Impreza WRX 08-14

The Process West Engine Cover Garnish is finished in an attractive and durable wrinkle coat. Available in both red or black its a great alternative to the standard dull cover.

This part is supplied with all the fixings to complete the job.

Details:

• Fits in factory location
• Supplied with all necessary parts to complete the install
• Available in Red or Black wrinkle coat finish

Genuine Subaru Water Pump Seal #21116AA010

*If Unsure Please Confirm With VIN Number*

 Generic image used, actual product may vary

Genuine Subaru Lower Ball Joint 

Genuine Subaru Camshaft Oil Seal with AVCS (Active Valve Control System)

1x Per Camshaft Required

Hella Horns are known worldwide for being the loudest and most attractive looking Subaru aftermarket horns available. They deliver a high quality sound with OEM fitment. Trust Hella Horns for the ultimate in aftermarket WRX horns! This is for a REAL pair of YELLOW Hella Horns! If you are looking for LOUD horns that look great behind a grill this IS the kit you are looking for!

HELLA Sharp Tone Benefits:

• Sharp penetrating tone
• Robust premium look with distinctive yellow grille
• Ideal for rugged off-road usage
• Corrosion and water-spray resistant

Hella Sharp Tone Horn Features

• Power Consumption: 2 x 42W
• Frequency: 415 Hz (high tone) & 350 Hz (low tone)
• Acoustic Pressure: 115 dB(A)
• Nominal Voltage: 12V

Plug and Play harness

Torque Solution turbo Oil feed Line kit for Subaru EJ stock location configurations. The OEM oil feed hard lines are fragile and are easily damaged when swapping or working on your turbo. Our kit converts the hard lines to stainless steel braided -4an lines w/ T Fitting and provides all the necessary banjo fittings / copper washers to complete the job.

Features:

• -4an Stainless Steel Teflon Lines
• Zinc Coated Hardware for Corrosion Resistance
• Limited Lifetime Warranty

Fits:

• 2006-2014 WRX (EJ255)
• 2006-2020 STI (EJ257)
• 2003-2012 Forester XT (EJ255)
• 2007-2009 Liberty GT (EJ255)

Genuine Subaru Spark Plug

NGK SILFR6A

Price is Per Plug

4x Required Per Car

• 07-09 GT Liberty
  
• 09-12 XT Forester
• 08-14 Impreza WRX & STI
• 15-20 STI

*If Unsure Please Confirm With VIN Number*

Direct Fit High-Output 300L/H Replacement Ethanol Friendly Fuel Pump

A true ethanol and petroleum friendly replacement fuel pump with flow/pressure capabilities to deliver fuel for up to 280kw at the wheels.

We recommend a Boxer Performance Parts In-Tank Fitting Kit for MY94-MY07 Impreza, WRX, STI, Forester + MY94-MY03 Liberty, Outback.

Note: Our High-Output Fuel Pumps do not have a check valve, therefore slightly longer ‘cranking’ periods are experience before the engine ‘fires-up’, this is a positive side-effect for engine longevity.

Raceworks One Way Check Valve

MAC valves are used world-wide by many industry leading motorsport brands and workshops and is a brand you can trust.

Mac 35 Series Valve

The MAC 35 series is a direct solenoid operated 3-way poppet valve.  It features a short stroke solenoid, a balanced poppet and powerful return spring.  These features translate into high shifting forces, fast consistent response times, and long life.  Our unique balanced design means virsatility in piping – the valve can be configured as a 3-way or 2-way – normally closed or normally open or can be used for vacuum, divertor or selector applications. 

Features:

• Genuine MAC Solenoid Operated 3-Way Valve
• Turbosmart Silicone Vacuum Hose
• Nickel-Plated Barb Fittings
• Vehicle Specific Black Finish Bracket
• Vehicle Specific Plug-and-Play Wiring Harness

Tuning Notes:

Because this upgraded solenoid affects the way that your vehicle controls boost, it is always recommended that you consult with a tuner immediately following installation. It is not recommended that you drive the car in a way that builds boost without doing so. If you have any questions, don't hesitate to get in touch with us directly!

Suits:

• 08-14 Subaru WRX
• 08-12 Subaru Forester XT SH
• 04-09 Subaru Liberty GT BL/BP

Omni Power USA 3, 4 & 5 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.

Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA 4 Bar MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.

With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage.

Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.

