee

Unisex Sizing

Kitten Ultra Glo-Wash 1L

$11.95

Tax included. Shipping calculated at checkout.

Kitten Ultra Glo-Wash 1L

• Glo Wash is specially designed to keep your car looking in showroom condition and is also ideal for use on boats
• It helps to preserve your car's paint and finish by removing stubborn road grime that can become ingrained and cause paintwork to deteriorate

Kitten Ultra Wash'N'Wax 1L

$13.95

Tax included. Shipping calculated at checkout.

Kitten Ultra Wash'N'Wax 1L

• Wash 'n' Wax is a two-in-one product, which combines a special blend of high-quality cleaning agents and protective waxes
• It removes heavy road grime and leaves a protective wax coating on your car as you wash
• Ordinary household detergents often contain salt, which causes corrosion
• Wash 'n' Wax formula inhibits rust forming while you wash your car
• It creates a lasting shine and is also ideal for boats

Koyorad OE Replacement Radiator 04-06 GT Liberty EJ20 (BL)

Koyorad OE Replacement Radiator 04-06 GT Liberty EJ20 (BL)

$325.00

Tax included. Shipping calculated at checkout.

Koyorad OE Replacement Radiator 04-06 GT Liberty EJ20 (BL)

If unsure please confirm fitment with VIN Number

Koyorad OE Replacement Radiator 04-07 NA Liberty EJ25/EJ20 (BL)

Koyorad OE Replacement Radiator 04-07 NA Liberty EJ25/EJ20 (BL)

$325.00

Tax included. Shipping calculated at checkout.

Koyorad OE Replacement Radiator 04-07 NA Liberty EJ25/EJ20 (BL)

If unsure please confirm fitment with VIN Number

Koyorad OE Replacement Radiator 04-09 H6 Liberty (BL)

$325.00

Tax included. Shipping calculated at checkout.

Koyorad OE Replacement Radiator 04-09 H6 Liberty (BL)

If unsure please confirm fitment with VIN Number

Koyorad OE Replacement Radiator 06-09 GT Liberty EJ25 (BL)

Koyorad OE Replacement Radiator 06-09 GT Liberty EJ25 (BL)

$325.00

Tax included. Shipping calculated at checkout.

Koyorad OE Replacement Radiator 06-09 GT Liberty EJ25 (BL)

If unsure please confirm fitment with VIN Number

Koyorad OE Replacement Radiator 1994-00 Impreza WRX

Koyorad OE Replacement Radiator 1994-00 Impreza WRX

$325.00

Tax included. Shipping calculated at checkout.

Specifications:
Core Height (mm) 670
Core Width (mm) 395
Core Thickness (mm) 25
Inlet Diameter (mm) 39
Outlet Diameter (mm) 39

If unsure please confirm fitment with VIN Number

Koyorad OE Replacement Radiator 1997-02 Forester Non Turbo

Koyorad OE Replacement Radiator 1997-02 Forester Non Turbo

$325.00

Tax included. Shipping calculated at checkout.

OE Style Replacement Radiator for the 1997-02 Forester Non Turbo (SF)

If unsure please confirm fitment with VIN Number

Koyorad OE Replacement Radiator 1997-02 GT Forester

Koyorad OE Replacement Radiator 1997-02 GT Forester

$325.00

Tax included. Shipping calculated at checkout.

OE Style Replacement Radiator for the 1997-02 GT Forester (SF)

Specifications:

Core Height (mm) 340
Core Width (mm) 686
Core Thickness (mm) 16

Automatic Option is only available in Adrad Brand

If unsure please confirm fitment with VIN Number

Koyorad OE Replacement Radiator 2001-02 Impreza WRX

Koyorad OE Replacement Radiator 2001-02 Impreza WRX

$325.00

Tax included. Shipping calculated at checkout.

OE Style Replacement Radiator for the 2001-02 Impreza WRX (Bug Eye)

Specifications:

Core Height (mm) 340
Core Width (mm) 686
Core Thickness (mm) 25

If unsure please confirm fitment with VIN Number

Koyorad OE Replacement Radiator 2003-07 Impreza WRX & STI

Koyorad OE Replacement Radiator 2003-07 Impreza WRX & STI

$325.00

Tax included. Shipping calculated at checkout.

OE Style Replacement Radiator for the 2003-07 Impreza WRX (Blob & Hawk Eye)

Specifications:

Core Height (mm) 340
Core Width (mm) 686
Core Thickness (mm) 25

If unsure please confirm fitment with VIN Number

Koyorad OE Replacement Radiator 2003-07 NA Forester SG

Koyorad OE Replacement Radiator 2003-07 NA Forester SG

$325.00

Tax included. Shipping calculated at checkout.

OE Style Replacement Radiator for the 2003-07 NA Forester SG

If unsure please confirm fitment with VIN Number

Products

Please Select