 Key features:

• Cases are designed to withstand in excess of 130 PSI without leaking
• -40 to 260 degrees Fahrenheit temperature operating range
• Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).
• Automatic temperature compensation.
• True linear scaling for perfect drivability at all boost and vacuum levels.
• Compatible with all aftermarket engine management systems.
• Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.
• Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.
• Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.
• Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.

*Please note vehicle will require tuning after installation*

The PSR Hella Brackets come with slotted mounting points for horn assemblies. These allow for fine-tuning of the position of horns to work with unique setups. By offering multiple mounting points, the connection between the radiator support and bracket is solidified and reduces unwanted flex under all driving conditions.

MAC 35 series are the go-to solenoid valve for automotive boost control due to their exceptionally rugged and reliable design. Features waterproof female connector, 1/8″ BSP threads, and includes two 7mm hose tails.

Tuning Notes:

Because this upgraded solenoid affects the way that your vehicle controls boost, it is always recommended that you consult with a tuner immediately following installation. It is not recommended that you drive the car in a way that builds boost without doing so. If you have any questions, don't hesitate to get in touch with us directly!

Suits:

• All Turbo Subaru Models

• Ceramic Stealth Advanced Technology for whisper quiet braking, silky smooth operation, noticeably less dust.
• Noise Absorbing Shims for reduced transmission of vibration and noise from the brake pad during extreme braking.

Suits:

• 08-14 WRX (2-Piston)
• 03-07 Forester XT SG (2-Piston)**
• 08-12 Forester XT SH (2-Piston)
• 12+ BRZ/86

**SG Forester has two possible caliper options either 4-Piston DB1170 or 2-Piston DB1491. Check pad shapes to confirm correct pad for your model.

 Please confirm pad shape by comparing existing pad against the blueprint in the second photo.

DBA’s Street Series T2 rotor provides all the benefits of DBA’s Street Series direct replacement rotors with the added benefit of performance braking through the introduction of DBA’s patented T2 slot design.

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite.

DBA’s revolutionary universal slot design also eliminates the need for separate left and right slot designs seen in traditional rotor designs.

We recommend the T2 slot design for more intensive braking applications.

Specifications:

• Diameter 294 mm
• Height 57 mm 
• Thickness 24 mm 
• Min Thickness 22 mm
• Inner Diameter 58 mm
• Number of Holes 5
• Pitch Circle Ø 100 mm

 Suits:

• 99-14 Impreza WRX 
• 03-13 Forester 
• 04-09 Liberty
• 98-15 Outback
• 12-18 BRZ/86 

Please measure factory discs and compare with the specifications above to confirm fitment.

  Price is per disc, 2 required per vehicle

The Process West Turbo Adapter is a replacement Turbo to Intercooler Hose adapter that comes with the Process West Verticooler kit for 2008 WRX.

Details:

• Allows for Silicone couplers/joiners to join to 08 WRX TD04 Turbo
• Bolts straight onto 08 WRX TD04 Turbo

SUPPORTS 600+ HORSEPOWER AT 40 PSI 13.5V

GSS 39MM Fuel Pump Family Design Update: Generation 3 (G3)

Walbro / TI Automotive has made pump outlet updates to our popular line of 255LPH 39MM Gerotor fuel pumps. The new outlet design is engineered to improve fitting robustness while maintaining the current electrical connection configuration. The update retains our proven pump technology and these third generation pumps will continue to be manufactured in the Caro, MI plant. With the updated outlet design, we will be superseding the current GSS340, GSS341, and GSS342 pumps.

Walbro / TI Automotive GSS350G3, GSS351G3, GSS352G3 Fuel Pumps 600+ horsepower!

Walbro / TI Automotive's new GSS fuel pumps are lapping the field with increased flow rates of 350 lph. Our proven, robust gerotor technology is inside every 39mm straightwall GSS 350, perfect for forced induction (turbocharged and supercharged) applications. We've launched three 350 lph pump versions giving you multiple options to fuel your adrenaline because fast matters!

Features:

• 350 LPH / 90 GPH RATED AT 40PSI 13.5V
• Features an upgraded outlet design with improved one piece construction
• Fuel: Gas
• OE quality
• 39mm diameter
• Easily mountable to new or existing in-tank hangers
• Positive displacement for robust performance
• Manufactured in TI Automotive's Caro, Michigan plant - Made In USA.

What's Included:

• 1 x GSS352 Fuel Pump Only
• 1 x Installation Fitting Kit